Problem:

Certain Insights Advisor features differentiate between RHEL and OCP advisor

Goal:

Address top priority UI misalignments between RHEL and OCP advisor. Address UI features dropped from Insights ADvisor for OCP GA.

Scope:

Specific tasks and priority of them tracked in https://issues.redhat.com/browse/CCXDEV-7432

Managing PVs at scale for a fleet creates difficulties where "one size does not fit all". The ability for SRE to deploy prometheus with PVs and have retention based an on a desired size would enable easier management of these volumes across the fleet. 

The prometheus-operator exposes retentionSize.

This is a feature request to enable this configuration option via CMO cluster-monitoring-config ConfigMap.

cc Simon Pasquier  

Problem Alignment

The Problem

Today, all configuration for setting individual, for example, routing configuration is done via a single configuration file that only admins have access to. If an environment uses multiple tenants and each tenant, for example, has different systems that they are using to notify teams in case of an issue, then someone needs to file a request w/ an admin to add the required settings.

That can be bothersome for individual teams, since requests like that usually disappear in the backlog of an administrator. At the same time, administrators might get tons of requests that they have to look at and prioritize, which takes them away from more crucial work.

We would like to introduce a more self service approach whereas individual teams can create their own configuration for their needs w/o the administrators involvement.

Last but not least, since Monitoring is deployed as a Core service of OpenShift there are multiple restrictions that the SRE team has to apply to all OSD and ROSA clusters. One restriction is the ability for customers to use the central Alertmanager that is owned and managed by the SRE team. They can't give access to the central managed secret due to security concerns so that users can add their own routing information.

High-Level Approach

Provide a new API (based on the Operator CRD approach) as part of the Prometheus Operator that allows creating a subset of the Alertmanager configuration without touching the central Alertmanager configuration file.

Please note that we do not plan to support additional individual webhooks with this work. Customers will need to deploy their own version of the third party webhooks.

Goal & Success

• Allow users to deploy individual configurations that allow setting up Alertmanager for their needs without an administrator.

Solution Alignment

Key Capabilities

• As an OpenShift administrator, I want to control who can CRUD individual configuration so that I can make sure that any unknown third person can touch the central Alertmanager instance shipped within OpenShift Monitoring.
• As a team owner, I want to deploy a routing configuration to push notifications for alerts to my system of choice.

Key Flows

Team A wants to send all their important notifications to a specific Slack channel.

• Administrator gives permission to Team A to allow creating a new configuration CR in their individual namespace.
• Team A creates a new configuration CR.
• Team A configures what alerts should go into their Slack channel.
• Open Questions & Key Decisions (optional)
• Do we want to improve anything inside the developer console to allow configuration?

Copy/paste from [_https://github.com/openshift-cs/managed-openshift/issues/60_]

Which service is this feature request for?
OpenShift Dedicated and Red Hat OpenShift Service on AWS

What are you trying to do?
Allow ROSA/OSD to integrate with AWS Managed Prometheus.

Describe the solution you'd like
Remote-write of metrics is supported in OpenShift but it does not work with AWS Managed Prometheus since AWS Managed Prometheus requires AWS SigV4 auth.

• Note that Prometheus supports AWS SigV4 since v2.26 and OpenShift 4.9 uses v2.29.

Describe alternatives you've considered
There is the workaround to use the "AWS SigV4 Proxy" but I'd think this is not properly supported by RH.
https://mobb.ninja/docs/rosa/cluster-metrics-to-aws-prometheus/

Additional context
The customer wants to use an open and portable solution to centralize metrics storage and analysis. If they also deploy to other clouds, they don't want to have to re-configure. Since most clouds offer a Prometheus service (or it's easy to self-manage Prometheus), app migration should be simplified.

OCP/Telco Definition of Done
Feature Template descriptions and documentation.

Feature Overview.

Early customer feedback is that they see SNO as a great solution covering smaller footprint deployment, but are wondering what is the evolution story OpenShift is going to provide where more capacity or high availability are needed in the future.

While migration tooling (moving workload/config to new cluster) could be a mid-term solution, customer desire is not to include extra hardware to be involved in this process.

 For Telecommunications Providers, at the Far Edge they intend to start small and then grow. Many of these operators will start with a SNO-based DU deployment as an initial investment, but as DUs evolve, different segments of the radio spectrum are added, various radio hardware is provisioned and features delivered to the Far Edge, the Telecommunication Providers desire the ability for their Far Edge deployments to scale up from 1 node to 2 nodes to n nodes. On the opposite side of the spectrum from SNO is MMIMO where there is a robust cluster and workloads use HPA.

Goals

• Provide the capability to expand a single replica control plane topology to host more workloads capacity - add worker
• Provide the capability to expand a single replica control plane to be a highly available control plane
• To satisfy MMIMO Telecommunications providers will want the ability to scale a SNO to a multi-node cluster that can support HPA.
• Telecommunications providers do not want workload (DU specifically) downtime when migrating from SNO to a multi-node cluster.
• Telecommunications providers wish to be able to scale from one to two or more nodes to support a variety of radio hardware.
• Support CP scaling (CP HA) for 2 node cluster, 3 node cluster and n node cluster. As the number of nodes in the cluster increases so does the failure domain of the cluster. The cluster is now supporting more cell sectors and therefore has more of a need for HA and resiliency including the cluster CP.

Requirements

• TBD

(Optional) Use Cases

This Section:

• Main success scenarios - high-level user stories
• Alternate flow/scenarios - high-level user stories
• ...

Questions to answer…

• ...

Out of Scope

• …

Background, and strategic fit

This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

• ...

Customer Considerations

• ...

Documentation Considerations

Questions to be addressed:

• What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
• Does this feature have doc impact?
• New Content, Updates to existing content, Release Note, or No Doc Impact
• If unsure and no Technical Writer is available, please contact Content Strategy.
• What concepts do customers need to understand to be successful in [action]?
• How do we expect customers will use the feature? For what purpose(s)?
• What reference material might a customer want/need to complete [action]?
• Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
• What is the doc impact (New Content, Updates to existing content, or Release Note)?

Feature Overview

We drive OpenShift cross-market customer success and new customer adoption with constant improvements and feature additions to the existing capabilities of our OpenShift Core Networking (SDN and Network Edge). This feature captures that natural progression of the product.

Goals

• Feature enhancements (performance, scale, configuration, UX, ...)
• Modernization (incorporation and productization of new technologies)

Requirements

• Core Networking Stability
• Core Networking Performance and Scale
• Core Neworking Extensibility (Multus CNIs)
• Core Networking UX (Observability)
• Core Networking Security and Compliance

In Scope

• Network Edge (ingress, DNS, LB)
• SDN (CNI plugins, openshift-sdn, OVN, network policy, egressIP, egress Router, ...)
• Networking Observability

Out of Scope

There are definitely grey areas, but in general:

• CNV
• Service Mesh
• CNF

Documentation Considerations

Questions to be addressed:

• What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
• Does this feature have doc impact?
• New Content, Updates to existing content, Release Note, or No Doc Impact
• If unsure and no Technical Writer is available, please contact Content Strategy.
• What concepts do customers need to understand to be successful in [action]?
• How do we expect customers will use the feature? For what purpose(s)?
• What reference material might a customer want/need to complete [action]?
• Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
• What is the doc impact (New Content, Updates to existing content, or Release Note)?

tldr: three basic claims, the rest is explanation and one example

1. We cannot improve long term maintainability solely by fixing bugs.
2. Teams should be asked to produce designs for improving maintainability/debugability.
3. Specific maintenance items (or investigation of maintenance items), should be placed into planning as peer to PM requests and explicitly prioritized against them.

While bugs are an important metric, fixing bugs is different than investing in maintainability and debugability. Investing in fixing bugs will help alleviate immediate problems, but doesn't improve the ability to address future problems. You (may) get a code base with fewer bugs, but when you add a new feature, it will still be hard to debug problems and interactions. This pushes a code base towards stagnation where it gets harder and harder to add features.

One alternative is to ask teams to produce ideas for how they would improve future maintainability and debugability instead of focusing on immediate bugs. This would produce designs that make problem determination, bug resolution, and future feature additions faster over time.

I have a concrete example of one such outcome of focusing on bugs vs quality. We have resolved many bugs about communication failures with ingress by finding problems with point-to-point network communication. We have fixed the individual bugs, but have not improved the code for future debugging. In so doing, we chase many hard to diagnose problem across the stack. The alternative is to create a point-to-point network connectivity capability. this would immediately improve bug resolution and stability (detection) for kuryr, ovs, legacy sdn, network-edge, kube-apiserver, openshift-apiserver, authentication, and console. Bug fixing does not produce the same impact.

We need more investment in our future selves. Saying, "teams should reserve this" doesn't seem to be universally effective. Perhaps an approach that directly asks for designs and impacts and then follows up by placing the items directly in planning and prioritizing against PM feature requests would give teams the confidence to invest in these areas and give broad exposure to systemic problems.

Relevant links:

• Documentation:
  • Edge Diagnostics Scratchpad, our team's internal diagnostic guide.
  • Troubleshooting OCP networking issues - The complete guide, the SDN team's diagnostic guide.
  • Linux Performance, Brendan Gregg's guide to analyzing Linux performance issues.
  • RFC: A proper feedback loop on Alerts.
  • OpenShift Router Reload Technical Overview on Access.
  • Performance Scaling HAProxy with OpenShift on Access.
  • How to collect worker metrics to troubleshoot CPU load, memory pressure and interrupt issues and networking on worker nodes in OCP 4 on Access.
  • OpenShift Performance and Scale Knowledge Base on Mojo, results from OpenShift scalability testing.
  • Scalability and performance, OCP 4.5 documentation about the router's currently known scalability limits.
  • Scaling OpenShift Container Platform HAProxy Router, OCP 3.11 documentation about the manual performance configuration that was possible in OCP 3.
  • Timing web requests with cURL and Chrome from the Cloudflare blog.
  • tcpdump advanced filters, some useful tcpdump commands.
  • OpenShift SDN - Networking, OCP 3.11 documentation on the SDN (useful background reading).
  • Ingress Operator and Controller Status Conditions, design document for improved status condition reporting.
  • Observability tips for HAProxy, a slide deck by Willy Tarreau.
  • Interesting Traces - Out of Order versus Retransmissions, analysis using tshark.
  • The PCP Book: A Complete Documentation of Performance Co-Pilot, by Yogesh Babar.
  • Debugging kernel networking bug, brief guide to using SystemTap on RHCOS.
  • Troubleshooting throughput issues from the OCP 4.5 documentation.
  • Troubleshooting OpenShift Clusters and Workloads.
  • Red Hat Enterprise Linux Network Performance Tuning Guide (PDF).
  • openshift/enhancements#289 stability: point to point network check, a diagnostic built into the kube-apiserver operator.
• Diagnostic tools:
  • dropwatch to watch for packet drops.
  • ethtool to check NIC configuration.
  • iovisor/bcc: BCC - Tools for BPF-based Linux IO analysis, networking, monitoring, and more to trace and diagnose various issues in the networking stack.
  • r-curler to gather timing information about HTTP/HTTPS connections.
  • route-monitor, to monitor routes for reachability.
  • hping(3), a programmable packet generator.
  • OpenTracing / Jaeger in OpenShift.
  • node-problem-detector, a possible integration point for new diagnostics.
  • Using SystemTap by Brendan Gregg.
  • DTrace SystemTap cheatsheet (PDF).
• Visualization and more sophisticated diagnostic tools:
  • eldadru/ksniff, kubectl plugin for tcpdump & Wireshark.
  • ironcladlou/ditm, Dan's "Dan in the Middle" tool.
  • Skydive, network diagnostic and visualization tool.
  • ali, a "load testing tool capable of performing real-time analysis" with visualization.
• Testing tools:
  • stress-ng, a general stress-loading tool (CPU, filesystem, network, ...).
  • mb, the networking benchmarking tool written and used by Jiri Mencak from our Perf+Scale team.
• Case studies:
  • BZ1763206 is an example of diagnosing DNS latency/timeouts.
  • BZ1829779 Investigation details the diagnosis of route latency.
  • BZ1845545 is an example of diagnosing misconfigured DNS for an external LB.
  • Debugging network stalls on Kubernetes, from the GitHub Blog, about diagnosing Kubernetes performance issues related to ksoftirqd.

Feature Overview

• This Section:* High-Level description of the feature ie: Executive Summary

• Note: A Feature is a capability or a well defined set of functionality that delivers business value. Features can include additions or changes to existing functionality. Features can easily span multiple teams, and multiple releases.

Goals

• This Section:* Provide high-level goal statement, providing user context and expected user outcome(s) for this feature

• …

Requirements

• This Section:* A list of specific needs or objectives that a Feature must deliver to satisfy the Feature.. Some requirements will be flagged as MVP. If an MVP gets shifted, the feature shifts. If a non MVP requirement slips, it does not shift the feature.

(Optional) Use Cases

This Section: 

• Main success scenarios - high-level user stories

• Alternate flow/scenarios - high-level user stories

• ...

Questions to answer…

• ...

Out of Scope

• …

Background, and strategic fit

This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

• ...

Customer Considerations

• ...

Documentation Considerations

Questions to be addressed:

• What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?

• Does this feature have doc impact?  

• New Content, Updates to existing content,  Release Note, or No Doc Impact

• If unsure and no Technical Writer is available, please contact Content Strategy.

• What concepts do customers need to understand to be successful in [action]?

• How do we expect customers will use the feature? For what purpose(s)?

• What reference material might a customer want/need to complete [action]?

• Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.

• What is the doc impact (New Content, Updates to existing content, or Release Note)?

Feature Overview

• As an infrastructure owner, I want a repeatable method to quickly deploy the initial OpenShift cluster.

• As an infrastructure owner, I want to install the first (management, hub, “cluster 0”) cluster to manage other (standalone, hub, spoke, hub of hubs) clusters.

Goals

• Enable customers and partners to successfully deploy a single “first” cluster in disconnected, on-premises settings

Requirements

4.11 MVP Requirements

• Customers and partners needs to be able to download the installer
• Enable customers and partners to deploy a single “first” cluster (cluster 0) using single node, compact, or highly available topologies in disconnected, on-premises settings
• Installer must support advanced network settings such as static IP assignments, VLANs and NIC bonding for on-premises metal use cases, as well as DHCP and PXE provisioning environments.
• Installer needs to support automation, including integration with third-party deployment tools, as well as user-driven deployments.
• In the MVP automation has higher priority than interactive, user-driven deployments.
• For bare metal deployments, we cannot assume that users will provide us the credentials to manage hosts via their BMCs.
• Installer should prioritize support for platforms None, baremetal, and VMware.
• The installer will focus on a single version of OpenShift, and a different build artifact will be produced for each different version.
• The installer must not depend on a connected registry; however, the installer can optionally use a previously mirrored registry within the disconnected environment.

Use Cases

• As a Telco partner engineer (Site Engineer, Specialist, Field Engineer), I want to deploy an OpenShift cluster in production with limited or no additional hardware and don’t intend to deploy more OpenShift clusters [Isolated edge experience].
• As a Enterprise infrastructure owner, I want to manage the lifecycle of multiple clusters in 1 or more sites by first installing the first  (management, hub, “cluster 0”) cluster to manage other (standalone, hub, spoke, hub of hubs) clusters [Cluster before your cluster].
• As a Partner, I want to package OpenShift for large scale and/or distributed topology with my own software and/or hardware solution.
• As a large enterprise customer or Service Provider, I want to install a “HyperShift Tugboat” OpenShift cluster in order to offer a hosted OpenShift control plane at scale to my consumers (DevOps Engineers, tenants) that allows for fleet-level provisioning for low CAPEX and OPEX, much like AKS or GKE [Hypershift].
• As a new, novice to intermediate user (Enterprise Admin/Consumer, Telco Partner integrator, RH Solution Architect), I want to quickly deploy a small OpenShift cluster for Poc/Demo/Research purposes.

Questions to answer…

Out of Scope

Out of scope use cases (that are part of the Kubeframe/factory project):

• As a Partner (OEMs, ISVs), I want to install and pre-configure OpenShift with my hardware/software in my disconnected factory, while allowing further (minimal) reconfiguration of a subset of capabilities later at a different site by different set of users (end customer) [Embedded OpenShift].
• As an Infrastructure Admin at an Enterprise customer with multiple remote sites, I want to pre-provision OpenShift centrally prior to shipping and activating the clusters in remote sites.

Background, and strategic fit

• This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

1. The user has only access to the target nodes that will form the cluster and will boot them with the image presented locally via a USB stick. This scenario is common in sites with restricted access such as government infra where only users with security clearance can interact with the installation, where software is allowed to enter in the premises (in a USB, DVD, SD card, etc.) but never allowed to come back out. Users can't enter supporting devices such as laptops or phones.
2. The user has access to the target nodes remotely to their BMCs (e.g. iDrac, iLo) and can map an image as virtual media from their computer. This scenario is common in data centers where the customer provides network access to the BMCs of the target nodes.
3. We cannot assume that we will have access to a computer to run an installer or installer helper software.

Customer Considerations

• ...

Documentation Considerations

Questions to be addressed:

• What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
• Does this feature have doc impact?
• New Content, Updates to existing content, Release Note, or No Doc Impact
• If unsure and no Technical Writer is available, please contact Content Strategy.
• What concepts do customers need to understand to be successful in [action]?
• How do we expect customers will use the feature? For what purpose(s)?
• What reference material might a customer want/need to complete [action]?
• Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
• What is the doc impact (New Content, Updates to existing content, or Release Note)?

References

• Bootable Ephemeral Installer Image for Disconnected Cluster 0 Deployments

Feature Overview

The AWS-specific code added in OCPPLAN-6006 needs to become GA and with this we want to introduce a couple of Day2 improvements.
Currently the AWS tags are defined and applied at installation time only and saved in the infrastructure CRD's status field for further operator use, which in turn just add the tags during creation.

Saving in the status field means it's not included in Velero backups, which is a crucial feature for customers and Day2.
Thus the status.resourceTags field should be deprecated in favour of a newly created spec.resourceTags with the same content. The installer should only populate the spec, consumers of the infrastructure CRD must favour the spec over the status definition if both are supplied, otherwise the status should be honored and a warning shall be issued.

Being part of the spec, the behaviour should also tag existing resources that do not have the tags yet and once the tags in the infrastructure CRD are changed all the AWS resources should be updated accordingly.

On AWS this can be done without re-creating any resources (the behaviour is basically an upsert by tag key) and is possible without service interruption as it is a metadata operation.

Tag deletes continue to be out of scope, as the customer can still have custom tags applied to the resources that we do not want to delete.

Due to the ongoing intree/out of tree split on the cloud and CSI providers, this should not apply to clusters with intree providers (!= "external").

Once confident we have all components updated, we should introduce an end2end test that makes sure we never create resources that are untagged.

After that, we can remove the experimental flag and make this a GA feature.

Goals

• Inclusion in the cluster backups
• Flexibility of changing tags during cluster lifetime, without recreating the whole cluster

Requirements

• This Section:* A list of specific needs or objectives that a Feature must deliver to satisfy the Feature.. Some requirements will be flagged as MVP. If an MVP gets shifted, the feature shifts. If a non MVP requirement slips, it does not shift the feature.

List any affected packages or components.

• Installer
• Cluster Infrastructure
• Storage
• Node
• NetworkEdge
• Internal Registry
• CCO

Feature Overview

Customers are asking for improvements to the upgrade experience (both over-the-air and disconnected). This is a feature tracking epics required to get that work done.  

Goals

1. Have an option to do upgrades in more discrete steps under admin control. Specifically, these steps are: 
   • Control plane upgrade
   • Worker nodes upgrade
   • Workload enabling upgrade (i..e. Router, other components) or infra nodes
2. Better visibility into any errors during the upgrades and documentation of what they error means and how to recover. 
3. An user experience around an end-2-end back-up and restore after a failed upgrade 
4. OTA-810  - Better Documentation: 
   • Backup procedures before upgrades. 
   • More control over worker upgrades (with tagged pools between user Vs admin)
   • The kinds of pre-upgrade tests that are run, the errors that are flagged and what they mean and how to address them. 
   • Better explanation of each discrete step in upgrades, and what each CVO Operator is doing and potential errors, troubleshooting and mitigating actions.

References

• OpenShift Upgrades Customer Issues Discussion -6/22/2023
• Select Customer Experiences and Feedback on Upgrades

Feature Overview

Enable sharing ConfigMap and Secret across namespaces

Requirements

Questions to answer…

NA

Out of Scope

NA

Background, and strategic fit

Consumption of RHEL entitlements has been a challenge on OCP 4 since it moved to a cluster-based entitlement model compared to the node-based (RHEL subscription manager) entitlement mode. In order to provide a sufficiently similar experience to OCP 3, the entitlement certificates that are made available on the cluster (OCPBU-93) should be shared across namespaces in order to prevent the need for cluster admin to copy these entitlements in each namespace which leads to additional operational challenges for updating and refreshing them. 

Documentation Considerations

Questions to be addressed:
 * What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
 * Does this feature have doc impact?
 * New Content, Updates to existing content, Release Note, or No Doc Impact
 * If unsure and no Technical Writer is available, please contact Content Strategy.
 * What concepts do customers need to understand to be successful in [action]?
 * How do we expect customers will use the feature? For what purpose(s)?
 * What reference material might a customer want/need to complete [action]?
 * Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
 * What is the doc impact (New Content, Updates to existing content, or Release Note)?

OCP/Telco Definition of Done
Feature Template descriptions and documentation.
<--- Cut-n-Paste the entire contents of this description into your new Feature --->
<--- Remove the descriptive text as appropriate --->

Feature Overview

• As RH OpenShift Product Owners, we want to enable new providers/platforms/service with varying levels of capabilities and integration with minimal reliance on OpenShift Engineering.
• As a new provider/platform partner, I want to enable my solution (hardware and/or software) with OpenShift with minimal effort.

Problem

• It is currently challenging for us to enable new platforms / providers without taking the heavy burden on doing the platform specific development ourselves.

Goals

• We want to enable the long-tail new platforms/providers to expand our reach into new markets and/or support new use cases.
• We want to remove strict dependencies we have on Engineering teams to review, support and test new providers.
• We want to lower the effort required for onboarding new platforms/providers.
• We want to enable new platform/providers to self-certify.
• We want to define tiered model for provider/platform integration that delineates ownership and responsibilities throughout new provider/platform development lifecycle and support model.
• We want to reduce time to onboard new provider/platform – ideally to a single release.
• We want to maintain consistent customer experience across all providers/platforms.

Requirements

• Step-by-step guide on how to add a new platform/provider for each tier
• Certification tool for partner to self-certify
• Certification tool results for (at least) each Y/minor release submitted by partner to Red Hat for acknowledgement
• DCI program to enable partners to run CI with OpenShift on their platform
• Well documented, accessible, and up-to-date test suites for providing the test coverage of the partner
• CI includes upgrade testing of OpenShift with partner's components
• Partner component upgrade failure should not block OpenShift upgrade
• Partner code is available in repositories in the openshift org on github with an open source license compatible with OpenShift

(Optional) Use Cases

This Section:

• Main success scenarios - high-level user stories
• Alternate flow/scenarios - high-level user stories
• ...

Questions to answer…

• ...

Out of Scope

• …

Background, and strategic fit

This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

• ...

Customer Considerations

• ...

Documentation Considerations

Questions to be addressed:

• What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
• Does this feature have doc impact?
• New Content, Updates to existing content, Release Note, or No Doc Impact
• If unsure and no Technical Writer is available, please contact Content Strategy.
• What concepts do customers need to understand to be successful in [action]?
• How do we expect customers will use the feature? For what purpose(s)?
• What reference material might a customer want/need to complete [action]?
• Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
• What is the doc impact (New Content, Updates to existing content, or Release Note)?

References

• [ Notes - OpenShift Everywhere - Onboarding new providers/platforms|https://www.google.com/url?q=[https://docs.google.com/document/d/1M1zLG2-wmkeCWTS8omN5G8vsDKvDeZfmegsi7cCVh-U/edit?usp%3Dsharing&sa=D&source=calendar&ust=1641920246517943&usg=AOvVaw2ZIl_XuE7OsSr4wCmRjOp3]] 
• OKD Installer Architecture Brainstorming Working Group Meeting Minutes
• New-Platform Documentation Working Group Meeting Minutes

Goal

Increase integration of Shipwright, Tekton, Argo CD in OpenShift GitOps with OpenShift platform and related products such as ACM.

Summary (PM+lead)

https://issues.redhat.com/browse/AUTH-2 revealed that, in prinicipal, Pod Security Admission is possible to integrate into OpenShift while retaining SCC functionality.

This epic is about the concrete steps to enable Pod Security Admission by default in OpenShift

Motivation (PM+lead)

Goals (lead)

• Enable Pod Security Admission in "restricted" policy level by default
• Migrate existing core workloads to comply to the "restricted" pod security policy level

Non-Goals (lead)

• Other OpenShift workloads must be migrated by the individual responsible teams.

Deliverables

Proposal (lead)

Enhancement - https://github.com/openshift/enhancements/pull/1010

User Stories (PM)

Dependencies (internal and external, lead)

Previous Work (lead)

Open questions (lead)

1. ...

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

• https://github.com/openshift/cluster-authentication-operator/pull/570
• https://github.com/openshift/cluster-csi-snapshot-controller-operator/pull/120
• https://github.com/openshift/cluster-samples-operator/pull/425

Epic Goal

HyperShift provisions OpenShift clusters with externally managed control-planes. It follows a slightly different process for provisioning clusters. For example, HyperShift uses cluster API as a backend and moves all the machine management bits to the management cluster.  

Why is this important?

showing machine management/cluster auto-scaling tabs in the console is likely to confuse users and cause unnecessary side effects. 

Definition of Done

• MachineConfig and MachineConfigPool should not be present, they should be either removed or hidden when the cluster is spawned using HyperShift. 
• Cluster Settings show say the control plane is externally managed and be read-only.
• Cluster Settings -> Configuration resources should be read-only, maybe hide the tab
• Some resources should go in an allowlist. Most will be hidden
• Review getting started steps

See Design Doc: https://docs.google.com/document/d/1k76JtRRHBdCCEjHPqKcYvbNVsuaGmRhWDLESWIm0mbo/edit#

Setup / Testing

It's based on the SERVER_FLAG controlPlaneTopology being set to External is really the driving factor here; this can be done in one of two ways:

• Locally via a Bridge Variable, export BRIDGE_CONTROL_PLANE_TOPOLOGY_MODE="External"
• Locally / OnCluster via modifying the window.SERVER_FLAGS.controlPlaneTopology to External in the dev tools

To test work related to cluster upgrade process, use a 4.10.3 cluster set on the candidate-4.10 upgrade channel using 4.11 frontend code.

Epic Goal

• Ensure that OCP Admin console can enable dark mode
• Mechanism for switching between light/dark mode, based on user preferences or User Settings in OCP
• Identify changes needed for OCP console's dynamic plugins
• Status as we work through the stories: https://docs.google.com/document/d/18ib0A9ZtSYo1e2aOtM2LtZcsNFs1aRCHXx6NAPsIAso/edit#

Why is this important?

• So the UX satisfies the current trands, where dark mode is becoming a standard for modern services.  

Acceptance Criteria

• OCP admin console must be rendered in a preferred mode based on `prefers-color-scheme` media query
• OCP admin console must be rendered in a preferred mode selected in the User Setting page
• Create an followup epic/story for and listing and tracking changes needed in OCP console's dynamic plugins

Dependencies (internal and external)

1. PatternFly - Dark mode PF variables

Previous Work (Optional):

1. Mike Coker has worked on a POC from the PF point of view on both the admin and dev console, and the screenshot results are listed below along with the repo branch. Also listed is a document covering some of the common issues found when putting together the admin console POC. https://github.com/mcoker/console/tree/dark-theme
   Background POC work completed for reference:

PatternFly Dark Theme Handbook: https://docs.google.com/document/d/1mRYEfUoOjTsSt7hiqjbeplqhfo3_rVDO0QqMj2p67pw/edit

Admin Console -> Workloads & Pods

• Screenshots: https://docs.google.com/presentation/d/1BoOpXpX96_uNUhVJiEqGUCZ-JMYh1A78fXJhk3H86K8/edit#slide=id.p
• Github branch: https://github.com/mcoker/console/tree/dark-theme
• Github PR for Dark Theme WIP by Vikram: https://github.com/openshift/console/pull/10947{}

Dev Console -> Gotcha pages: Observe Dashboard and Metrics, Add, Pipelines: builder, list, log, and run

• Screenshots: https://docs.google.com/presentation/d/13jagAf_JEu82hd_KpEHRmj25xCEqwImWpNufzVopuUs/edit#slide=id.p
• Github branch: https://github.com/openshift/console/pull/10815
• Evaluation: https://docs.google.com/spreadsheets/d/1fBCPPb4Z1sqUDKgQkpueGe8VQZo4pBUA9PV4vnFCnDw/edit#gid=0

Open questions::

1. Who should be responsible for updating DynamicPlugins to be able to render in dark mode?

An epic we can duplicate for each release to ensure we have a place to catch things we ought to be doing regularly but can tend to fall by the wayside.

This epic contains all the Dynamic Plugins related stories for OCP release-4.11 

Epic Goal

• Track all the stories under a single epic

Acceptance Criteria

Goal

• Add the ability for users to select supported but not recommended updates.
• Refine workflow when both "upgradeable=false" and "supported-but-not-recommended" updates occur

Background
RFE: for 4.10, Cincinnati and the cluster-version operator are adding conditional updates (a.k.a. targeted edge blocking): https://issues.redhat.com/browse/OTA-267

High-level plans in https://github.com/openshift/enhancements/blob/master/enhancements/update/targeted-update-edge-blocking.md#update-client-support-for-the-enhanced-schema

Example of what the oc adm upgrade UX will be in https://github.com/openshift/enhancements/blob/master/enhancements/update/targeted-update-edge-blocking.md#cluster-administrator.

The oc implementation landed via https://github.com/openshift/oc/pull/961.

Design

• Use case 01: "supported but not recommended" occurs to the latest version:
  • Add an info icon next to the version on update path with a pop-over to explain about why updating to this version is supported, but not recommended and a link to known risks
  • Identify the difference in "recommended" versions, "supported but not recommended" versions, and "blocked" versions (upgradeable=false) in the + more modal.
  • The latest version is pre-selected in the dropdown in the update modal with an inline alert to inform users about supported-but-not-recommended version with link to known risks. Users can choose to update to another recommended versions, update to a supported-but-not-recommended one, or wait.
  • The "recommended" and "supported but not recommended" updates are separated in the dropdown.
  • If a user selects a "recommended" update, the inline alert disappears.
• Use case 02: When both "upgradeable=false" and "supported but not recommended" occur:
  • Add an alert banner to explain why users shouldn’t update to the latest version and link to how to resolve on the cluster settings details page. Users have the options to resolve the issue, update to a patch version, or wait.
  • If users open the update modal without resolving the "upgradeable=false" issue, the next recommended version is pre-selected. An expandable link "View blocked versions (#)" is included under the dropdown to show "upgradeable=false" versions with resolve link.
  • If users resolve the "upgradeable=false" issue, the cluster settings page will change to use case 01

• • Question: Priority on changing the upgradeable=false alert banner in update modal and blocked versions in dropdown

See design doc: https://docs.google.com/document/d/1Nja4whdsI5dKmQNS_rXyN8IGtRXDJ8gXuU_eSxBLMIY/edit#

See marvel: https://marvelapp.com/prototype/h3ehaa4/screen/86077932

Epic Goal

• Add telemetry so that we know how image stream features are used.

Why is this important?

• We have a long standing epic to create image streams v2. We need to better understand how image streams are used today.

Scenarios

1. ...

Acceptance Criteria

• CI - MUST be running successfully with tests automated
• Release Technical Enablement - Provide necessary release enablement details and documents.
• ...

Dependencies (internal and external)

1. ...

Previous Work (Optional):

1. …

Open questions::

1. …

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

Epic Goal

• Make the image registry distributed across availability zones.

Why is this important?

• The registry should be highly available and zone failsafe.

Scenarios

1. As an administrator I want to rely on a default configuration that spreads image registry pods across topology zones so that I don't suffer from a long recovery time (>6 mins) in case of a complete zone failure if all pods are impacted.

Acceptance Criteria

• CI - MUST be running successfully with tests automated
• Release Technical Enablement - Provide necessary release enablement details and documents.

Dependencies (internal and external)

1. Pod's topologySpreadConstraints

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: https://github.com/openshift/cluster-image-registry-operator/pull/730
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

Goal

Remove Jenkins from the OCP Payload.

Problem

• Jenkins images are "non-trival in size, impact experience around OCP payloads
• Security advisories cannot be handled once, but against all actively supported OCP releases, adding to response time for handling said advisories
• Some customers may now want to upgrade Jenkins as OCP upgrades (making this configurable is more ideal)

Why is this important

• This is an engineering motivated item to reduce costs so we have more cycles for strategic work
• Aside from the team itself, top level OCP architects want this to reduce the image size, improve general OCP upgrade experience
• Sends a mix message with respect to what is startegic CI/CI when Jenkins is baked into OCP, but Tekton/Pipelines is an add-on, day 2 install sort of thing

Dependencies (internal and external)

See epic linking - need alternative non payload image available to provide relatively seamless migration

Also, the EP for this is approved and merged at https://github.com/openshift/enhancements/blob/master/enhancements/builds/remove-jenkins-payload.md

Estimate (xs, s, m, l, xl, xxl):

Questions:

• in addition to needing the CPaaS Image available first, have we confirmed the "deprecate first, then remove" requirements?  Per grooming we've assigned Rob Gormley the task https://issues.redhat.com/browse/JKNS-274 for tracking this down.  I will be reaching out to Ben Parees (he is currently on vacation) to confirm from an OCP staff engineer / architect perspective if his approval of https://github.com/openshift/enhancements/pull/841 is sufficient signoff from that end.

       PARTIAL ANSWER ^^:  confirmed with Ben Parees in https://coreos.slack.com/archives/C014MHHKUSF/p1646683621293839 that EP merging is currently sufficient OCP "technical leadership" approval.

Previous work

Customers

assuming none

Epic Goal

• Remove this UI from our stack that we cannot support.

Why is this important?

• Reduce support burden.
• Remove Bugzilla burden of addressing continuous CVEs found in this project.

Acceptance Criteria

• All Prometheus upstream UI links are removed
• Related documentation is updated
• Ports/routes etc configured to expose access to this UI are removed such that no configuration we provide enables access to this UI or its codepaths.
• There is no reason any CVEs found in this UI would ever require intervention by the Monitoring Team.

Dependencies (internal and external)

1. Make the Prometheus Targets information available in Console UI (https://issues.redhat.com/browse/MON-1079)

Previous Work (Optional):

1. …

Open questions::

1. …

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

Epic Goal

When users configure CMO to interact with systems outside of an OpenShift cluster, we want to provide an easy way to add the cluster ID to the data send.

Why is this important?

Technically this can be achieved today, by adding an identifying label to the remote_write configuration for a given cluster. The operator adding the remote_write integration needs to take care that the label is unique over the managed fleet of clusters. This however adds management complexity. Any given cluster already has a pseudo-unique datum, that can be used for this purpose.

• Starting in 4.9 we support the Prometheus remote_write feature to send metric data to a storage integration outside of the cluster similar to our own Telemetry service.
• In Telemetry we already use the cluster ID to distinguish the various clusters.
• For users of remote_write this could add an easy way to add such distinguishing information.

Scenarios

1. An organisation with multiple OpenShift clusters want to store their metric data centralized in a dedicated system and use remote_write in all their clusters to send this data. When querying their centralized storage, metadata (here a label) is needed to separate the data of the various clusters.
2. Service providers who manage multiple clusters for multiple customers via a centralized storage system need distinguishing metadata too. See https://issues.redhat.com/browse/OSD-6573 for example

Acceptance Criteria

• CI - MUST be running successfully with tests automated
• Release Technical Enablement - Provide necessary release enablement details and documents.
• Document how to use this feature

Dependencies (internal and external)

1. none

Previous Work (Optional):

1. none

Open questions::

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

Implementation proposal:

Expose a flag in the CMO configuration, that is false by default (keeps backward compatibility) and when set to true will add the _id label to a remote_write configuration. More specifically it will be added to the top of a remote_write relabel_config list via the replace action. This will add the label as expect, but additionally a user could alter this label in a later relabel config to suit any specific requirements (say rename the label or add additional information to the value).
The location of this flag is the remote_write Spec, so this can be set for individual remote_write configurations.

Epic Goal

• Offer the option to double the scrape intervals for CMO controlled ServiceMonitors in single node deployments
• Alternatively automatically double the same scrape intervals if CMO detects an SNO setup

The potential target ServiceMonitors are:

• kubelet
• kube-state-metrics
• node-exporter
• etcd
• openshift-state-metrics

Why is this important?

• Reduce CPU usage in SNO setups
• Specifically doubling the scrape interval is important because:

1. we are confident that this will have the least chance to interfere with existing rules. We typically have rate queries over the last 2 minutes (no shorter time window). With 30 second scrape intervals (the current default) this gives us 4 samples in any 2 minute window. rate needs at least 2 samples to work, we want another 2 for failure tolerance. Doubling the scrape interval will still give us 2 samples in most 2 minute windows. If a scrape fails, a few rule evaluations might fail intermittently.
2. We expect a measureable reduction of CPU resources (see previous work)

Scenarios

1. RAN deployments (Telco Edge) are SNO deployments. In these setups a full CMO deployment is often not needed and the default setup consumes too many resources. OpenShift as a whole has only very limited CPU cycles available and too many cycles are spend on Monitoring

Acceptance Criteria

• CI - MUST be running successfully with tests automated
• Release Technical Enablement - Provide necessary release enablement details and documents.
• ...

Previous Work (Optional):

1. https://issues.redhat.com/browse/MON-1569

Open questions:

1. Whether doubling some scrape intervals reduces CPU usage to fit into the assigned budget

Non goals

• Allow arbitrarily long scrape intervals. This will interfere with alert and recoring rules
• Implement a global override to scrape intervals.

Problem:

This epic is mainly focused on the 4.10 Release QE activities

Goal:

1. Identify the scenarios for automation
2. Segregate the test Scenarios into smoke, Regression and other user stories
a. Update the https://docs.jboss.org/display/ODC/Automation+Status+Report
3. Align with layered operator teams for updating scripts
3. Work closely with dev team for epic automation
4. Create the automation scripts using cypress
5. Implement CI for nightly builds
6. Execute scripts on sprint basis

Why is it important?

To the track the QE progress at one place in 4.10 Release Confluence page

Use cases:

1. <case>

Acceptance criteria:

1. <criteria>

Dependencies (External/Internal):

Design Artifacts:

Exploration:

Note:

Goal:

This epic covers a number of customer requests(RFEs) as well as increases usability.

Why is it important?

Customer satisfaction as well as improved usability.

Acceptance Criteria

1. Allow user to re-arrange the resources which have ben added to nav by the user
2. Improved user experience (form based experience)
   1. Form based editing of Routes
   2. Form based creation and editing of Config Maps
   3. Form base creation of Deployments
3. Improved discovery
   1. Include Share my project on the Add page to increase discoverability
   2. NS Helm Chart Repo
      1. Add tile to Add page for discoverability
      2. Provide a form driven creation experience
      3. User should be able to switch back and forth from Form/YAML
      4. change the intro text to the below & have the link in the intro text bring up the full page form
         1. Browse for charts that help manage complex installations and upgrades. Cluster administrators can customize the content made available in the catalog. Alternatively, developers can try to configure their own custom Helm Chart repository.

Dependencies (External/Internal):

None

Exploration:

Miro board from Epic Exploration

Problem:

Currently we are only able to get limited telemetry from the Dev Sandbox, but not from any of our managed clusters or on prem clusters.

Goals:

1. Enable gathering segment telemetry whenever cluster telemetry is enabled on OSD clusters
2. Have our OSD clusters opt into telemetry by default
3. Work with PM & UX to identify additional metrics to capture in addition to what we have enabled currently on Sandbox.
4. Ability to get a single report from woopra across all of our Sandbox and OSD clusters.
5. Be able to generate a report including metrics of a single cluster or all clusters of a certain type ( sandbox, or OSD)

Why is it important?

In order to improve properly analyze usage and the user experience, we need to be able to gather as much data as possible.

Goal:
Enhance oc adm release new (and related verbs info, extract, mirror) with heterogeneous architecture support

Epic Goal

• Update image registry dependencies (Kubernetes and OpenShift) to the latest versions.

Why is this important?

• New versions usually bring improvements that are needed by the registry and help with getting updates for z-stream.

Scenarios

1. As an OpenShift engineer, I want my components to use the versions of dependencies, so that they get fixes for known issues and can be easily updated in z-stream.

Acceptance Criteria

• CI - MUST be running successfully with tests automated

Dependencies (internal and external)

1. Kubernetes 1.24

Previous Work (Optional):

1. IR-210

Done Checklist

• CI - CI is running, tests are automated and merged.
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• QE - Test plans in Polarion: <link or reference to Polarion>

Epic Goal

• Provide a dedicated dashboard for NVIDIA GPU usage visualization in the OpenShift Console.

Why is this important?

• Customers that use GPUs in their clusters usually have the GPU workloads as the main purpose of their cluster. As such, it makes much more sense to have the details about the usage they are doing of GPGPU resources AND CPU/RAM rather than just CPU/RAM

Scenarios

1. As an admin of a cluster dedicated to data science, I want to quickly find out how much of my very costly resources are currently in use and if things are getting queued due to lack of resources

Acceptance Criteria

• CI - MUST be running successfully with tests automated
• Release Technical Enablement - Provide necessary release enablement details and documents.

Dependencies (internal and external)

1. The NVIDIA GPU Operator must export to prometheus the relevant data

Open questions::

1. Will NVIDIA agree to these extra data exports in their GPU Operator?

I asked Zvonko Kaiser and he seemed open to it. I need to confirm with Shiva Merla

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

OCP/Telco Definition of Done
Epic Template descriptions and documentation.

<--- Cut-n-Paste the entire contents of this description into your new Epic --->

Epic Goal

• Run OpenShift builds that do not execute as the "root" user on the host node.

Why is this important?

• OpenShift builds require an elevated set of capabilities to build a container image
• Builds currently run as root to maintain adequate performance
• Container workloads should run as non-root from the host's perspective. Containers running as root are a known security risk.
• Builds currently run as root and require a privileged container. See BUILD-225 for removing the privileged container requirement.

Scenarios

1. Run BuildConfigs in a multi-tenant environment
2. Run BuildConfigs in a heightened security environment/deployment

Acceptance Criteria

• Developers can opt into running builds in a cri-o user namespace by providing an environment variable with a specific value.
• When the correct environment variable is provided, builds run in a cri-o user namespace, and the build pod does not require the "privileged: true" security context.
• User namespace builds can pass basic test scenarios for the Docker and Source strategy build.
• Steps to run unprivileged builds are documented.

Dependencies (internal and external)

1. Buildah supports running inside a non-privileged container
2. CRI-O allows workloads to opt into running containers in user namespaces.

Previous Work (Optional):

1. BUILD-225 - remove privileged requirement for builds.

Open questions::

1. …

Done Checklist

• CI - CI is running, tests are automated and merged.
• Release Enablement <link to Feature Enablement Presentation>
• DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
• DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
• DEV - Downstream build attached to advisory: <link to errata>
• QE - Test plans in Polarion: <link or reference to Polarion>
• QE - Automated tests merged: <link or reference to automated tests>
• DOC - Downstream documentation merged: <link to meaningful PR>

• https://github.com/openshift/machine-config-operator/pull/3418

Description of problem:

If you set a services cluster IP to an IP with a leading zero (e.g. 192.168.0.011), ovn-k should normalise this and remove the leading zero before sending it to ovn.

This was seen by me on a CI run executing the k8 test here: test/e2e/network/funny_ips.go +75

you can reproduce using that above test.

Have a read of the text there:

 43 // What are funny IPs:  
 44 // The adjective is because of the curl blog that explains the history and the problem of liberal  
 45 // parsing of IP addresses and the consequences and security risks caused the lack of normalization,
 46 // mainly due to the use of different notations to abuse parsers misalignment to bypass filters.
 47 // xref: https://daniel.haxx.se/blog/2021/04/19/curl-those-funny-ipv4-addresses/   
 48 //     
 49 // Since golang 1.17, IPv4 addresses with leading zeros are rejected by the standard library.
 50 // xref: https://github.com/golang/go/issues/30999
 51 //     
 52 // Because this change on the parsers can cause that previous valid data become invalid, Kubernetes
 53 // forked the old parsers allowing leading zeros on IPv4 address to not break the compatibility.
 54 //     
 55 // Kubernetes interprets leading zeros on IPv4 addresses as decimal, users must not rely on parser
 56 // alignment to not being impacted by the associated security advisory: CVE-2021-29923 golang
 57 // standard library "net" - Improper Input Validation of octal literals in golang 1.16.2 and below
 58 // standard library "net" results in indeterminate SSRF & RFI vulnerabilities. xref:
 59 // https://nvd.nist.gov/vuln/detail/CVE-2021-29923                                                                                                     

northd is logging an error about this also:

|socket_util|ERR|172.30.0.011:7180: bad IP address "172.30.0.011" 
...
2022-08-23T14:14:21.968Z|01839|ovn_util|WARN|bad ip address or port for load balancer key 172.30.0.011:7180

Also, I see the error:

E0823 14:14:34.135115    3284 gateway_shared_intf.go:600] Failed to delete conntrack entry for service e2e-funny-ips-8626/funny-ip: failed to delete conntrack entry for service e2e-funny-ips-8626/funny-ip with svcVIP 172.30.0.011, svcPort 7180, protocol TCP: value "<nil>" passed to DeleteConntrack is not an IP address 

We should normalise the IPs before sending to OVN-k. I see also theres conntrack error when trying to set this bad IP.

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:
1. See above k8 test

Actual results:

Leading zero IP sent to OVN

Expected results:

No leading zero IP sent to OVN

Additional info:

• https://github.com/openshift/ovn-kubernetes/pull/1393

Description of problem:

When creating a ProjectHelmChartRepository (with or without the form) and setting a display name (as `spec.name`), this value is not used in the developer catalog / Helm Charts catalog filter sidebar.

It shows (and watches) the display names of `HelmChartRepository` resources.

Version-Release number of selected component (if applicable):

4.11

How reproducible:

Always

Steps to Reproduce:

1. Switch to Developer Perspective
2. Navigate to Add > "Helm Chart repositories"
3. Enter "ibm-charts" as "Chart repository name"
4. Enter URL https://raw.githubusercontent.com/IBM/charts/master/repo/community/index.yaml as URL)
5. Press on create
6. Open the YAML editor and change the `spec.name` attribute to "IBM Charts"
7. Save the change
8. Navigate to Add > "Helm Chart" 

Actual results:

The filter navigation on the left side shows "Chart Repositories" "Ibm Chart". A camel case version of the resource name.

Expected results:

It should show the "spec.name" "IBM Charts" if defined and fallback to the current implementation if the optional spec.name is not defined.

Additional info:

There is a bug discussing that the display name could not be entered directly, https://bugzilla.redhat.com/show_bug.cgi?id=2106366. This bug here is only about the catalog output.

• https://github.com/openshift/console/pull/12130

• https://github.com/openshift/cluster-kube-apiserver-operator/pull/1386

Description of problem:

The 4.11 version of openshift-installer does not support the mon01 zone

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:

1.
2.
3.

Actual results:

Expected results:

Additional info:

• https://github.com/openshift/installer/pull/6341

Description of problem:

The last egressIP in IP capacity cannot be applied correctly

Version-Release number of selected component (if applicable):

4.11.0-0.nightly-2022-11-27-164248 

How reproducible:

Found this failure in automation case which used to pass

Steps to Reproduce:

In AWS, one worker node is with IP capacity "ipv4:14"
 $oc describe node ip-10-0-129-21.us-west-2.compute.internal | egrep -C 3 egress
Annotations:        cloud.network.openshift.io/egress-ipconfig:
                      [{"interface":"eni-03820ba0eca427fbf","ifaddr":{"ipv4":"10.0.128.0/18"},"capacity":{"ipv4":14,"ipv6":15}}]
                    csi.volume.kubernetes.io/nodeid: {"ebs.csi.aws.com":"i-0cb3ae15bf3cffd9f"}
                    k8s.ovn.org/host-addresses: ["10.0.129.21"]

1. Label above node as egress node
2. Created 15 egressIP objects, each egressIP object with one egressIP.

Actual results:

 13 egressIPs applied correctly , last one is in wrong status.
% oc get egressip
NAME                EGRESSIPS      ASSIGNED NODE                               ASSIGNED EGRESSIPS
egressip-47208-0    10.0.135.200   ip-10-0-129-21.us-west-2.compute.internal   10.0.135.200
egressip-47208-1    10.0.162.178   ip-10-0-129-21.us-west-2.compute.internal   10.0.162.178
egressip-47208-10   10.0.144.46    ip-10-0-129-21.us-west-2.compute.internal   10.0.144.46
egressip-47208-11   10.0.191.91    ip-10-0-129-21.us-west-2.compute.internal   10.0.191.91
egressip-47208-12   10.0.133.215   ip-10-0-129-21.us-west-2.compute.internal   10.0.133.215
egressip-47208-13   10.0.174.207   ip-10-0-129-21.us-west-2.compute.internal   10.0.174.207
egressip-47208-14   10.0.176.224   ip-10-0-129-21.us-west-2.compute.internal   10.0.176.224
egressip-47208-2    10.0.184.114   ip-10-0-129-21.us-west-2.compute.internal   10.0.184.114
egressip-47208-3    10.0.167.224   ip-10-0-129-21.us-west-2.compute.internal   10.0.167.224
egressip-47208-4    10.0.187.148   ip-10-0-129-21.us-west-2.compute.internal   10.0.187.148
egressip-47208-5    10.0.184.109   ip-10-0-129-21.us-west-2.compute.internal   10.0.184.109
egressip-47208-6    10.0.155.208                                               
egressip-47208-7    10.0.134.13    ip-10-0-129-21.us-west-2.compute.internal   10.0.134.13
egressip-47208-8    10.0.142.255   ip-10-0-129-21.us-west-2.compute.internal   10.0.142.255
egressip-47208-9    10.0.170.197

% oc get cloudprivateipconfig
NAME           AGE
10.0.133.215   113s
10.0.134.13    113s
10.0.135.200   113s
10.0.142.255   113s
10.0.144.46    113s
10.0.155.208   113s
10.0.162.178   113s
10.0.167.224   113s
10.0.174.207   113s
10.0.176.224   113s
10.0.184.109   113s
10.0.184.114   113s
10.0.187.148   113s
10.0.191.91    113s

 oc get cloudprivateipconfig 10.0.155.208  -o yaml
apiVersion: cloud.network.openshift.io/v1
kind: CloudPrivateIPConfig
metadata:
  annotations:
    k8s.ovn.org/egressip-owner-ref: egressip-47208-6
  creationTimestamp: "2022-11-28T09:13:47Z"
  finalizers:
  - cloudprivateipconfig.cloud.network.openshift.io/finalizer
  generation: 1
  name: 10.0.155.208
  resourceVersion: "72869"
  uid: 0143a07b-0a30-4de8-bfd7-589ed0c3d7dc
spec:
  node: ip-10-0-129-21.us-west-2.compute.internal
status:
  conditions:
  - lastTransitionTime: "2022-11-28T09:16:51Z"
    message: 'Error processing cloud assignment request, err: <nil>'
    observedGeneration: 1
    reason: CloudResponseError
    status: "False"
    type: Assigned
  node: ip-10-0-129-21.us-west-2.compute.internal

Expected results:

As IP capacity for this node is 14, so here should have 14 egress IP applied successfully. No cloudprivateipconfig IP in error status.

Additional info:

• https://github.com/openshift/cloud-network-config-controller/pull/83

See these threads https://coreos.slack.com/archives/G01F05P2PTL/p1645982017061749?thread_ts=1645970469.871559&cid=G01F05P2PTL for more information

• https://github.com/openshift/origin/pull/26904
• https://github.com/openshift/origin/pull/26868

• https://github.com/openshift/cloud-network-config-controller/pull/78

This is a clone of issue OCPBUGS-3021. The following is the description of the original issue:
—
Description of problem:

me-west1 is not listed in the survey

Steps to Reproduce:

1. run survey (openshift-install create install-config without an install config file)
2. go through prompts until regions
3.

Actual results:

me-west1 region is missing

Expected results:

me-west1 region is listed (and install succeeds in the region)

• https://github.com/openshift/installer/pull/6690

This is a clone of issue OCPBUGS-2181. The following is the description of the original issue:
—
Description of problem:

E2E test Installs Red Hat Integration - 3scale operator test is failing due to change of Operator name

CI Search: https://search.ci.openshift.org/?search=Installs+Red+Hat+Integration+-+3scale+operator+in+test+namespace+and+creates+3scale+Backend+Schema+operand+instance&maxAge=24h&context=1&type=bug%2Bissue%2Bjunit&name=pull-ci-openshift-console-master-e2e-gcp-console&excludeName=&maxMatches=5&maxBytes=20971520&groupBy=job

• https://github.com/openshift/console/pull/12175

The kube-state-metric pod inside the openshift-monitoring namespace is not running as expected.

On checking the logs I am able to see that there is a memory panic

~~~
2022-11-22T09:57:17.901790234Z I1122 09:57:17.901768 1 main.go:199] Starting kube-state-metrics self metrics server: 127.0.0.1:8082
2022-11-22T09:57:17.901975837Z I1122 09:57:17.901951 1 main.go:66] levelinfomsgTLS is disabled.http2false
2022-11-22T09:57:17.902389844Z I1122 09:57:17.902291 1 main.go:210] Starting metrics server: 127.0.0.1:8081
2022-11-22T09:57:17.903191857Z I1122 09:57:17.903133 1 main.go:66] levelinfomsgTLS is disabled.http2false
2022-11-22T09:57:17.906272505Z I1122 09:57:17.906224 1 builder.go:191] Active resources: certificatesigningrequests,configmaps,cronjobs,daemonsets,deployments,endpoints,horizontalpodautoscalers,ingresses,jobs,leases,limitranges,mutatingwebhookconfigurations,namespaces,networkpolicies,nodes,persistentvolumeclaims,persistentvolumes,poddisruptionbudgets,pods,replicasets,replicationcontrollers,resourcequotas,secrets,services,statefulsets,storageclasses,validatingwebhookconfigurations,volumeattachments
2022-11-22T09:57:17.917758187Z E1122 09:57:17.917560 1 runtime.go:78] Observed a panic: "invalid memory address or nil pointer dereference" (runtime error: invalid memory address or nil pointer dereference)
2022-11-22T09:57:17.917758187Z goroutine 24 [running]:
2022-11-22T09:57:17.917758187Z k8s.io/apimachinery/pkg/util/runtime.logPanic(

)
2022-11-22T09:57:17.917758187Z /usr/lib/golang/src/runtime/panic.go:1038 +0x215
2022-11-22T09:57:17.917758187Z k8s.io/kube-state-metrics/v2/internal/store.ingressMetricFamilies.func6(0x40)
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/internal/store/ingress.go:136 +0x189
2022-11-22T09:57:17.917758187Z k8s.io/kube-state-metrics/v2/internal/store.wrapIngressFunc.func1(

)
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/pkg/metric_generator/generator.go:107 +0xd8
~~~

Logs are attached to the support case

• https://github.com/openshift/kube-state-metrics/pull/85

Description of problem:

Whenever one runs ovnkube-trace from an in-cluster pod to a pod in the host network that is in different node, the following spurious error appears despite of the underlying ovn-trace being correct:

ovn-trace indicates failure from ingress-canary-7zhxs to router-default-6758fb465c-s66rv - output to "k8s-worker-0.example.redhat.com" not matched

This is caused because as per[1], if the destination pod is in host network, the outport is expected to be of the form "k8s-${NODE_NAME}", which is true only if either in local gateway or if the source pod is in the same node than the destination pod.

This is already fixed in the master branch[2], but we would need this to be backported to previous releases. 

Version-Release number of selected component (if applicable):

4.11.4

How reproducible:

Always

Steps to Reproduce:

1. ovnkube-trace from pod in the SDN to pod in host network
2.
3.

Actual results:

Wrong error

Expected results:

No wrong error

Additional info:

References:
[1] - https://github.com/openshift/ovn-kubernetes/blob/release-4.11/go-controller/cmd/ovnkube-trace/ovnkube-trace.go#L771-L777
[2] - https://github.com/openshift/ovn-kubernetes/blob/master/go-controller/cmd/ovnkube-trace/ovnkube-trace.go#L755-L769

• https://github.com/openshift/ovn-kubernetes/pull/1436

Description of problem:

We observed that a dual stack cluster deployed with AI gui only fails.
This cluster is dhcp for ipv4, RA/RS autoconfiguration for ipv6.

It fails with error in the onvkube container

```
I0906 07:45:43.044090   87450 gateway_init.go:261] Initializing Gateway Functionality
I0906 07:45:43.046398   87450 gateway_localnet.go:152] Node local addresses initialized to: map[10.131.31.214:{10.131.31.208 fffffff0} 10.255.0.2:{10.255.0.0 fffffe00} 127.0.0.1:{127.0.0.0 ff000000} 2001:1b74:480:613a:f6e9:d4ff:fef1:6f26:{2001:1b74:480:613a:: ffffffffffffffff0000000000000000} ::1:{::1 ffffffffffffffffffffffffffffffff} fd01:0:0:1::2:{fd01:0:0:1:: ffffffffffffffff0000000000000000} fe80::8ce9:b4ff:fe1a:1208:{fe80:: ffffffffffffffff0000000000000000} fe80::c8ef:ecff:fee3:64c7:{fe80:: ffffffffffffffff0000000000000000} fe80::f6e9:d4ff:fef1:6f26:{fe80:: ffffffffffffffff0000000000000000}]
I0906 07:45:43.047759   87450 helper_linux.go:71] Provided gateway interface "br-ex", found as index: 7
I0906 07:45:43.048045   87450 helper_linux.go:97] Found default gateway interface br-ex 10.131.31.209
I0906 07:45:43.048152   87450 helper_linux.go:71] Provided gateway interface "br-ex", found as index: 7
F0906 07:45:43.048318   87450 ovnkube.go:133] failed to get default gateway interface
```

on the node we observed that there is multi-path entry during

```
default proto ra metric 48 pref medium
        nexthop via fe80::e2f6:2d01:ab14:ec71 dev br-ex weight 1
        nexthop via fe80::e2f6:2d01:ab11:c271 dev br-ex weight 1
```

I manually remove one of the entries (`ip route delete`) and then delete the ovnkube-node pod. Then the installation continues, container works.

Every time there is multiple entry, if the onvkube-node starts, it fails.

Version-Release number of selected component (if applicable):

4.10.30

How reproducible:

Steps to Reproduce:

1.
2.
3.

Actual results:

Expected results:

Additional info:

There might a side issue: the interface of the node upon boot takes time to get the ipv6 autoconfiguration, no RS packets seemed to be sent out (observed zero on all routers).

• https://github.com/openshift/ovn-kubernetes/pull/1296

• https://github.com/openshift/console/pull/12182

Our Prometheus alerts are inconsistent with both upstream and sometimes our own vendor folder. Let's do a clean update run before the next release is branched off.

• https://github.com/openshift/cluster-etcd-operator/pull/957

This is a clone of issue OCPBUGS-4499. The following is the description of the original issue:
—
This is a clone of issue OCPBUGS-860. The following is the description of the original issue:
—
Description of problem:

In GCP, once an external IP address is assigned to master/infra node through GCP console, numbers of pending CSR from kubernetes.io/kubelet-serving is increasing, and the following error are reported:

I0902 10:48:29.254427       1 controller.go:121] Reconciling CSR: csr-q7bwd
I0902 10:48:29.365774       1 csr_check.go:157] csr-q7bwd: CSR does not appear to be client csr
I0902 10:48:29.371827       1 csr_check.go:545] retrieving serving cert from build04-c92hb-master-1.c.openshift-ci-build-farm.internal (10.0.0.5:10250)
I0902 10:48:29.375052       1 csr_check.go:188] Found existing serving cert for build04-c92hb-master-1.c.openshift-ci-build-farm.internal
I0902 10:48:29.375152       1 csr_check.go:192] Could not use current serving cert for renewal: CSR Subject Alternate Name values do not match current certificate
I0902 10:48:29.375166       1 csr_check.go:193] Current SAN Values: [build04-c92hb-master-1.c.openshift-ci-build-farm.internal 10.0.0.5], CSR SAN Values: [build04-c92hb-master-1.c.openshift-ci-build-farm.internal 10.0.0.5 35.211.234.95]
I0902 10:48:29.375175       1 csr_check.go:202] Falling back to machine-api authorization for build04-c92hb-master-1.c.openshift-ci-build-farm.internal
E0902 10:48:29.375184       1 csr_check.go:420] csr-q7bwd: IP address '35.211.234.95' not in machine addresses: 10.0.0.5
I0902 10:48:29.375193       1 csr_check.go:205] Could not use Machine for serving cert authorization: IP address '35.211.234.95' not in machine addresses: 10.0.0.5
I0902 10:48:29.379457       1 csr_check.go:218] Falling back to serving cert renewal with Egress IP checks
I0902 10:48:29.382668       1 csr_check.go:221] Could not use current serving cert and egress IPs for renewal: CSR Subject Alternate Names includes unknown IP addresses
I0902 10:48:29.382702       1 controller.go:233] csr-q7bwd: CSR not authorized

Version-Release number of selected component (if applicable):

4.11.2

Steps to Reproduce:

1. Assign external IPs to master/infra node in GCP
2. oc get csr | grep kubernetes.io/kubelet-serving

Actual results:

CSRs are not approved

Expected results:

CSRs are approved

Additional info:

This issue is only happen in GCP. Same OpenShift installations in AWS do not have this issue.

It looks like the CSR are created using external IP addresses once assigned.

Ref: https://coreos.slack.com/archives/C03KEQZC1L2/p1662122007083059

• https://github.com/openshift/machine-api-provider-gcp/pull/27

• https://github.com/openshift/aws-ebs-csi-driver/pull/209

In order to delete the correct GCP cloud resources, the "--credentials-requests-dir" parameter must be passed to "ccoctl gcp delete". This was fixed for 4.12 as part of https://github.com/openshift/cloud-credential-operator/pull/489 but must be backported for previous releases. See https://github.com/openshift/cloud-credential-operator/pull/489#issuecomment-1248733205 for discussion regarding this bug.

To reproduce, create GCP infrastructure with a name parameter that is a subset of another set of GCP infrastructure's name parameter. I will "ccoctl gcp create all" with "name=abutcher-gcp" and "name=abutcher-gcp1".

$ ./ccoctl gcp create-all \
--name=abutcher-gcp \
--region=us-central1 \
--project=openshift-hive-dev \
--credentials-requests-dir=./credrequests

$ ./ccoctl gcp create-all \
--name=abutcher-gcp1 \
--region=us-central1 \
--project=openshift-hive-dev \
--credentials-requests-dir=./credrequests

Running "ccoctl gcp delete --name=abutcher-gcp" will result in GCP infrastructure for both "abutcher-gcp" and "abutcher-gcp1" being deleted. 

$ ./ccoctl gcp delete --name abutcher-gcp --project openshift-hive-dev
2022/10/24 11:30:06 Credentials loaded from file "/home/abutcher/.gcp/osServiceAccount.json"
2022/10/24 11:30:06 Deleted object .well-known/openid-configuration from bucket abutcher-gcp-oidc
2022/10/24 11:30:07 Deleted object keys.json from bucket abutcher-gcp-oidc
2022/10/24 11:30:07 OIDC bucket abutcher-gcp-oidc deleted
2022/10/24 11:30:09 IAM Service account abutcher-gcp-openshift-image-registry-gcs deleted
2022/10/24 11:30:10 IAM Service account abutcher-gcp-openshift-gcp-ccm deleted
2022/10/24 11:30:11 IAM Service account abutcher-gcp1-openshift-cloud-network-config-controller-gcp deleted
2022/10/24 11:30:12 IAM Service account abutcher-gcp-openshift-machine-api-gcp deleted
2022/10/24 11:30:13 IAM Service account abutcher-gcp-openshift-ingress-gcp deleted
2022/10/24 11:30:15 IAM Service account abutcher-gcp-openshift-gcp-pd-csi-driver-operator deleted
2022/10/24 11:30:16 IAM Service account abutcher-gcp1-openshift-ingress-gcp deleted
2022/10/24 11:30:17 IAM Service account abutcher-gcp1-openshift-image-registry-gcs deleted
2022/10/24 11:30:19 IAM Service account abutcher-gcp-cloud-credential-operator-gcp-ro-creds deleted
2022/10/24 11:30:20 IAM Service account abutcher-gcp1-openshift-gcp-pd-csi-driver-operator deleted
2022/10/24 11:30:21 IAM Service account abutcher-gcp1-openshift-gcp-ccm deleted
2022/10/24 11:30:22 IAM Service account abutcher-gcp1-cloud-credential-operator-gcp-ro-creds deleted
2022/10/24 11:30:24 IAM Service account abutcher-gcp1-openshift-machine-api-gcp deleted
2022/10/24 11:30:25 IAM Service account abutcher-gcp-openshift-cloud-network-config-controller-gcp deleted
2022/10/24 11:30:25 Workload identity pool abutcher-gcp deleted

• https://github.com/openshift/cloud-credential-operator/pull/506

Description of problem:

The alertmanager pod is stuck on OCP 4.11 with OVN in container Creating State

From oc describe alertmanager pod:
...
Events:
  Type     Reason                  Age                  From     Message
  ----     ------                  ----                 ----     -------
  Warning  FailedCreatePodSandBox  16s (x459 over 17h)  kubelet  (combined from similar events): Failed to create pod sandbox: rpc error: code = Unknown desc = failed to create pod network sandbox k8s_alertmanager-managed-ocs-alertmanager-0_openshift-storage_3a55ed54-4eaa-4f65-8a10-e5d21fad1ebc_0(88575547dc0b210307b89dd2bb8e379ece0962b607ac2707a1c2cf630b1aaa78): error adding pod openshift-storage_alertmanager-managed-ocs-alertmanager-0 to CNI network "multus-cni-network": plugin type="multus" name="multus-cni-network" failed (add): [openshift-storage/alertmanager-managed-ocs-alertmanager-0/3a55ed54-4eaa-4f65-8a10-e5d21fad1ebc:ovn-kubernetes]: error adding container to network "ovn-kubernetes": CNI request failed with status 400: '[openshift-storage/alertmanager-managed-ocs-alertmanager-0 88575547dc0b210307b89dd2bb8e379ece0962b607ac2707a1c2cf630b1aaa78] [openshift

Version-Release number of selected component (if applicable):

OCP 4.11 with OVN

How reproducible:

100%

Steps to Reproduce:

1. Terminate the node on which alertmanager pod is running
2. pod will get stuck in container Creating state
3.

Actual results:

AlertManager pod is stuck in container Creating state

Expected results:

Alertmanager pod is ready

Additional info:

The workaround would be to terminate the alertmanager pod

• https://github.com/openshift/ovn-kubernetes/pull/1422

Description of problem:

This bugs purpose is to enable a feature backport of https://issues.redhat.com/browse/MON-1949.

• https://github.com/openshift/cluster-monitoring-operator/pull/1774

Description of problem:

Users search a resource (for example, Pod) with Name filter applied and input a text to the filter field then the search results filtered accordingly. 

Once the results are shown, when the user clear the value in one-shot (i.e. select whole filter text from the field and clear it using delete or backspace key) from the field, 

then the search result doesn't clear accordingly and the previous result stays on the page.

Version-Release number of selected components (if applicable):

4.11.0-0.nightly-2022-08-16-194731 & works fine with OCP 4.12 latest version.

How reproducible:

 Always

Steps to Reproduce:

1. Login to OCP web console.
2. Go to the Search section.
3. Select the resource filter and choose a resource (for example , Pod)
4. Change the filter option to "Name" and input a text( for example, installer) to the filter field.
5. Once the results are shown, select the whole filter text ( i.e. installer).
6. Clear the text using the Delete or Backspace key.
7. View the behavior on search results

Actual results:

Search result doesn't clear when user clears name filter in one-shot for any resources.

Expected results:

Search results should clear when the user clears name filters in one-shot for any resources.

Additional info:

Reproduced in both chrome[103.0.5060.114 (Official Build) (64-bit)] and firefox[91.11.0esr (64-bit)] browsers.

Attached screen share for the same issue. SearchIssues.mp4

• https://github.com/openshift/console/pull/11975

This is a clone of issue OCPBUGS-1678. The following is the description of the original issue:
—
Description of problem:
pkg/devfile/sample_test.go fails after devfile registry was updated (https://github.com/devfile/registry/pull/126)

OCPBUGS-1677 is about updating our assertion so that the CI job runs successfully again. We might want to backport this as well.

This is about updating the code that the test should use a mock response instead of the latest registry content OR check some specific attributes instead of comparing the full JSON response.

Version-Release number of selected component (if applicable):
4.12

How reproducible:
Always

Steps to Reproduce:
1. Clone openshift/console
2. Run ./test-backend.sh

Actual results:
Unit tests fail

Expected results:
Unit tests should pass again

Additional info:

• https://github.com/openshift/console/pull/12137

Following the trail
https://github.com/kubernetes-sigs/aws-ebs-csi-driver/issues/1139
https://github.com/kubernetes-sigs/aws-ebs-csi-driver/pull/1175
https://github.com/openshift/aws-ebs-csi-driver/pull/206
 
Looks like the fix should be in 4.12, but it still see it being 39 vs ~24 on an m6i instance type.

It seems that the kubelet applies this capacity to the node in 4.11 and earlier and, thus, unlikely to receive this fix for attachable volumes in the upstream CSI driver. 4.12 behavior is currently unknown but it seems that the kubelet might still be setting this capacity.

The actual issue is that kube scheduler schedules pods that require PVs to nodes where those PVs can not be attached.

• https://github.com/openshift/aws-ebs-csi-driver/pull/213

This is a clone of OCPBUGSM-47085
Version:

$ openshift-install version
4.11.0-rc2

Platform:

Nutanix

On `openshift-installer create manifests` stage a connection to Prism is made (see https://github.com/openshift/installer/blob/master/pkg/asset/installconfig/nutanix/validation.go#L15-L36=)

This make generating manifests separately impossible, which breaks Assisted Installer flow. Instead of storing sensitive user information, Assisted Installer sets fake details in install-config.yaml and asks user to update these after installation has completed.

With validation happening on `openshift-install create manifests` phase installation process can't start with invalid credentials.

Please move this validation to ValidateForProvisioning, similar to vSphere

• https://github.com/openshift/installer/pull/6251

We are in the process of moving our bug tracking to JIRA. We should update the report bug link in the help menu to use JIRA instead of Bugzilla for new bugs. Opening as a medium severity bug since this only impacts prerelease OpenShift versions. For release versions, we have users open customer cases.

• https://github.com/openshift/console/pull/11965

#Description of problem:

Developer Console > +ADD > Develoeper Catalog > Service > select Types Templates > Initiate Template

Input values in Instantiate Template are disappeared randomly.

#Version-Release number of selected component (if applicable):

• Customer ENV

• OCP4.10.9
• Developer Console
• Edge 88x. / Edge 85.0.x / Chrome 97.x /Chrome 88.x
• Internet Disconnected OCP cluster

• quicklab test ENV

• Developer Console
• OCP4.10.12 
• Chrome 100

#How reproducible:

I reproduced this issue in ocp410ovn shared cluster in the quicklab

• https://console-openshift-console.apps.sharedocp4upi410ovn.lab.upshift.rdu2.redhat.com

Select Apache HTTP Server > Input name "test" in Application Hostname box
After several seconds, the value has disappeared in the web console.

#Steps to Reproduce:

0. Developer Console > +ADD > Develoeper Catalog > Service > select Types Templates > Initiate Template

1. Input values in the box of template menu.

2. The values are disappeared after several seconds later. (20s~ or randomly)

3. Many users have experienced this issue.

• The web browser version of users experiencing this issue.

• Customer: Edge 88x. / Edge 85.0.x / Chrome 97.x /Chrome 88.x
• My browser: Chrome 102.x

==> the browser version doesn't matter.

#Actual results:

Input values in "Instantiate Template" are disappeared randomly.
Users can't use the Initiate Template feature in the Dev console.

#Expected results:
Input values remain in the web console and users creat the object by the "Instantiate Template"

#Additional info:

See "Application Name" has disappeared in the video I attached.

• https://github.com/openshift/console/pull/11982

Description of problem:

When queried dns hostname from certain pod on the certain node, responded from random coredns pod, not prefer local one. Is it expected result ?

# In OCP v4.8.13 case
// Ran dig command on the certain node which is running the following test-7cc4488d48-tqc4m pod.
sh-4.4# while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done
:
07:16:33 :172.217.175.238
07:16:34 :172.217.175.238 <--- Refreshed the upstream result
07:16:36 :142.250.207.46
07:16:37 :142.250.207.46

// The dig results is matched with the running node one as you can see the above one.
$ oc rsh  test-7cc4488d48-tqc4m bash -c 'while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done'
:
07:16:35 :172.217.175.238 
07:16:36 :172.217.175.238 <--- At the same time, the pod dig result is also refreshed.
07:16:37 :142.250.207.46
07:16:38 :142.250.207.46


But in v4.10 case, in contrast, the dns query result is various and responded randomly regardless local dns results on the node as follows.

# In OCP v4.10.23 case, pod's response from DNS services are not consistent.
$ oc rsh test-848fcf8ddb-zrcbx  bash -c 'while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done'
07:23:00 :142.250.199.110
07:23:01 :142.250.207.46
07:23:02 :142.250.207.46
07:23:03 :142.250.199.110
07:23:04 :142.250.199.110
07:23:05 :172.217.161.78

# Even though the node which is running the pod keep responding the same IP...
sh-4.4# while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done
07:23:00 :172.217.161.78
07:23:01 :172.217.161.78
07:23:02 :172.217.161.78
07:23:03 :172.217.161.78
07:23:04 :172.217.161.78
07:23:05 :172.217.161.78

Version-Release number of selected component (if applicable):

v4.10.23 (ROSA)
SDN: OpenShiftSDN

How reproducible:

You can always reproduce this issue using "dig google.com" from both any pod and the node the pod running according to the above "Description" details.

Steps to Reproduce:

1. Run any usual pod, and check which node the pod is running on.
2. Run dig google.com on the pod and the node.
3. Check the IP is consistent with the running node each other. 

Actual results:

The response IPs are not consistent and random IP is responded.

Expected results:

The response IP is kind of consistent, and aware of prefer local dns.

Additional info:

This issue affects EgressNetworkPolicy dnsName feature.

• https://github.com/openshift/sdn/pull/466
• https://github.com/openshift/sdn/pull/456

Description of problem:

Currently when installing Openshift on the Openstack cluster name length limit is allowed to  14 characters.
Customer wants to know if is it possible to override this validation when installing Openshift on Openstack and create a cluster name that is greater than 14 characters.

Version : OCP 4.8.5 UPI Disconnected 
Environment : Openstack 16 

Issue:
User reports that they are getting error for OCP cluster in Openstack UPI, where the name of the cluster is > 14 characters.

Error events :
~~~
fatal: [localhost]: FAILED! => {"changed": true, "cmd": ["/usr/local/bin/openshift-install", "create", "manifests", "--dir=/home/gitlab-runner/builds/WK8mkokN/0/CPE/SKS/pipelines/non-prod/ocp4-openstack-build/ocpinstaller/install-upi"], "delta": "0:00:00.311397", "end": "2022-09-03 21:38:41.974608", "msg": "non-zero return code", "rc": 1, "start": "2022-09-03 21:38:41.663211", "stderr": "level=fatal msg=failed to fetch Master Machines: failed to load asset \"Install Config\": invalid \"install-config.yaml\" file: metadata.name: Invalid value: \"sks-osp-inf-cpe-1-cbr1a\": cluster name is too long, please restrict it to 14 characters", "stderr_lines": ["level=fatal msg=failed to fetch Master Machines: failed to load asset \"Install Config\": invalid \"install-config.yaml\" file: metadata.name: Invalid value: \"sks-osp-inf-cpe-1-cbr1a\": cluster name is too long, please restrict it to 14 characters"], "stdout": "", "stdout_lines": []}
~~~

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:

Actual results:

Users are getting error "cluster name is too long" when clustername contains more than 14 characters for OCP on Openstack

Expected results:

The 14 characters limit should be change for the OCP clustername on Openstack

Additional info:

• https://github.com/openshift/installer/pull/6355

plus smaller fixes
this is a backport of https://github.com/openshift/cluster-baremetal-operator/pull/263

• https://github.com/openshift/cluster-baremetal-operator/pull/290

This is a clone of issue OCPBUGS-1629. The following is the description of the original issue:
—
Description of problem:

It is a disconnected cluster on AWS. There is an issue configuring Egress IP where the cluster uses STS. While looking into cloud-network-config-controller pod it is trying to connect to the global sts service "https://sts.amazonaws.com/" rather it should connect to the regional one "https://ec2.ap-southeast-1.amazonaws.com".

Version-Release number of selected component (if applicable):

How reproducible:

Always

Steps to Reproduce:

1. Create a disconected OCP cluster on AWS.

$ oc get netnamespace | grep egress
egress-ip-test                                     2689387    ["172.16.1.24"]

$ oc get hostsubnet
NAME                                              HOST                                              HOST IP        SUBNET          EGRESS CIDRS   EGRESS IPS
ip-172-16-1-151.ap-southeast-1.compute.internal   ip-172-16-1-151.ap-southeast-1.compute.internal   172.16.1.151   10.130.0.0/23                  
ip-172-16-1-53.ap-southeast-1.compute.internal    ip-172-16-1-53.ap-southeast-1.compute.internal    172.16.1.53    10.131.0.0/23                  ["172.16.1.24"]
ip-172-16-2-15.ap-southeast-1.compute.internal    ip-172-16-2-15.ap-southeast-1.compute.internal    172.16.2.15    10.128.0.0/23                  
ip-172-16-2-77.ap-southeast-1.compute.internal    ip-172-16-2-77.ap-southeast-1.compute.internal    172.16.2.77    10.128.2.0/23                  
ip-172-16-3-111.ap-southeast-1.compute.internal   ip-172-16-3-111.ap-southeast-1.compute.internal   172.16.3.111   10.129.0.0/23                  
ip-172-16-3-79.ap-southeast-1.compute.internal    ip-172-16-3-79.ap-southeast-1.compute.internal    172.16.3.79    10.129.2.0/23                  

$ oc logs sdn-controller-6m5kb -n openshift-sdn I0922 04:09:53.348615       1 vnids.go:105] Allocated netid 2689387 for namespace "egress-ip-test"
E0922 04:24:00.682018       1 egressip.go:254] Ignoring invalid HostSubnet ip-172-16-1-53.ap-southeast-1.compute.internal (host: "ip-172-16-1-53.ap-southeast-1.compute.internal", ip: "172.16.1.53", subnet: "10.131.0.0/23"): related node object "ip-172-16-1-53.ap-southeast-1.compute.internal" has an incomplete annotation "cloud.network.openshift.io/egress-ipconfig", CloudEgressIPConfig: <nil>

 $ oc logs cloud-network-config-controller-5c7556db9f-x78bs -n openshift-cloud-network-config-controller

E0922 04:26:59.468726       1 controller.go:165] error syncing 'ip-172-16-2-77.ap-southeast-1.compute.internal': error retrieving the private IP configuration for node: ip-172-16-2-77.ap-southeast-1.compute.internal, err: error: cannot list ec2 instance for node: ip-172-16-2-77.ap-southeast-1.compute.internal, err: WebIdentityErr: failed to retrieve credentials
caused by: RequestError: send request failed
caused by: Post "https://sts.amazonaws.com/": dial tcp 54.239.29.25:443: i/o timeout, requeuing in node workqueue

$ oc get Infrastructure -o yaml
apiVersion: v1
items:
- apiVersion: config.openshift.io/v1
  kind: Infrastructure
  metadata:
    creationTimestamp: "2022-09-22T03:28:15Z"
    generation: 1
    name: cluster
    resourceVersion: "598"
    uid: 994da301-2a96-43b7-b43b-4b7c18d4b716
  spec:
    cloudConfig:
      name: ""
    platformSpec:
      aws:
        serviceEndpoints:
        - name: sts
          url: https://sts.ap-southeast-1.amazonaws.com
        - name: ec2
          url: https://ec2.ap-southeast-1.amazonaws.com
        - name: elasticloadbalancing
          url: https://elasticloadbalancing.ap-southeast-1.amazonaws.com
      type: AWS
  status:
    apiServerInternalURI: https://api-int.openshiftyy.ocpaws.sadiqueonline.com:6443
    apiServerURL: https://api.openshiftyy.ocpaws.sadiqueonline.com:6443
    controlPlaneTopology: HighlyAvailable
    etcdDiscoveryDomain: ""
    infrastructureName: openshiftyy-wfrpf
    infrastructureTopology: HighlyAvailable
    platform: AWS
    platformStatus:
      aws:
        region: ap-southeast-1
        serviceEndpoints:
        - name: ec2
          url: https://ec2.ap-southeast-1.amazonaws.com
        - name: elasticloadbalancing
          url: https://elasticloadbalancing.ap-southeast-1.amazonaws.com
        - name: sts
          url: https://sts.ap-southeast-1.amazonaws.com
      type: AWS
kind: List
metadata:
  resourceVersion: ""

$ oc get secret aws-cloud-credentials -n openshift-machine-api -o json |jq -r .data.credentials |base64 -d 
[default]
sts_regional_endpoints = regional
role_arn = arn:aws:iam::015719942846:role/sputhenp-sts-yy-openshift-machine-api-aws-cloud-credentials
web_identity_token_file = /var/run/secrets/openshift/serviceaccount/token
 
[ec2-user@ip-172-17-1-229 ~]$ oc get secret cloud-credential-operator-iam-ro-creds -n openshift-cloud-credential-operator -o json |jq -r .data.credentials |base64 -d 
[default]
sts_regional_endpoints = regional
role_arn = arn:aws:iam::015719942846:role/sputhenp-sts-yy-openshift-cloud-credential-operator-cloud-creden
web_identity_token_file = /var/run/secrets/openshift/serviceaccount/token
 
[ec2-user@ip-172-17-1-229 ~]$ oc get secret installer-cloud-credentials -n openshift-image-registry -o json |jq -r .data.credentials |base64 -d 
[default]
sts_regional_endpoints = regional
role_arn = arn:aws:iam::015719942846:role/sputhenp-sts-yy-openshift-image-registry-installer-cloud-credent
web_identity_token_file = /var/run/secrets/openshift/serviceaccount/token
 
[ec2-user@ip-172-17-1-229 ~]$ oc get secret cloud-credentials -n openshift-ingress-operator -o json |jq -r .data.credentials |base64 -d 
[default]
sts_regional_endpoints = regional
role_arn = arn:aws:iam::015719942846:role/sputhenp-sts-yy-openshift-ingress-operator-cloud-credentials
web_identity_token_file = /var/run/secrets/openshift/serviceaccount/token
 
[ec2-user@ip-172-17-1-229 ~]$ oc get secret cloud-credentials -n openshift-cloud-network-config-controller -o json |jq -r .data.credentials |base64 -d 
[default]
sts_regional_endpoints = regional
role_arn = arn:aws:iam::015719942846:role/sputhenp-sts-yy-openshift-cloud-network-config-controller-cloud-
web_identity_token_file = /var/run/secrets/openshift/serviceaccount/token
 
[ec2-user@ip-172-17-1-229 ~]$ oc get secret ebs-cloud-credentials -n openshift-cluster-csi-drivers -o json |jq -r .data.credentials |base64 -d
[default]
sts_regional_endpoints = regional
role_arn = arn:aws:iam::015719942846:role/sputhenp-sts-yy-openshift-cluster-csi-drivers-ebs-cloud-credenti
web_identity_token_file = /var/run/secrets/openshift/serviceaccount/token
 

Actual results:

Egress IP not configured properly and cloud-network-config-controller trying to connect to global STS service.

Expected results:

Egress IP should get configured and cloud-network-config-controller should connect to regional STS service instead of global.

Additional info:

• https://github.com/openshift/cloud-network-config-controller/pull/63

This is a clone of issue OCPBUGS-1226. The following is the description of the original issue:
—
We added server groups for control plane and computes as part of OSASINFRA-2570, except for UPI that only creates server group for the control plane.

We need to update the UPI scripts to create server group for computes to be consistent with IPI and have the instruction at https://docs.openshift.com/container-platform/4.11/machine_management/creating_machinesets/creating-machineset-osp.html work out of the box in case customers want to create MachineSets on their UPI clusters.

Related to OCPCLOUD-1135.

• https://github.com/openshift/installer/pull/6351

Description of problem:

Availability Set will be created when vmSize is invalid in a region which has zones, but Availability Set should only be created in a region which don’t have zones.

Version-Release number of selected component (if applicable):

4.11.0-0.nightly-2022-10-07-174524
4.10.0-0.nightly-2022-10-07-205844

How reproducible:

Always

Steps to Reproduce:

1.Set up a cluster in a region which has zones. 
liuhuali@Lius-MacBook-Pro huali-test % oc get machine
NAME                                     PHASE     TYPE              REGION   ZONE   AGE
huliu-az410-99qcm-master-0               Running   Standard_D8s_v3   eastus   2      34m
huliu-az410-99qcm-master-1               Running   Standard_D8s_v3   eastus   3      34m
huliu-az410-99qcm-master-2               Running   Standard_D8s_v3   eastus   1      34m
huliu-az410-99qcm-worker-eastus1-xld58   Running   Standard_D4s_v3   eastus   1      27m
huliu-az410-99qcm-worker-eastus2-chzg8   Running   Standard_D4s_v3   eastus   2      27m
huliu-az410-99qcm-worker-eastus3-7g2mw   Running   Standard_D4s_v3   eastus   3      27m

2.Create a machineset with invalid vmSize 
liuhuali@Lius-MacBook-Pro huali-test % oc create -f ms4.yaml 
machineset.machine.openshift.io/huliu-az410-99qcm-1 created
liuhuali@Lius-MacBook-Pro huali-test % oc get machine                                                       
NAME                                     PHASE     TYPE              REGION   ZONE   AGE
huliu-az410-99qcm-1-cfw6w                Failed                                      8s
huliu-az410-99qcm-master-0               Running   Standard_D8s_v3   eastus   2      35m
huliu-az410-99qcm-master-1               Running   Standard_D8s_v3   eastus   3      35m
huliu-az410-99qcm-master-2               Running   Standard_D8s_v3   eastus   1      35m
huliu-az410-99qcm-worker-eastus1-xld58   Running   Standard_D4s_v3   eastus   1      28m
huliu-az410-99qcm-worker-eastus2-chzg8   Running   Standard_D4s_v3   eastus   2      28m
huliu-az410-99qcm-worker-eastus3-7g2mw   Running   Standard_D4s_v3   eastus   3      28m
liuhuali@Lius-MacBook-Pro huali-test % oc get machine huliu-az410-99qcm-1-cfw6w  -o yaml
apiVersion: machine.openshift.io/v1beta1
kind: Machine
metadata:
  annotations:
    machine.openshift.io/instance-state: Unknown
  creationTimestamp: "2022-10-08T07:42:28Z"
  finalizers:
  - machine.machine.openshift.io
  generateName: huliu-az410-99qcm-1-
  generation: 2
  labels:
    machine.openshift.io/cluster-api-cluster: huliu-az410-99qcm
    machine.openshift.io/cluster-api-machine-role: worker
    machine.openshift.io/cluster-api-machine-type: worker
    machine.openshift.io/cluster-api-machineset: huliu-az410-99qcm-1
  name: huliu-az410-99qcm-1-cfw6w
  namespace: openshift-machine-api
  ownerReferences:
  - apiVersion: machine.openshift.io/v1beta1
    blockOwnerDeletion: true
    controller: true
    kind: MachineSet
    name: huliu-az410-99qcm-1
    uid: bf8f7518-1fa9-4704-bdd7-6d0fde54e38e
  resourceVersion: "31287"
  uid: 303cf672-a2fa-44f3-8793-59801bb78902
spec:
  lifecycleHooks: {}
  metadata: {}
  providerSpec:
    value:
      apiVersion: machine.openshift.io/v1beta1
      credentialsSecret:
        name: azure-cloud-credentials
        namespace: openshift-machine-api
      image:
        offer: ""
        publisher: ""
        resourceID: /resourceGroups/huliu-az410-99qcm-rg/providers/Microsoft.Compute/images/huliu-az410-99qcm
        sku: ""
        version: ""
      kind: AzureMachineProviderSpec
      location: eastus
      managedIdentity: huliu-az410-99qcm-identity
      metadata:
        creationTimestamp: null
        name: huliu-az410-99qcm
      networkResourceGroup: huliu-az410-99qcm-rg
      osDisk:
        diskSettings: {}
        diskSizeGB: 128
        managedDisk:
          storageAccountType: Premium_LRS
        osType: Linux
      publicIP: false
      publicLoadBalancer: huliu-az410-99qcm
      resourceGroup: huliu-az410-99qcm-rg
      spotVMOptions: {}
      subnet: huliu-az410-99qcm-worker-subnet
      userDataSecret:
        name: worker-user-data
      vmSize: invalidStandard_D4s_v3
      vnet: huliu-az410-99qcm-vnet
      zone: "3"
status:
  conditions:
  - lastTransitionTime: "2022-10-08T07:42:28Z"
    status: "True"
    type: Drainable
  - lastTransitionTime: "2022-10-08T07:42:28Z"
    message: Instance has not been created
    reason: InstanceNotCreated
    severity: Warning
    status: "False"
    type: InstanceExists
  - lastTransitionTime: "2022-10-08T07:42:28Z"
    status: "True"
    type: Terminable
  errorMessage: 'failed to reconcile machine "huliu-az410-99qcm-1-cfw6w": failed to
    create vm huliu-az410-99qcm-1-cfw6w: failure sending request for machine huliu-az410-99qcm-1-cfw6w:
    cannot create vm: compute.VirtualMachinesClient#CreateOrUpdate: Failure sending
    request: StatusCode=0 -- Original Error: Code="BadRequest" Message="Virtual Machine
    cannot be created because both Availability Zone and Availability Set were specified.
    Deploying an Availability Set to an Availability Zone isn’t supported."'
  errorReason: InvalidConfiguration
  lastUpdated: "2022-10-08T07:42:35Z"
  phase: Failed
  providerStatus:
    conditions:
    - lastProbeTime: "2022-10-08T07:42:35Z"
      lastTransitionTime: "2022-10-08T07:42:35Z"
      message: 'failed to create vm huliu-az410-99qcm-1-cfw6w: failure sending request
        for machine huliu-az410-99qcm-1-cfw6w: cannot create vm: compute.VirtualMachinesClient#CreateOrUpdate:
        Failure sending request: StatusCode=0 -- Original Error: Code="BadRequest"
        Message="Virtual Machine cannot be created because both Availability Zone
        and Availability Set were specified. Deploying an Availability Set to an Availability
        Zone isn’t supported."'
      reason: MachineCreationFailed
      status: "True"
      type: MachineCreated
    metadata: {}

Actual results:

Created Availability Set for it.

Expected results:

Should not create Availability Set, as the region has zones.

Additional info:

If provided correct vmSize, the machine get Running and will not create Availability Set for it. Not sure why it will create Availability Set for it when vmSize is invalid.

The issue can be reproduced both on 4.11 and 4.10 version, as Availability Set is introduced in 4.10. 
On 4.12, there is bug https://issues.redhat.com/browse/OCPBUGS-1871, will also check this on 4.12 when this bug get verified.

• https://github.com/openshift/machine-api-provider-azure/pull/41

Description of problem:

This issue exists to drive the backport process of https://github.com/openshift/api/pull/1313

According to the Kubernetes documentation, starting from Kubernetes 1.22, the service-account-issuer flag can be specified multiple times. The first value is then used to generate new tokens and other values are accepted. Using this field can prevent cluster disruptions and allows for smoother reconfiguration of this field.

see: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#service-account-token-volume-projection

The status field will allow us to keep track of "used" service account issuers and also expire/prune them.

this is a replacement for: #1309

xref: https://issues.redhat.com/browse/AUTH-309

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:

1.
2.
3.

Actual results:

Expected results:

Additional info:

• https://github.com/openshift/cluster-kube-apiserver-operator/pull/1394

This is a copy of Bugzilla bug 2117524 for backport to 4.11.z

Original Text:

Description of problem:
On routers configured with mTLS and CRL defined in the CA with a CDP ; new CRL is downloaded only when restarting the ingress-operator.

2022-07-20T23:36:26.943Z	INFO	operator.clientca_configmap_controller	controller/controller.go:298	reconciling	{"request": "openshift-ingress-operator/service-bdrc"}
2022-07-20T23:36:26.943Z	INFO	operator.crl	crl/crl_configmap.go:69	certificate revocation list has expired	{"subject key identifier": "6aa909992e9890457b2a8de5659a44cab8e867a8"}
2022-07-20T23:36:26.943Z	INFO	operator.crl	crl/crl_configmap.go:69	retrieving certificate revocation list	{"subject key identifier": "6aa909992e9890457b2a8de5659a44cab8e867a8"}
2022-07-20T23:36:26.943Z	INFO	operator.crl	crl/crl_configmap.go:169	retrieving CRL distribution point	{"distribution point": "http://crl.domain.com/der/CN=XXXX,OU=XXX,O=XXX,C=XXX"}

Version-Release number of selected component (if applicable):
4.9.33

How reproducible:
Enable mTLS with a CRL

Actual results:
CRL is not download when expired
Clients get "SSL client certificate not trusted" errors while accessing resources

Expected results:
ingress-operator triggers CRL download when approaching expiration date so that the configmap is updated without manual action

• https://github.com/openshift/cluster-ingress-operator/pull/853

This is a clone of issue OCPBUGS-3111. The following is the description of the original issue:
—
This is a clone of issue OCPBUGS-2992. The following is the description of the original issue:
—
Description of problem:

The metal3-ironic container image in OKD fails during steps in configure-ironic.sh that look for additional Oslo configuration entries as environment variables to configure the Ironic instance. The mechanism by which it fails in OKD but not OpenShift is that the image for OpenShift happens to have unrelated variables set which match the regex, because it is based on the builder image, but the OKD image is based only on a stream8 image without these unrelated OS_ prefixed variables set.

The metal3 pod created in response to even a provisioningNetwork: Disabled Provisioning object will therefore crashloop indefinitely.

Version-Release number of selected component (if applicable):

4.11

How reproducible:

Always

Steps to Reproduce:

1. Deploy OKD to a bare metal cluster using the assisted-service, with the OKD ConfigMap applied to podman play kube, as in :https://github.com/openshift/assisted-service/tree/master/deploy/podman#okd-configuration
2. Observe the state of the metal3 pod in the openshift-machine-api namespace.

Actual results:

The metal3-ironic container repeatedly exits with nonzero, with the logs ending here:

++ export IRONIC_URL_HOST=10.1.1.21
++ IRONIC_URL_HOST=10.1.1.21
++ export IRONIC_BASE_URL=https://10.1.1.21:6385
++ IRONIC_BASE_URL=https://10.1.1.21:6385
++ export IRONIC_INSPECTOR_BASE_URL=https://10.1.1.21:5050
++ IRONIC_INSPECTOR_BASE_URL=https://10.1.1.21:5050
++ '[' '!' -z '' ']'
++ '[' -f /etc/ironic/ironic.conf ']'
++ cp /etc/ironic/ironic.conf /etc/ironic/ironic.conf_orig
++ tee /etc/ironic/ironic.extra
# Options set from Environment variables
++ echo '# Options set from Environment variables'
++ env
++ grep '^OS_'
++ tee -a /etc/ironic/ironic.extra

Expected results:

The metal3-ironic container starts and the metal3 pod is reported as ready.

Additional info:

This is the PR that introduced pipefail to the downstream ironic-image, which is not yet accepted in the upstream:
https://github.com/openshift/ironic-image/pull/267/files#diff-ab2b20df06f98d48f232d90f0b7aa464704257224862780635ec45b0ce8a26d4R3

This is the line that's failing:
https://github.com/openshift/ironic-image/blob/4838a077d849070563b70761957178055d5d4517/scripts/configure-ironic.sh#L57

This is the image base that OpenShift uses for ironic-image (before rewriting in ci-operator):
https://github.com/openshift/ironic-image/blob/4838a077d849070563b70761957178055d5d4517/Dockerfile.ocp#L9

Here is where the relevant environment variables are set in the builder images for OCP:
https://github.com/openshift/builder/blob/973602e0e576d7eccef4fc5810ba511405cd3064/hack/lib/build/version.sh#L87

Here is the final FROM line in the OKD image build (just stream8):
https://github.com/openshift/ironic-image/blob/4838a077d849070563b70761957178055d5d4517/Dockerfile.okd#L9

This results in the following differences between the two images:
$ podman run --rm -it --entrypoint bash quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:519ac06836d972047f311de5e57914cf842716e22a1d916a771f02499e0f235c -c 'env | grep ^OS_'
OS_GIT_MINOR=11
OS_GIT_TREE_STATE=clean
OS_GIT_COMMIT=97530a7
OS_GIT_VERSION=4.11.0-202210061001.p0.g97530a7.assembly.stream-97530a7
OS_GIT_MAJOR=4
OS_GIT_PATCH=0
$ podman run --rm -it --entrypoint bash quay.io/openshift/okd-content@sha256:6b8401f8d84c4838cf0e7c598b126fdd920b6391c07c9409b1f2f17be6d6d5cb -c 'env | grep ^OS_'

Here is what the OS_ prefixed variables should be used for:
https://github.com/metal3-io/ironic-image/blob/807a120b4ce5e1675a79ebf3ee0bb817cfb1f010/README.md?plain=1#L36
https://opendev.org/openstack/oslo.config/src/commit/84478d83f87e9993625044de5cd8b4a18dfcaf5d/oslo_config/sources/_environment.py

It's worth noting that ironic.extra is not consumed anywhere, and is simply being used here to save off the variables that Oslo _might_ be consuming (it won't consume the variables that are present in the OCP builder image, though they do get caught by this regex).

With pipefail set, grep returns non-zero when it fails to find an environment variable that matches the regex, as in the case of the OKD ironic-image builds.

• https://github.com/openshift/ironic-image/pull/318

Description of problem: Backport owners for 4.11 (only)

• https://github.com/openshift/console/pull/11936

This is a backport from https://issues.redhat.com/browse/OCPBUGS-1044

Description of problem:

https://github.com/prometheus/node_exporter/issues/2299

The node exporter pod when ran on a bare metal worker using an AMD EPYC CPU crashes and fails to start up and crashes with the following error message.    State:       Waiting
      Reason:    CrashLoopBackOff
    Last State:  Terminated
      Reason:    Error
      Message:   05.145Z caller=node_exporter.go:115 level=info collector=tapestats
ts=2022-09-07T20:25:05.145Z caller=node_exporter.go:115 level=info collector=textfile
ts=2022-09-07T20:25:05.145Z caller=node_exporter.go:115 level=info collector=thermal_zone
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=time
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=timex
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=udp_queues
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=uname
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=vmstat
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=xfs
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:115 level=info collector=zfs
ts=2022-09-07T20:25:05.146Z caller=node_exporter.go:199 level=info msg="Listening on" address=127.0.0.1:9100
ts=2022-09-07T20:25:05.146Z caller=tls_config.go:195 level=info msg="TLS is disabled." http2=false
panic: "node_rapl_package-0-die-0_joules_total" is not a valid metric name

 Apparently this is a known issue (See Github link) and was fixed in a later upstream.

Version-Release number of selected component (if applicable):

4.11.0

How reproducible:

Every-time 

Steps to Reproduce:

1. Provision a bare metal node using an AMD EPYC CPU
2. Node-exporter pods that try to start on the nodes will crash with error message

Actual results:

Node-exporter pods cannot run on the new nodes 

Expected results:

Node exporter pods should be able to start up and run like on any other node

Additional info:

As mentioned above this issue was tracked and fixed in a later upstream of node-exporter

https://github.com/prometheus/node_exporter/issues/2299

Would we be able to get the fixed version pulled for 4.11?

• https://github.com/openshift/node_exporter/pull/108

Description of problem:

Sometimes we see VMs fail to power on when the land on a host that does not have enough resources. The current power on does not retry or leverage DRS to power on the node on a suitable host.

https://github.com/vmware/govmomi/issues/1026

Our code is still making calls to PowerOnVM_Task which, according to the vsphere docs, is deprecated and we should use PowerOnMultiVM_Task instead.

PowerOnVM_Task does not return a DRS ClusterRecommendation, no vmotion nor host power operations will be done as part of a DRS-facilitated power on. To have DRS consider such operations use PowerOnMultiVM_Task.

https://vdc-download.vmware.com/vmwb-repository/dcr-public/b50dcbbf-051d-4204-a3e7-e1b618c1e384/538cf2ec-b34f-4bae-a332-3820ef9e7773/vim.VirtualMachine.html#powerOn:
As of vSphere API 5.1, use of this method with vCenter Server is deprecated; use PowerOnMultiVM_Task instead.

Version-Release number of selected component (if applicable):
4.8.x

How reproducible:
Always

Steps to Reproduce:
1.
2.
3.

Actual results:
Sometimes powers on fails requiring manual intervention.

Expected results:
PowerOn should use DRS to ensure it's always successful.

Additional info:

• https://github.com/openshift/machine-api-operator/pull/1064

Description of problem:

This is a clone of https://bugzilla.redhat.com/show_bug.cgi?id=2074299 for backporting purposes.

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:

1.
2.
3.

Actual results:

Expected results:

Additional info:

• https://github.com/openshift/installer/pull/6652

This is a clone of issue OCPBUGS-78. The following is the description of the original issue:
—
Copied from an upstream issue: https://github.com/operator-framework/operator-lifecycle-manager/issues/2830

What did you do?

When attempting to reinstall an operator that uses conversion webhooks by

• Deleting the operator subscription and any CSVs associated with it
• Recreating the operator subscription

The resulting InstallPlan enters a failed state with message similar to

error validating existing CRs against new CRD's schema for "devworkspaces.workspace.devfile.io": error listing resources in GroupVersionResource schema.GroupVersionResource{Group:"workspace.devfile.io", Version:"v1alpha1", Resource:"devworkspaces"}: conversion webhook for workspace.devfile.io/v1alpha2, Kind=DevWorkspace failed: Post "https://devworkspace-controller-manager-service.test-namespace.svc:443/convert?timeout=30s": service "devworkspace-controller-manager-service" not found

When the original CSVs are deleted, the operator's main deployment and service are removed, but CRDs are left in-cluster. However, since the service/CA bundle/deployment that serve the conversion webhook are removed, conversion webhooks are broken at that point. Eventually this impacts garbage collection on the cluster as well.

This can be reproduced by installing the DevWorkspace Operator from the Red Hat catalog. (I can provide yamls/upstream images that reproduce as well, if that's helpful). It may be necessary to create a DevWorkspace in the cluster before deletion, e.g. by oc apply -f https://raw.githubusercontent.com/devfile/devworkspace-operator/main/samples/plain.yaml

What did you expect to see?
Operator is able to be reinstalled without removing CRDs and all instances.

What did you see instead? Under which circumstances?
It's necessary to completely remove the operator including CRDs. For our operator (DevWorkspace), this also makes uninstall especially complicated as finalizers are used (so CRDs cannot be deleted if the controller is removed, and the controller cannot be restored by reinstalling)

Environment

operator-lifecycle-manager version: 4.10.24

Kubernetes version information: Kubernetes Version: v1.23.5+012e945 (OpenShift 4.10.24)

Kubernetes cluster kind: OpenShift

• https://github.com/openshift/operator-framework-olm/pull/388

Description of problem:

When the user installs a helm chart, the dropdown to select a specific version is always disabled. Also for helm charts that can upgraded or downgraded after installation. For example the nodejs helm chart.

Version-Release number of selected component (if applicable):

At least 4.11, maybe all versions, but a backport to 4.11 is fine

How reproducible:

Always

Steps to Reproduce:

1. Switch to developer perspective
2. Navigate to Add > Helm chart
3. Select the Nodejs helm chart
4. Try to select another version
..
When the user installs the not selectable version and edit the helm chart there is another version to selec 

Actual results:

The version is not selectable.

Expected results:

The version should be selectable.

Additional info:

• https://github.com/openshift/console/pull/12135

Description of problem:

There is a bug affecting verify steps functionality on iDRAC hardware in OpenShift 4.11 and 4.10. Original bug report has been made against 4.10:

https://issues.redhat.com/browse/OCPBUGS-1740

While I am not aware of this issue being reported against 4.11, due to the fact that the fix is only present in 4.12 codebase, 4.11 versions will also be affected by this issue.

This bug is created to meet automation requirements for backporting the fixes from 4.12 version to 4.11 (and then to 4.11 in the bug quoted above).

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:

1.
2.
3.

Actual results:

Expected results:

Additional info:

• https://github.com/openshift/ironic-image/pull/302

This is a clone of issue OCPBUGS-1237. The following is the description of the original issue:
—
job=pull-ci-openshift-origin-master-e2e-gcp-builds=all

This test has started permafailing on e2e-gcp-builds:

[sig-builds][Feature:Builds][Slow] s2i build with environment file in sources Building from a template should create a image from "test-env-build.json" template and run it in a pod [apigroup:build.openshift.io][apigroup:image.openshift.io]

The error in the test says

Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:21 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} Pulling: Pulling image "image-registry.openshift-image-registry.svc:5000/e2e-test-build-sti-env-nglnt/test@sha256:262820fd1a94d68442874346f4c4024fdf556631da51cbf37ce69de094f56fe8"
Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:23 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} Pulled: Successfully pulled image "image-registry.openshift-image-registry.svc:5000/e2e-test-build-sti-env-nglnt/test@sha256:262820fd1a94d68442874346f4c4024fdf556631da51cbf37ce69de094f56fe8" in 1.763914719s
Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:23 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} Created: Created container test
Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:23 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} Started: Started container test
Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:24 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} Pulled: Container image "image-registry.openshift-image-registry.svc:5000/e2e-test-build-sti-env-nglnt/test@sha256:262820fd1a94d68442874346f4c4024fdf556631da51cbf37ce69de094f56fe8" already present on machine
Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:25 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} Unhealthy: Readiness probe failed: Get "http://10.129.2.63:8080/": dial tcp 10.129.2.63:8080: connect: connection refused
Sep 13 07:03:30.345: INFO: At 2022-09-13 07:00:26 +0000 UTC - event for build-test-pod: {kubelet ci-op-kg1t2x13-4e3c6-7hrm8-worker-a-66nwd} BackOff: Back-off restarting failed container

• https://github.com/openshift/origin/pull/27480

Description of problem:
Users on a fully-disconnected cluster could not see Devfiles in the developer catalog or import a Devfiles. That's fine.

But the API calls /api/devfile/samples/ and /api/devfile/ takes 30 seconds until they fail with a 504 Gateway timeout error.

If possible they should fail immediately.

Version-Release number of selected component (if applicable):
This might happen since 4.8

Tested this yet only on 4.12.0-0.nightly-2022-09-07-112008

How reproducible:
Always

Steps to Reproduce:

1. Start a disconnected cluster with a proxy
2. Open the browser network inspector and filter for /api/devfile
3. Switch to Developer perspective
   1. Navigate to Add > Developer Catalog (All Services) > Devfiles
   2. Or Add > Import from Git > and enter https://github.com/devfile-samples/devfile-sample-go-basic.git

Actual results:

• Network call fails after 30 seconds
• Import doesn't work

Expected results:

• Network calls should fail immediately
• We doesn't expect that the import will work

Additional info:
The console Pod log contains this error:

E0909 10:28:18.448680 1 devfile-handler.go:74] Failed to parse devfile: failed to populateAndParseDevfile: Get "https://registry.devfile.io/devfiles/go": context deadline exceeded (Client.Timeout exceeded while awaiting headers)

• https://github.com/openshift/console/pull/12186

This bug is a backport clone of [Bugzilla Bug 2073220](https://bugzilla.redhat.com/show_bug.cgi?id=2073220). The following is the description of the original bug:
—
Description of problem:

https://docs.openshift.com/container-platform/4.10/security/audit-log-policy-config.html#about-audit-log-profiles_audit-log-policy-config

Version-Release number of selected component (if applicable): 4.*

How reproducible: always

Steps to Reproduce:
1. Set audit profile to WriteRequestBodies
2. Wait for api server rollout to complete
3. tail -f /var/log/kube-apiserver/audit.log | grep routes/status

Actual results:

Write events to routes/status are recorded at the RequestResponse level, which often includes keys and certificates.

Expected results:

Events involving routes should always be recorded at the Metadata level, per the documentation at https://docs.openshift.com/container-platform/4.10/security/audit-log-policy-config.html#about-audit-log-profiles_audit-log-policy-config

Additional info:

• https://github.com/openshift/cluster-kube-apiserver-operator/pull/1422
• https://github.com/openshift/cluster-openshift-apiserver-operator/pull/513

Description of problem:

When a pod runs to a completed state, we typically rely on the update event that will indicate to us that this pod is completed. At that point the pod IP is released and the port configuration is removed in OVN. The subsequent delete event for this pod will be ignored because it should have been cleaned up in the previous update.

However, there can be cases where the update event is missed with pod completed. In this case we will only receive a delete with pod completed event, and ignore tearing down the pod. The end result is the pod is not cleaned up in OVN and the IP address remains allocated, reducing the amount of address range available to launch another pod. This can lead to exhausting all IP addresses available for pod allocation on a node.

Version-Release number of selected component (if applicable):

4.10.24

How reproducible:

Not sure how to reproduce this. I'm guessing some lag in kapi updates can cause the completed update event and the final delete event to be combined into a single event.

Steps to Reproduce:

1.
2.
3.

Actual results:

Port still exists in OVN, IP remains allocated for a deleted pod.

Expected results:

IP should be freed, port should be removed from OVN.

Additional info:

• https://github.com/openshift/ovn-kubernetes/pull/1455

Description of problem:

Setting a telemeter proxy in the cluster-monitoring-config config map does not work as expected

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:
the following KCS details steps to add a proxy.
The steps have been verified at 4.7 but do not work at 4.8, 4.9 or 4.10

https://access.redhat.com/solutions/6172402

When testing at 4.8, 4.9 and 4.10 the proxy setting where also nested under `telemeterClient`

which triggered a telemeter restart but the proxy setting do not get set in the deployment as they do in 4.7

Actual results:

4.8, 4.9 and 4.10 without the nested `telemeterClient`
does not trigger a restart of the telemeter pod

Expected results:

I think the proxy setting should be nested under telemeterClient
but should set the environment variables in the deployment

Additional info:

This is a backport of https://bugzilla.redhat.com/show_bug.cgi?id=2116382 from 4.12 to 4.11.z. Creating manually because as seen in https://github.com/openshift/cluster-monitoring-operator/pull/1743 `/cherry-pick` doesn't work for bugs originally created in bugzilla

• https://github.com/openshift/cluster-monitoring-operator/pull/1743

The two modules that are auto generated for the CLI docs need to add ":_content-type: REFERENCE" to the top of the files. Update the doc generation templates to add these.

• https://github.com/openshift/oc/pull/1072

Description of problem:

Manual backport of 
* https://github.com/openshift/cluster-dns-operator/pull/336
* https://github.com/openshift/cluster-dns-operator/pull/339

Version-Release number of selected component (if applicable):

4.11

• https://github.com/openshift/cluster-dns-operator/pull/347

we need to make sure that the ironic containers use the latest available bugfix versions

• https://github.com/openshift/ironic-image/pull/336

Tracker issue for bootimage bump in 4.11. This issue should block issues which need a bootimage bump to fix.

The previous bump was OCPBUGS-562.

• https://github.com/openshift/installer/pull/6720

This is a clone of issue OCPBUGS-2083. The following is the description of the original issue:
—
Description of problem:
Currently we are running VMWare CSI Operator in OpenShift 4.10.33. After running vulnerability scans, the operator was discovered to be running a known weak cipher 3DES. We are attempting to upgrade or modify the operator to customize the ciphers available. We were looking at performing a manual upgrade via Quay.io but can't seem to pull the image and was trying to steer away from performing a custom install from scratch. Looking for any suggestions into mitigated the weak cipher in the kube-rbac-proxy under VMware CSI Operator.

Version-Release number of selected component (if applicable):

 

How reproducible:

Steps to Reproduce:

1.
2.
3.

Actual results:

Expected results:

Additional info:

• https://github.com/openshift/vmware-vsphere-csi-driver-operator/pull/119

This is a clone of issue OCPBUGS-268. The following is the description of the original issue:
—
The linux kernel was updated:
https://lkml.org/lkml/2020/3/20/1030
to include steal

accounting

This would greatly assist in troubleshooting vSphere performance issues
caused by over-provisioned ESXi hosts.

• https://github.com/openshift/installer/pull/6260
• https://github.com/openshift/machine-api-operator/pull/1081

This is a clone of issue OCPBUGS-212. The following is the description of the original issue:
—
Description of problem:

oc --context build02 get clusterversion
NAME      VERSION       AVAILABLE   PROGRESSING   SINCE   STATUS
version   4.12.0-ec.1   True        False         45h     Error while reconciling 4.12.0-ec.1: the cluster operator kube-controller-manager is degraded

oc --context build02 get co kube-controller-manager
NAME                      VERSION       AVAILABLE   PROGRESSING   DEGRADED   SINCE   MESSAGE
kube-controller-manager   4.12.0-ec.1   True        False         True       2y87d   GarbageCollectorDegraded: error fetching rules: Get "https://thanos-querier.openshift-monitoring.svc:9091/api/v1/rules": dial tcp 172.30.153.28:9091: connect: cannot assign requested address

Version-Release number of selected component (if applicable):

How reproducible:

Steps to Reproduce:
1.
2.
3.

Actual results:

Expected results:

Additional info:

build02 is a build farm cluster in CI production.
I can provide credentials to access the cluster if needed.

• https://github.com/openshift/cluster-kube-controller-manager-operator/pull/654

Description of problem:

Created two egressIP object, egressIPs in one egressIP object cannot be applied successfully 

Version-Release number of selected component (if applicable):

4.11.0-0.nightly-2022-11-27-164248

How reproducible:

Frequently happen in auto case

Steps to Reproduce:

1.  Label two nodes as egress nodes
  oc get nodes -o wide
NAME                                   STATUS   ROLES    AGE    VERSION           INTERNAL-IP   EXTERNAL-IP   OS-IMAGE                                                        KERNEL-VERSION                 CONTAINER-RUNTIME
huirwang-1128a-s6j6t-master-0          Ready    master   154m   v1.24.6+5658434   10.0.0.8      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-master-1          Ready    master   154m   v1.24.6+5658434   10.0.0.7      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-master-2          Ready    master   153m   v1.24.6+5658434   10.0.0.6      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-worker-westus-1   Ready    worker   135m   v1.24.6+5658434   10.0.1.5      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-worker-westus-2   Ready    worker   136m   v1.24.6+5658434   10.0.1.4      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8

 % oc get node huirwang-1128a-s6j6t-worker-westus-1 --show-labels
NAME                                   STATUS   ROLES    AGE    VERSION           LABELS
huirwang-1128a-s6j6t-worker-westus-1   Ready    worker   136m   v1.24.6+5658434   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/instance-type=Standard_D4s_v3,beta.kubernetes.io/os=linux,failure-domain.beta.kubernetes.io/region=westus,failure-domain.beta.kubernetes.io/zone=0,k8s.ovn.org/egress-assignable=true,kubernetes.io/arch=amd64,kubernetes.io/hostname=huirwang-1128a-s6j6t-worker-westus-1,kubernetes.io/os=linux,node-role.kubernetes.io/worker=,node.kubernetes.io/instance-type=Standard_D4s_v3,node.openshift.io/os_id=rhcos,topology.disk.csi.azure.com/zone=,topology.kubernetes.io/region=westus,topology.kubernetes.io/zone=0

 % oc get node huirwang-1128a-s6j6t-worker-westus-2 --show-labels
NAME                                   STATUS   ROLES    AGE    VERSION           LABELS
huirwang-1128a-s6j6t-worker-westus-2   Ready    worker   136m   v1.24.6+5658434   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/instance-type=Standard_D4s_v3,beta.kubernetes.io/os=linux,failure-domain.beta.kubernetes.io/region=westus,failure-domain.beta.kubernetes.io/zone=0,k8s.ovn.org/egress-assignable=true,kubernetes.io/arch=amd64,kubernetes.io/hostname=huirwang-1128a-s6j6t-worker-westus-2,kubernetes.io/os=linux,node-role.kubernetes.io/worker=,node.kubernetes.io/instance-type=Standard_D4s_v3,node.openshift.io/os_id=rhcos,topology.disk.csi.azure.com/zone=,topology.kubernetes.io/region=westus,topology.kubernetes.io/zone=0
2. Created two egressIP objects
3.

Actual results:

egressip-47032 was not applied to any egress node
% oc get egressip
NAME             EGRESSIPS    ASSIGNED NODE                          ASSIGNED EGRESSIPS
egressip-47032   10.0.1.166                                          
egressip-47034   10.0.1.181   huirwang-1128a-s6j6t-worker-westus-1   10.0.1.181

%  oc get cloudprivateipconfig                      
NAME         AGE
10.0.1.130   6m25s
10.0.1.138   6m34s
10.0.1.166   6m34s
10.0.1.181   6m25s
%  oc get cloudprivateipconfig  10.0.1.166  -o yaml
apiVersion: cloud.network.openshift.io/v1
kind: CloudPrivateIPConfig
metadata:
  annotations:
    k8s.ovn.org/egressip-owner-ref: egressip-47032
  creationTimestamp: "2022-11-28T10:27:37Z"
  finalizers:
  - cloudprivateipconfig.cloud.network.openshift.io/finalizer
  generation: 1
  name: 10.0.1.166
  resourceVersion: "87528"
  uid: 5221075a-35d0-4670-a6a7-ddfc6cbc700b
spec:
  node: huirwang-1128a-s6j6t-worker-westus-1
status:
  conditions:
  - lastTransitionTime: "2022-11-28T10:33:29Z"
    message: 'Error processing cloud assignment request, err: <nil>'
    observedGeneration: 1
    reason: CloudResponseError
    status: "False"
    type: Assigned
  node: huirwang-1128a-s6j6t-worker-westus-1
%  oc get cloudprivateipconfig  10.0.1.138  -o yaml 
apiVersion: cloud.network.openshift.io/v1
kind: CloudPrivateIPConfig
metadata:
  annotations:
    k8s.ovn.org/egressip-owner-ref: egressip-47032
  creationTimestamp: "2022-11-28T10:27:37Z"
  finalizers:
  - cloudprivateipconfig.cloud.network.openshift.io/finalizer
  generation: 1
  name: 10.0.1.138
  resourceVersion: "87523"
  uid: e4604e76-64d8-4735-87a2-eb50d28854cc
spec:
  node: huirwang-1128a-s6j6t-worker-westus-2
status:
  conditions:
  - lastTransitionTime: "2022-11-28T10:33:29Z"
    message: 'Error processing cloud assignment request, err: <nil>'
    observedGeneration: 1
    reason: CloudResponseError
    status: "False"
    type: Assigned
  node: huirwang-1128a-s6j6t-worker-westus-2

oc logs cloud-network-config-controller-6f7b994ddc-vhtbp  -n openshift-cloud-network-config-controller

.......
E1128 10:30:43.590807       1 controller.go:165] error syncing '10.0.1.138': error assigning CloudPrivateIPConfig: "10.0.1.138" to node: "huirwang-1128a-s6j6t-worker-westus-2", err: network.InterfacesClient#CreateOrUpdate: Failure sending request: StatusCode=0 -- Original Error: Code="InvalidRequestFormat" Message="Cannot parse the request." Details=[{"code":"DuplicateResourceName","message":"Resource /subscriptions//resourceGroups//providers/Microsoft.Network/networkInterfaces/ has two child resources with the same name (huirwang-1128a-s6j6t-worker-westus-2_10.0.1.138)."}], requeuing in cloud-private-ip-config workqueue
I1128 10:30:44.051422       1 cloudprivateipconfig_controller.go:271] CloudPrivateIPConfig: "10.0.1.166" will be added to node: "huirwang-1128a-s6j6t-worker-westus-1"
E1128 10:30:44.301259       1 controller.go:165] error syncing '10.0.1.166': error assigning CloudPrivateIPConfig: "10.0.1.166" to node: "huirwang-1128a-s6j6t-worker-westus-1", err: network.InterfacesClient#CreateOrUpdate: Failure sending request: StatusCode=0 -- Original Error: Code="InvalidRequestFormat" Message="Cannot parse the request." Details=[{"code":"DuplicateResourceName","message":"Resource /subscriptions//resourceGroups//providers/Microsoft.Network/networkInterfaces/ has two child resources with the same name (huirwang-1128a-s6j6t-worker-westus-1_10.0.1.166)."}], requeuing in cloud-private-ip-config workqueue
..........

Expected results:

EgressIP can be applied successfully.

Additional info:

• https://github.com/openshift/cloud-network-config-controller/pull/79
• https://github.com/openshift/ovn-kubernetes/pull/1404

This is a clone of issue OCPBUGS-5019. The following is the description of the original issue:
—
This is a clone of issue OCPBUGS-4941. The following is the description of the original issue:
—
Description of problem: This is a follow-up to OCPBUGS-3933.

The installer fails to destroy the cluster when the OpenStack object storage omits 'content-type' from responses, and a container is empty.

Version-Release number of selected component (if applicable):

4.8.z

How reproducible: