Back to index

4.11.51

Jump to: Complete Features | Incomplete Features | Complete Epics | Incomplete Epics | Other Complete | Other Incomplete |

Changes from 4.10.67

Note: this page shows the Feature-Based Change Log for a release

Complete Features

These features were completed when this image was assembled

Problem:

Certain Insights Advisor features differentiate between RHEL and OCP advisor

Goal:

Address top priority UI misalignments between RHEL and OCP advisor. Address UI features dropped from Insights ADvisor for OCP GA.

 

Scope:

Specific tasks and priority of them tracked in https://issues.redhat.com/browse/CCXDEV-7432

 
 
 
 

 

This contains all the Insights Advisor widget deliverables for the OCP release 4.11.

Scope
It covers only minor bug fixes and improvements:

  • better error handling during internal outages in data processing
  • add "last refresh" timestamp in the Advisor widget
Scenario: Check if the Insights Advisor widget in the OCP WebConsole UI shows the time of the last data analysis
Given: OCP WebConsole UI and the cluster dashboard is accessible
And: CCX external data pipeline is in a working state
And: administrator A1 has access to his cluster's dashboard
And: Insights Operator for this cluster is sending archives
When: administrator A1 clicks on the Insights Advisor widget
Then: the results of the last analysis are showed in the Insights Advisor widget
And: the time of the last analysis is shown in the Insights Advisor widget 

Acceptance criteria:

  1. The time of the last analysis is shown in the Insights Advisor widget for the scenario above
  2. The way it is presented is defined within the scope of https://issues.redhat.com/browse/CCXDEV-5869 (mockup task)
  3. The source of this timestamp must be a result of running the Prometheus metric (last archive upload time):
    max_over_time(timestamp(changes(insightsclient_request_send_total\{status_code="202"}[1m]) > 0)[24h:1m])

Show the error message (mocked in CCXDEV-5868) if the Prometheus metrics `cluster_operator_conditions{name="insights"}` contain two true conditions: UploadDegraded and Degraded at the same time. This state occurs if there was an IO archive upload error = problems with the pipeline.

Expected for 4.11 OCP release.

The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Epic Goal

  • Allow admin user to create new alerting rules, targeting metrics in any namespace
  • Allow cloning of existing rules to simplify rule creation
  • Allow creation of silences for existing alert rules

Why is this important?

  • Currently, any platform-related metrics (exposed in a openshift-, kube- and default namespace) cannot be used to form a new alerting rule. That makes it very difficult for administrators to enrich our out of the box experience for the OpenShift Container Platform with new rules that may be specific to their environments.
  • Additionally, we had requests from customer to allow modifications of our existing, out of the box alerting rules (for instance tweaking the alert expression or changing the severity label). Unfortunately, that is not easy since most rules come from several open source projects, or other OpenShift components, and any modifications would make a seamless upgrade not really seamless anymore. Imagine K8s changes metrics again (see 1.14) and we have to update our rules. We would not know what modifications have been done (even just the threshold might be difficult if upstream changes that as well) and we would not be able to upgrade these rules.

Scenarios

  • I'd like to modify the query expression of an existing rule (because the threshold value doesn't match with my environment).

Cloning the existing rule should end up with a new rule in the same namespace.
Modifications can now be done to the new rule.
(Optional) You can silence the existing rule.

  • I'd like to create a new rule based on a metric only available to an openshift-* namespace

Create a new PrometheusRule object inside the namespace that includes the metrics you need to form the alerting rule.

  • I'd like to update the label of an existing rule.

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • Ability to distinguish between rules deployed by us (CMO) and user created rules

Dependencies (internal and external)

Previous Work (Optional):

Open questions::

  1. Distinguish between operator-created rules and user-created rules
    Currently no such mechanism exists. This will need to be added to prometheus-operator or cluster-monitoring-operator.

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

CMO should reconcile the platform Prometheus configuration with the AlertingRule resources.

 

DoD

  • Alerts added via AlertingRule resources are evaluated by the Platform monitoring stack.

CMO should reconcile the platform Prometheus configuration with the alert-relabel-config resources.

 

DoD

  • Alerts changed via alert-relabel-configs are evaluated by the Platform monitoring stack.
  • Product alerts which are overriden aren't sent to Alertmanager

Managing PVs at scale for a fleet creates difficulties where "one size does not fit all". The ability for SRE to deploy prometheus with PVs and have retention based an on a desired size would enable easier management of these volumes across the fleet. 

 

The prometheus-operator exposes retentionSize.

Field Description
retentionSize Maximum amount of disk space used by blocks. Supported units: B, KB, MB, GB, TB, PB, EB. Ex: 512MB.

This is a feature request to enable this configuration option via CMO cluster-monitoring-config ConfigMap.

 

cc Simon Pasquier  

Epic Goal

  • Cluster admins want to configure the retention size for their metrics.

Why is this important?

  • While it is possible to define how long metrics should be retained on disk, it's not possible to tell the cluster monitoring operator how much data it should keep. For OSD/ROSA in particular, it would facilitate the management of the fleet if the retention size could be configured based on the persistent volume size because it would avoid issues with the storage getting full and monitoring being down when too many metrics are produced.

Scenarios

  • As a cluster admin, I want to define the maximum amount of data to be retained on the persistent volume.

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • The cluster-monitoring-config config and the user-workload-monitoring-config configmap allow to configure the retention size for
    • Prometheus (Platform and UWM)
    • Thanos Ruler (to be confirmed)
  • Proper validation is in place preventing bad user inputs from breaking the stack.

Dependencies (internal and external)

  1. Thanos ruler doesn't support retention size (only retention time).

Previous Work (Optional):

  1. None

Open questions::

  1. None

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

Problem Alignment

The Problem

Today, all configuration for setting individual, for example, routing configuration is done via a single configuration file that only admins have access to. If an environment uses multiple tenants and each tenant, for example, has different systems that they are using to notify teams in case of an issue, then someone needs to file a request w/ an admin to add the required settings.

That can be bothersome for individual teams, since requests like that usually disappear in the backlog of an administrator. At the same time, administrators might get tons of requests that they have to look at and prioritize, which takes them away from more crucial work.

We would like to introduce a more self service approach whereas individual teams can create their own configuration for their needs w/o the administrators involvement.

Last but not least, since Monitoring is deployed as a Core service of OpenShift there are multiple restrictions that the SRE team has to apply to all OSD and ROSA clusters. One restriction is the ability for customers to use the central Alertmanager that is owned and managed by the SRE team. They can't give access to the central managed secret due to security concerns so that users can add their own routing information.

High-Level Approach

Provide a new API (based on the Operator CRD approach) as part of the Prometheus Operator that allows creating a subset of the Alertmanager configuration without touching the central Alertmanager configuration file.

Please note that we do not plan to support additional individual webhooks with this work. Customers will need to deploy their own version of the third party webhooks.

Goal & Success

  • Allow users to deploy individual configurations that allow setting up Alertmanager for their needs without an administrator.

Solution Alignment

Key Capabilities

  • As an OpenShift administrator, I want to control who can CRUD individual configuration so that I can make sure that any unknown third person can touch the central Alertmanager instance shipped within OpenShift Monitoring.
  • As a team owner, I want to deploy a routing configuration to push notifications for alerts to my system of choice.

Key Flows

Team A wants to send all their important notifications to a specific Slack channel.

  • Administrator gives permission to Team A to allow creating a new configuration CR in their individual namespace.
  • Team A creates a new configuration CR.
  • Team A configures what alerts should go into their Slack channel.
  • Open Questions & Key Decisions (optional)
  • Do we want to improve anything inside the developer console to allow configuration?

Epic Goal

  • Allow users to manage Alertmanager for user-defined alerts and have the feature being fully supported.

Why is this important?

  • Users want to configure alert notifications without admin intervention.
  • The feature is currently Tech Preview, it should be generally available to benefit a bigger audience.

Scenarios

  1. As a cluster admin, I can deploy an Alertmanager service dedicated for user-defined alerts (e.g. separated from the existing  Alertmanager already used for platform alerts).
  2. As an application developer, I can silence alerts from the OCP console.
  3. As an application developer, I'm not allowed to configure invalid AlertmanagerConfig objects.

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • The AlertmanagerConfig CRD is v1beta1
  • The validating webhook service checking AlertmanagerConfig resources is highly-available.

Dependencies (internal and external)

  1. Prometheus operator upstream should migrate the AlertmanagerConfig CRD from v1alpha1 to v1beta1
  2. Console enhancements likely to be involved (see below).

Previous Work (Optional):

  1. Part of the feature is available as Tech Preview (MON-880).

Open questions:

  1. Coordination with the console team to support the Alertmanager service dedicated for user-defined alerts.
  2. Migration steps for users that are already using the v1alpha1 CRD.

Done Checklist

 * CI - CI is running, tests are automated and merged.
 * Release Enablement <link to Feature Enablement Presentation>
 * DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
 * DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
 * DEV - Downstream build attached to advisory: <link to errata>
 * QE - Test plans in Polarion: <link or reference to Polarion>
 * QE - Automated tests merged: <link or reference to automated tests>
 * DOC - Downstream documentation merged: <link to meaningful PR> 

 

Now that upstream supports AlertmanagerConfig v1beta1 (see MON-2290 and https://github.com/prometheus-operator/prometheus-operator/pull/4709), it should be deployed by CMO.

DoD:

  • Kubernetes API exposes and supports the v1beta1 version for AlertmanagerConfig CRD (in addition to v1alpha1).
  • Users can manage AlertmanagerConfig v1beta1 objects seamlessly.
  • AlertmanagerConfig v1beta1 objects are reconciled in the generated Alertmanager configuration.
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Epic Goal

  • The goal is to support metrics federation for user-defined monitoring via the /federate Prometheus endpoint (both from within and outside of the cluster).

Why is this important?

  • It is already possible to configure remote write for user-defined monitoring to push metrics outside of the cluster but in some cases, the network flow can only go from the outside to the cluster and not the opposite. This makes it impossible to leverage remote write.
  • It is already possible to use the /federate endpoint for the platform Prometheus (via the internal service or via the OpenShift route) so not supporting for UWM doesn't provide a consistent experience.
  • If we don't expose the /federate endpoint for the UWM Prometheus, users would have no supported way to store and query application metrics from a central location.

Scenarios

  1. As a cluster admin, I want to federate user-defined metrics using the Prometheus /federate endpoint.
  2. As a cluster admin, I want that the /federate endpoint to UWM is accessible via an OpenShift route.
  3. As a cluster admin, I want that the access to the /federate endpoint to UWM requires authentication (with bearer token only) & authorization (the required permissions should match the permissions on the /federate endpoint of the Platform Prometheus).

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • Documentation - information about the recommendations and limitations/caveats of the federation approach.
  • User can federate user-defined metrics from within the cluster
  • User can federate user-defined metrics from the outside via the OpenShift route.

Dependencies (internal and external)

  1. None

Previous Work (Optional):

  1. None

Open questions:

  1. None

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

DoD

  • User can federate UWM metrics within the cluster from the prometheus-user-workload.openshift-user-workload-monitoring.svc:9092 service
  • The service requires authentication via bearer token and authorization (same permissions as for federating platform metrics)

DoD

  • User can federate UWM metrics from outside of the cluster via the OpenShift route.
  • E2E test added to the CMO test suite.

Copy/paste from [_https://github.com/openshift-cs/managed-openshift/issues/60_]

Which service is this feature request for?
OpenShift Dedicated and Red Hat OpenShift Service on AWS

What are you trying to do?
Allow ROSA/OSD to integrate with AWS Managed Prometheus.

Describe the solution you'd like
Remote-write of metrics is supported in OpenShift but it does not work with AWS Managed Prometheus since AWS Managed Prometheus requires AWS SigV4 auth.

  • Note that Prometheus supports AWS SigV4 since v2.26 and OpenShift 4.9 uses v2.29.

Describe alternatives you've considered
There is the workaround to use the "AWS SigV4 Proxy" but I'd think this is not properly supported by RH.
https://mobb.ninja/docs/rosa/cluster-metrics-to-aws-prometheus/

Additional context
The customer wants to use an open and portable solution to centralize metrics storage and analysis. If they also deploy to other clouds, they don't want to have to re-configure. Since most clouds offer a Prometheus service (or it's easy to self-manage Prometheus), app migration should be simplified.

Epic Goal

The cluster monitoring operator should allow OpenShift customers to configure remote write with all authentication methods supported by upstream Prometheus.

We will extend CMO's configuration API to support the following authentications with remote write:

  • Sigv4
  • Authorization
  • OAuth2

Why is this important?

Customers want to send metrics to AWS Managed Prometheus that require sigv4 authentication (see https://docs.aws.amazon.com/prometheus/latest/userguide/AMP-secure-metric-ingestion.html#AMP-secure-auth).

Scenarios

  1. As a cluster admin, I want to forward platform/user metrics to remote write systems requiring Sigv4 authentication.
  2. As a cluster admin, I want to forward platform/user metrics to remote write systems requiring OAuth2 authentication.
  3. As a cluster admin, I want to forward platform/user metrics to remote write systems requiring custom Authorization header for authentication (e.g. API key).

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • It is possible for a cluster admin to configure any authentication method that is supported by Prometheus upstream for remote write (both platform and user-defined metrics):
    • Sigv4
    • Authorization
    • OAuth2

Dependencies (internal and external)

  • In theory none because everything is already supported by the Prometheus operator upstream. We may discover bugs in the upstream implementation though that may require upstream involvement.

Previous Work

  • After CMO started exposing the RemoteWrite specification in MON-1069, additional authentication options where added to prometheus and prometheus-operator but CMO didn't catch up on these.

Open Questions

  • None

Prometheus and Prometheus operator already support sigv4 authentication for remote write. This should be possible to configure the same in the CMO configuration:

 

apiVersion: v1
kind: ConfigMap
metadata:
  name: cluster-monitoring-config
  namespace: openshift-monitoring
data:
  config.yaml: |
    prometheusK8s:
      remoteWrite:
      - url: "https://remote-write.endpoint"
        sigv4:
          accessKey:
            name: aws-credentialss
            key: access
          secretKey:
            name: aws-credentials
            key: secret

          profile: "SomeProfile"

          roleArn: "SomeRoleArn"

DoD:

  • Ability to configure sigv4 authentication for remote write in the openshift-monitoring/cluster-monitoring-config configmap
  • Ability to configure sigv4 authentication for remote write in the openshift-user-workload-monitoring/user-workload-monitoring-config configmap

Prometheus and Prometheus operator already support custom Authorization for remote write. This should be possible to configure the same in the CMO configuration:

 

apiVersion: v1
kind: ConfigMap
metadata:
  name: cluster-monitoring-config
  namespace: openshift-monitoring
data:
  config.yaml: |
    prometheusK8s:
      remoteWrite:
      - url: "https://remote-write.endpoint"
        Authorization:
          type: Bearer
          credentials:
            name: credentials
            key: token

DoD:

  • Ability to configure custom Authorization for remote write in the openshift-monitoring/cluster-monitoring-config configmap
  • Ability to configure custom Authorization for remote write in the openshift-user-workload-monitoring/user-workload-monitoring-config configmap
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Description

As WMCO user, I want to make sure containerd logging information has been updated in documents and scripts.

Acceptance Criteria

  • update must-gather to collect containerd logs
  • Internal/Customer Documents and log collecting scripts must have containerd specific information (ex: location of logs). 

Summary (PM+lead)

Configure audit logging to capture login, logout and login failure details

Motivation (PM+lead)

TODO(PM): update this

Customer who needs login, logout and login failure details inside the openshift container platform.
I have checked for this on my test cluster but the audit logs do not contain any user name specifying login or logout details. For successful logins or logout, on CLI and openshift console as well we can see 'Login successful' or 'Invalid credentials'.

Expected results: Login, logout and login failures should be captured in audit logging.

Goals (lead)

  1. Login, logout and login failures should be captured in audit logs

Non-Goals (lead)

  1. Don't attempt to log login failures in the IdP login flow that goes beyond timeout, if it the information is not available in explicit oauth-server requests (e.g. github password login error).
  2. Logout does not involve oauth-server (but is a simple API object deletion in oauth-apiserver). Hence, the audit log discussed here won't include logout.

Deliverables

  1. Changes to oauth-server to log into /varLog/oauth-server/audit.log on the master node.
  2. Documentation

Proposal (lead)

The apiserver pods today have ´/var/log/<kube|oauth|openshift>-apiserver` mounted from the host and create audit files there using the upstream audit event format (JSON lines following https://github.com/kubernetes/apiserver/blob/92392ef22153d75b3645b0ae339f89c12767fb52/pkg/apis/audit/v1/types.go#L72). These events are apiserver specific, but as oauth authentication flow events are also requests, we can use the apiserver event format to log logins, login failures and logouts. Hence, we propose to make oauth-server to create /var/log/oauth-server/audit.log files on the master nodes using that format.

When the login flow does not finish within a certain time (e.g. 10min), we can artificially create an event to show a login failure in the audit logs.

User Stories (PM)

Dependencies (internal and external, lead)

Previous Work (lead)

Open questions (lead)

  1. ...

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

 

🏆 What

Let the Cluster Authentication Operator deliver the policy to OAuthServer.

💖 Why

In order to know if authn events should be logged, OAuthServer needs to be aware of it.

🗒 Notes

Create an observer to deliver the audit policy to the oauth server

Make the authentication-operator react to the new audit field in the oauth.config/cluster object. Write an observer watching this field, such an observer will translate the top-level configuration into oauth-server config and add it to the rest of the observed config.

* Stanislav Laznicka

OCP/Telco Definition of Done
Feature Template descriptions and documentation.

Feature Overview.

Early customer feedback is that they see SNO as a great solution covering smaller footprint deployment, but are wondering what is the evolution story OpenShift is going to provide where more capacity or high availability are needed in the future.

While migration tooling (moving workload/config to new cluster) could be a mid-term solution, customer desire is not to include extra hardware to be involved in this process.

 For Telecommunications Providers, at the Far Edge they intend to start small and then grow. Many of these operators will start with a SNO-based DU deployment as an initial investment, but as DUs evolve, different segments of the radio spectrum are added, various radio hardware is provisioned and features delivered to the Far Edge, the Telecommunication Providers desire the ability for their Far Edge deployments to scale up from 1 node to 2 nodes to n nodes. On the opposite side of the spectrum from SNO is MMIMO where there is a robust cluster and workloads use HPA.

Goals

  • Provide the capability to expand a single replica control plane topology to host more workloads capacity - add worker
  • Provide the capability to expand a single replica control plane to be a highly available control plane
  • To satisfy MMIMO Telecommunications providers will want the ability to scale a SNO to a multi-node cluster that can support HPA.
  • Telecommunications providers do not want workload (DU specifically) downtime when migrating from SNO to a multi-node cluster.
  • Telecommunications providers wish to be able to scale from one to two or more nodes to support a variety of radio hardware.
  • Support CP scaling (CP HA) for 2 node cluster, 3 node cluster and n node cluster. As the number of nodes in the cluster increases so does the failure domain of the cluster. The cluster is now supporting more cell sectors and therefore has more of a need for HA and resiliency including the cluster CP.

Requirements

  • TBD
Requirement Notes isMvp?
CI - MUST be running successfully with test automation This is a requirement for ALL features. YES
Release Technical Enablement Provide necessary release enablement details and documents. YES

(Optional) Use Cases

This Section:

  • Main success scenarios - high-level user stories
  • Alternate flow/scenarios - high-level user stories
  • ...

Questions to answer…

  • ...

Out of Scope

Background, and strategic fit

This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

  • ...

Customer Considerations

  • ...

Documentation Considerations

Questions to be addressed:

  • What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
  • Does this feature have doc impact?
  • New Content, Updates to existing content, Release Note, or No Doc Impact
  • If unsure and no Technical Writer is available, please contact Content Strategy.
  • What concepts do customers need to understand to be successful in [action]?
  • How do we expect customers will use the feature? For what purpose(s)?
  • What reference material might a customer want/need to complete [action]?
  • Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
  • What is the doc impact (New Content, Updates to existing content, or Release Note)?

Epic Goal

  • Documented and supported flow for adding 1, 2, 3 or more workers to a Single Node OpenShift (SNO) deployment without requiring cluster downtime and the understanding that this action will not make the cluster itself highly available.

Why is this important?

  • Telecommunications and Edge scenarios where HA is handled via failover to another site but single site capacity may vary or need to be expanded over time.
  • Similar scenarios exist for some ISV vendors where OpenShift is an implementation detail of how they deliver their solution on top of another platform (e.g. VMware).

Scenarios

  1. Adding a worker to a single node openshift cluster.
  2. Adding a second worker to a single node openshift cluster.
  3. Adding a third worker to a single node openshift cluster.
  4. Removing a worker node from a single node openshift cluster that has had 1 or more workers added.

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • Customer facing documentation of the add worker flow for SNO.

Dependencies (internal and external)

  1. ...

Previous Work (Optional):

Open questions::

  1. Presumably there is a scale limit on how many workers could be added to an SNO control plane, and it is lower than the limit for a "normal" 3 node control plane. It is not anticipated that this limit will be established in this epic. Intent is to focus on small scale sites where adding 1-3 worker nodes would be beneficial.

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

OCP/Telco Definition of Done
Epic Template descriptions and documentation.

<--- Cut-n-Paste the entire contents of this description into your new Epic --->

Epic Goal

  • Rebase OpenShift components to k8s v1.24

Why is this important?

  • Rebasing ensures components work with the upcoming release of Kubernetes
  • Address tech debt related to upstream deprecations and removals.

Scenarios

  1. ...

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • ...

Dependencies (internal and external)

  1. k8s 1.24 release

Previous Work (Optional):

Open questions::

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

Feature Overview

  • As an infrastructure owner, I want a repeatable method to quickly deploy the initial OpenShift cluster.
  • As an infrastructure owner, I want to install the first (management, hub, “cluster 0”) cluster to manage other (standalone, hub, spoke, hub of hubs) clusters.

Goals

  • Enable customers and partners to successfully deploy a single “first” cluster in disconnected, on-premises settings

Requirements

4.11 MVP Requirements

  • Customers and partners needs to be able to download the installer
  • Enable customers and partners to deploy a single “first” cluster (cluster 0) using single node, compact, or highly available topologies in disconnected, on-premises settings
  • Installer must support advanced network settings such as static IP assignments, VLANs and NIC bonding for on-premises metal use cases, as well as DHCP and PXE provisioning environments.
  • Installer needs to support automation, including integration with third-party deployment tools, as well as user-driven deployments.
  • In the MVP automation has higher priority than interactive, user-driven deployments.
  • For bare metal deployments, we cannot assume that users will provide us the credentials to manage hosts via their BMCs.
  • Installer should prioritize support for platforms None, baremetal, and VMware.
  • The installer will focus on a single version of OpenShift, and a different build artifact will be produced for each different version.
  • The installer must not depend on a connected registry; however, the installer can optionally use a previously mirrored registry within the disconnected environment.

Use Cases

  • As a Telco partner engineer (Site Engineer, Specialist, Field Engineer), I want to deploy an OpenShift cluster in production with limited or no additional hardware and don’t intend to deploy more OpenShift clusters [Isolated edge experience].
  • As a Enterprise infrastructure owner, I want to manage the lifecycle of multiple clusters in 1 or more sites by first installing the first  (management, hub, “cluster 0”) cluster to manage other (standalone, hub, spoke, hub of hubs) clusters [Cluster before your cluster].
  • As a Partner, I want to package OpenShift for large scale and/or distributed topology with my own software and/or hardware solution.
  • As a large enterprise customer or Service Provider, I want to install a “HyperShift Tugboat” OpenShift cluster in order to offer a hosted OpenShift control plane at scale to my consumers (DevOps Engineers, tenants) that allows for fleet-level provisioning for low CAPEX and OPEX, much like AKS or GKE [Hypershift].
  • As a new, novice to intermediate user (Enterprise Admin/Consumer, Telco Partner integrator, RH Solution Architect), I want to quickly deploy a small OpenShift cluster for Poc/Demo/Research purposes.

Questions to answer…

  •  

Out of Scope

Out of scope use cases (that are part of the Kubeframe/factory project):

  • As a Partner (OEMs, ISVs), I want to install and pre-configure OpenShift with my hardware/software in my disconnected factory, while allowing further (minimal) reconfiguration of a subset of capabilities later at a different site by different set of users (end customer) [Embedded OpenShift].
  • As an Infrastructure Admin at an Enterprise customer with multiple remote sites, I want to pre-provision OpenShift centrally prior to shipping and activating the clusters in remote sites.

Background, and strategic fit

  • This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

  1. The user has only access to the target nodes that will form the cluster and will boot them with the image presented locally via a USB stick. This scenario is common in sites with restricted access such as government infra where only users with security clearance can interact with the installation, where software is allowed to enter in the premises (in a USB, DVD, SD card, etc.) but never allowed to come back out. Users can't enter supporting devices such as laptops or phones.
  2. The user has access to the target nodes remotely to their BMCs (e.g. iDrac, iLo) and can map an image as virtual media from their computer. This scenario is common in data centers where the customer provides network access to the BMCs of the target nodes.
  3. We cannot assume that we will have access to a computer to run an installer or installer helper software.

Customer Considerations

  • ...

Documentation Considerations

Questions to be addressed:

  • What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
  • Does this feature have doc impact?
  • New Content, Updates to existing content, Release Note, or No Doc Impact
  • If unsure and no Technical Writer is available, please contact Content Strategy.
  • What concepts do customers need to understand to be successful in [action]?
  • How do we expect customers will use the feature? For what purpose(s)?
  • What reference material might a customer want/need to complete [action]?
  • Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
  • What is the doc impact (New Content, Updates to existing content, or Release Note)?

 

References

 

 

Epic Goal

  • As an OpenShift infrastructure owner, I need to be able to integrate the installation of my first on-premises OpenShift cluster with my automation flows and tools.
  • As an OpenShift infrastructure owner, I must be able to provide the CLI tool with manifests that contain the definition of the cluster I want to deploy
  • As an OpenShift Infrastructure owner, I must be able to get the validation errors in a programmatic way
  • As an OpenShift Infrastructure owner, I must be able to get the events and progress of the installation in a programmatic way
  • As an OpenShift Infrastructure owner, I must be able to retrieve the kubeconfig and OpenShift Console URL in a programmatic way

Why is this important?

  • When deploying clusters with a large number of hosts and when deploying many clusters, it is common to require to automate the installations.
  • Customers and partners usually use third party tools of their own to orchestrate the installation.
  • For Telco RAN deployments, Telco partners need to repeatably deploy multiple OpenShift clusters in parallel to multiple sites at-scale, with no human intervention.

Scenarios

  1. Monitoring flow:
    1. I generate all the manifests for the cluster,
    2. call the CLI tool pointint to the manifests path,
    3. Obtain the installation image from the nodes
    4. Use my infrastructure capabilities to boot the image on the target nodes
    5. Use the tool to connect to assisted service to get validation status and events
    6. Use the tool to retrieve credentials and URL for the deployed cluster

Acceptance Criteria

  • Backward compatibility between OCP releases with automation manifests (they can be applied to a newer version of OCP).
  • Installation progress and events can be tracked programatically
  • Validation errors can be obtained programatically
  • Kubeconfig and console URL can be obtained programatically
  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

References

User Story:

As a deployer, I want to be able to:

  • Get the credentials for the cluster that is going to be deployed

so that I can achieve

  • Checking the installed cluster for installation completion
  • Connect and administer the cluster that gets installed

 

Currently the Assisted Service generates the credentials by running the ignition generation step of the oepnshift-installer. This is why the credentials are only retrievable from the REST API towards the end of the installation.

In the BILLI usage, which takes down assisted service before the installation is complete there is no obvious point at which to alert the user that they should retrieve the credentials. This means that we either need to:

  • Allow the user to pass the admin key that will then get signed by the generated CA and replace the key that is made by openshift-installer (would mean new functionality in AI)
  • Allow the key to be retrieved by SSH with the fleeting command from the node0 (after it has generated). The command should be able to wait until it is possible
  • Have the possibility to POST it somewhere

Acceptance Criteria:

  • The admin key is generated and usable to check for installation completeness

This requires/does not require a design proposal.
This requires/does not require a feature gate.

Feature Overview

The AWS-specific code added in OCPPLAN-6006 needs to become GA and with this we want to introduce a couple of Day2 improvements.
Currently the AWS tags are defined and applied at installation time only and saved in the infrastructure CRD's status field for further operator use, which in turn just add the tags during creation.

Saving in the status field means it's not included in Velero backups, which is a crucial feature for customers and Day2.
Thus the status.resourceTags field should be deprecated in favour of a newly created spec.resourceTags with the same content. The installer should only populate the spec, consumers of the infrastructure CRD must favour the spec over the status definition if both are supplied, otherwise the status should be honored and a warning shall be issued.

Being part of the spec, the behaviour should also tag existing resources that do not have the tags yet and once the tags in the infrastructure CRD are changed all the AWS resources should be updated accordingly.

On AWS this can be done without re-creating any resources (the behaviour is basically an upsert by tag key) and is possible without service interruption as it is a metadata operation.

Tag deletes continue to be out of scope, as the customer can still have custom tags applied to the resources that we do not want to delete.

Due to the ongoing intree/out of tree split on the cloud and CSI providers, this should not apply to clusters with intree providers (!= "external").

Once confident we have all components updated, we should introduce an end2end test that makes sure we never create resources that are untagged.

After that, we can remove the experimental flag and make this a GA feature.

Goals

  • Inclusion in the cluster backups
  • Flexibility of changing tags during cluster lifetime, without recreating the whole cluster

Requirements

  • This Section:* A list of specific needs or objectives that a Feature must deliver to satisfy the Feature.. Some requirements will be flagged as MVP. If an MVP gets shifted, the feature shifts. If a non MVP requirement slips, it does not shift the feature.
Requirement Notes isMvp?
CI - MUST be running successfully with test automation This is a requirement for ALL features. YES
Release Technical Enablement Provide necessary release enablement details and documents. YES

List any affected packages or components.

  • Installer
  • Cluster Infrastructure
  • Storage
  • Node
  • NetworkEdge
  • Internal Registry
  • CCO

RFE-1101 described user defined tags for AWS resources provisioned by an OCP cluster. Currently user can define tags which are added to the resources during creation. These tags cannot be updated subsequently. The propagation of the tags is controlled using experimental flag. Before this feature goes GA we should define and implement a mechanism to exclude any experimental flags. Day2 operations and deletion of tags is not in the scope.

RFE-2012 aims to make the user-defined resource tags feature GA. This means that user defined tags should be updatable.

Currently the user-defined tags during install are passed directly as parameters of the Machine and Machineset resources for the master and worker. As a result these tags cannot be updated by consulting the Infrastructure resource of the cluster where the user defined tags are written.

The MCO should be changed such that during provisioning the MCO looks up the values of the tags in the Infrastructure resource and adds the tags during creation of the EC2 resources. The MCO should also watch the infrastructure resource for changes and when the resource tags are updated it should update the tags on the EC2 instances without restarts.

Acceptance Criteria:

  • e2e test where the ResourceTags are updated and then the test verifies that the tags on the ec2 instances are updated without restarts. now moved to CFE-179

Feature Overview  

Much like core OpenShift operators, a standardized flow exists for OLM-managed operators to interact with the cluster in a specific way to leverage AWS STS authorization when using AWS APIs as opposed to insecure static, long-lived credentials. OLM-managed operators can implement integration with the CloudCredentialOperator in well-defined way to support this flow.

Goals:

Enable customers to easily leverage OpenShift's capabilities around AWS STS with layered products, for increased security posture. Enable OLM-managed operators to implement support for this in well-defined pattern.

Requirements:

  • CCO gets a new mode in which it can reconcile STS credential request for OLM-managed operators
  • A standardized flow is leveraged to guide users in discovering and preparing their AWS IAM policies and roles with permissions that are required for OLM-managed operators 
  • A standardized flow is defined in which users can configure OLM-managed operators to leverage AWS STS
  • An example operator is used to demonstrate the end2end functionality
  • Clear instructions and documentation for operator development teams to implement the required interaction with the CloudCredentialOperator to support this flow

Use Cases:

See Operators & STS slide deck.

 

Out of Scope:

  • handling OLM-managed operator updates in which AWS IAM permission requirements might change from one version to another (which requires user awareness and intervention)

 

Background:

The CloudCredentialsOperator already provides a powerful API for OpenShift's cluster core operator to request credentials and acquire them via short-lived tokens. This capability should be expanded to OLM-managed operators, specifically to Red Hat layered products that interact with AWS APIs. The process today is cumbersome to none-existent based on the operator in question and seen as an adoption blocker of OpenShift on AWS.

 

Customer Considerations

This is particularly important for ROSA customers. Customers are expected to be asked to pre-create the required IAM roles outside of OpenShift, which is deemed acceptable.

Documentation Considerations

  • Internal documentation needs to exists to guide Red Hat operator developer teams on the requirements and proposed implementation of integration with CCO and the proposed flow
  • External documentation needs to exist to guide users on:
    • how to become aware that the cluster is in STS mode
    • how to become aware of operators that support STS and the proposed CCO flow
    • how to become aware of the IAM permissions requirements of these operators
    • how to configure an operator in the proposed flow to interact with CCO

Interoperability Considerations

  • this needs to work with ROSA
  • this needs to work with self-managed OCP on AWS

Market Problem

This Section: High-Level description of the Market Problem ie: Executive Summary

  • As a customer of OpenShift layered products, I need to be able to fluidly, reliably and consistently install and use OpenShift layered product Kubernetes Operators into my ROSA STS clusters, while keeping a STS workflow throughout.
  •  
  • As a customer of OpenShift on the big cloud providers, overall I expect OpenShift as a platform to function equally well with tokenized cloud auth as it does with "mint-mode" IAM credentials. I expect the same from the Kubernetes Operators under the Red Hat brand (that need to reach cloud APIs) in that tokenized workflows are equally integrated and workable as with "mint-mode" IAM credentials.
  •  
  • As the managed services, including Hypershift teams, offering a downstream opinionated, supported and managed lifecycle of OpenShift (in the forms of ROSA, ARO, OSD on GCP, Hypershift, etc), the OpenShift platform should have as close as possible, native integration with core platform operators when clusters use tokenized cloud auth, driving the use of layered products.
  • .
  • As the Hypershift team, where the only credential mode for clusters/customers is STS (on AWS) , the Red Hat branded Operators that must reach the AWS API, should be enabled to work with STS credentials in a consistent, and automated fashion that allows customer to use those operators as easily as possible, driving the use of layered products.

Why it Matters

  • Adding consistent, automated layered product integrations to OpenShift would provide great added value to OpenShift as a platform, and its downstream offerings in Managed Cloud Services and related offerings.
  • Enabling Kuberenetes Operators (at first, Red Hat ones) on OpenShift for the "big3" cloud providers is a key differentiation and security requirement that our customers have been and continue to demand.
  • HyperShift is an STS-only architecture, which means that if our layered offerings via Operators cannot easily work with STS, then it would be blocking us from our broad product adoption goals.

Illustrative User Stories or Scenarios

  1. Main success scenario - high-level user story
    1. customer creates a ROSA STS or Hypershift cluster (AWS)
    2. customer wants basic (table-stakes) features such as AWS EFS or RHODS or Logging
    3. customer sees necessary tasks for preparing for the operator in OperatorHub from their cluster
    4. customer prepares AWS IAM/STS roles/policies in anticipation of the Operator they want, using what they get from OperatorHub
    5. customer's provides a very minimal set of parameters (AWS ARN of role(s) with policy) to the Operator's OperatorHub page
    6. The cluster can automatically setup the Operator, using the provided tokenized credentials and the Operator functions as expected
    7. Cluster and Operator upgrades are taken into account and automated
    8. The above steps 1-7 should apply similarly for Google Cloud and Microsoft Azure Cloud, with their respective token-based workload identity systems.
  2. Alternate flow/scenarios - high-level user stories
    1. The same as above, but the ROSA CLI would assist with AWS role/policy management
    2. The same as above, but the oc CLI would assist with cloud role/policy management (per respective cloud provider for the cluster)
  3. ...

Expected Outcomes

This Section: Articulates and defines the value proposition from a users point of view

  • See SDE-1868 as an example of what is needed, including design proposed, for current-day ROSA STS and by extension Hypershift.
  • Further research is required to accomodate the AWS STS equivalent systems of GCP and Azure
  • Order of priority at this time is
    • 1. AWS STS for ROSA and ROSA via HyperShift
    • 2. Microsoft Azure for ARO
    • 3. Google Cloud for OpenShift Dedicated on GCP

Effect

This Section: Effect is the expected outcome within the market. There are two dimensions of outcomes; growth or retention. This represents part of the “why” statement for a feature.

  • Growth is the acquisition of net new usage of the platform. This can be new workloads not previously able to be supported, new markets not previously considered, or new end users not previously served.
  • Retention is maintaining and expanding existing use of the platform. This can be more effective use of tools, competitive pressures, and ease of use improvements.
  • Both of growth and retention are the effect of this effort.
    • Customers have strict requirements around using only token-based cloud credential systems for workloads in their cloud accounts, which include OpenShift clusters in all forms.
      • We gain new customers from both those that have waited for token-based auth/auth from OpenShift and from those that are new to OpenShift, with strict requirements around cloud account access
      • We retain customers that are going thru both cloud-native and hybrid-cloud journeys that all inevitably see security requirements driving them towards token-based auth/auth.
      •  

References

As an engineer I want the capability to implement CI test cases that run at different intervals, be it daily, weekly so as to ensure downstream operators that are dependent on certain capabilities are not negatively impacted if changes in systems CCO interacts with change behavior.

Acceptance Criteria:

Create a stubbed out e2e test path in CCO and matching e2e calling code in release such that there exists a path to tests that verify working in an AWS STS workflow.

Feature Overview

Customers are asking for improvements to the upgrade experience (both over-the-air and disconnected). This is a feature tracking epics required to get that work done.  

Goals

  1. Have an option to do upgrades in more discrete steps under admin control. Specifically, these steps are: 
    • Control plane upgrade
    • Worker nodes upgrade
    • Workload enabling upgrade (i..e. Router, other components) or infra nodes
  2. Better visibility into any errors during the upgrades and documentation of what they error means and how to recover. 
  3. An user experience around an end-2-end back-up and restore after a failed upgrade 
  4. OTA-810  - Better Documentation: 
    • Backup procedures before upgrades. 
    • More control over worker upgrades (with tagged pools between user Vs admin)
    • The kinds of pre-upgrade tests that are run, the errors that are flagged and what they mean and how to address them. 
    • Better explanation of each discrete step in upgrades, and what each CVO Operator is doing and potential errors, troubleshooting and mitigating actions.

References

OCP/Telco Definition of Done
Epic Template descriptions and documentation.

<--- Cut-n-Paste the entire contents of this description into your new Epic --->

Epic Goal

  • Provide a one click option to perform an upgrade which pauses all non master pools

Why is this important?

  • Customers are increasingly asking that the overall upgrade is broken up into more digestible pieces
  • This is the limit of what's possible today
    • R&D work will be done in the future to allow for further bucketing of upgrades into Control Plane, Worker Nodes, and Workload Enabling components (ie: router) That will however take much more consideration and rearchitecting

Scenarios

  1. An admin selecting their upgrade is offered two options "Upgrade Cluster" and "Upgrade Control Plane"
    1. If the admin selects Upgrade Cluster they get the pre 4.10 behavior
    2. If the admin selects Upgrade Control Plane all non master pools are paused and an upgrade is initiated
  1. A tooltip should clarify what the difference between the two are
  2. The pool progress bars should indicate pause/unpaused status, non master pools should allow for unpausing

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • ...

Dependencies (internal and external)

  1. ...

Previous Work (Optional):

  1. While this epic doesn't specifically target upgrading from 4.N to 4.N+1 to 4.N+2 with non master pools paused it would fundamentally enable that and it would simplify the UX described in Paused Worker Pool Upgrades

Open questions::

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

Goal
Add the ability to choose between a full cluster upgrade (which exists today) or control plane upgrade (which will pause all worker pools) in the console.

Background
Currently in the console, users only have the ability to complete a full cluster upgrade. For many customers, upgrades take longer than what their maintenance window allows. Users need the ability to upgrade the control plane independently of the other worker nodes. 

Ex. Upgrades of huge clusters may take too long so admins may do the control plane this weekend, worker-pool-A next weekend, worker-pool-B the weekend after, etc.  It is all at a pool level, they will not be able to choose specific hosts.

Requirements

  1. Changes to the Update modal:
    1. Add the ability to choose between a cluster upgrade and a control plane upgrade (the design does not default to a selection but rather disables the update button to force the user to make a conscious decision)
    2. link out to documentation to learn more about update strategies
  2. Changes to the in progress check list:
    1. Add a status above the worker pool section to let users know that all worker pools are paused and an action to resume all updates
    2. Add a "resume update" button for each worker pool entry
  3. Changes to the update status:
    1. When all master pools are updated successfully, change the status from what we have today "Up to date" to something like "Control plane up to date - all worker pools paused"
  4. Add an inline alert that lets users know there is a 60 day window to update all worker pools. In the alert, include the sentiment that worker pools can remain paused as long as is normally safe, which means until certificate rotation becomes critical which is at about 60 days. The admin would be advised to unpause them in order to complete the full upgrade. If the MCPs are paused, the certification rotation does not happen, which causes the cluster to become degraded and causes failure in multiple 'oc' commands, including but not limited to 'oc debug', 'oc logs', 'oc exec' and 'oc attach'. (Are we missing anything else here?) Inline alert logic:
    1. From day 60 to day 10 use the default alert.
    2. From day 10 to day 3 use the warning alert.
    3. From day 3 to 0 use the critical alert and continue to persist until resolved.

Design deliverables: 

Goal
Improve the UX on the machine config pool page to reflect the new enhancements on the cluster settings that allows users to select the ability to update the control plane only.

Background
Currently in the console, users only have the ability to complete a full cluster upgrade. For many customers, upgrades take longer than what their maintenance window allows. Users need the ability to upgrade the control plane independently of the other worker nodes. 

Ex. Upgrades of huge clusters may take too long so admins may do the control plane this weekend, worker-pool-A next weekend, worker-pool-B the weekend after, etc.  It is all at a pool level, they will not be able to choose specific hosts.

Requirements

  1. Changes to the table:
    1. Remove "Updated, updating and paused" columns. We could also consider adding column management to this table and hide those columns by default.
    2. Add "Update status" as a column, and surface the same status on cluster settings. Not true or false values but instead updating, paused, and up to date.
    3. Surface the update action in the table row.
  2. Add an inline alert that lets users know there is a 60 day window to update all worker pools. In the alert, include the sentiment that worker pools can remain paused as long as is normally safe, which means until certificate rotation becomes critical which is at about 60 days. The admin would be advised to unpause them in order to complete the full upgrade. If the MCPs are paused, the certification rotation does not happen, which causes the cluster to become degraded and causes failure in multiple 'oc' commands, including but not limited to 'oc debug', 'oc logs', 'oc exec' and 'oc attach'. (Are we missing anything else here?) Add the same alert logic to this page as the cluster settings:
    1. From day 60 to day 10 use the default inline alert.
    2. From day 10 to day 3 use the warning inline alert.
    3. From day 3 to 0 use the critical alert and continue to persist until resolved.

Design deliverables: 

OCP/Telco Definition of Done
Feature Template descriptions and documentation.
<--- Cut-n-Paste the entire contents of this description into your new Feature --->
<--- Remove the descriptive text as appropriate --->

Feature Overview

  • As RH OpenShift Product Owners, we want to enable new providers/platforms/service with varying levels of capabilities and integration with minimal reliance on OpenShift Engineering.
  • As a new provider/platform partner, I want to enable my solution (hardware and/or software) with OpenShift with minimal effort.

 

Problem

  • It is currently challenging for us to enable new platforms / providers without taking the heavy burden on doing the platform specific development ourselves.

Goals

  • We want to enable the long-tail new platforms/providers to expand our reach into new markets and/or support new use cases.
  • We want to remove strict dependencies we have on Engineering teams to review, support and test new providers.
  • We want to lower the effort required for onboarding new platforms/providers.
  • We want to enable new platform/providers to self-certify.
  • We want to define tiered model for provider/platform integration that delineates ownership and responsibilities throughout new provider/platform development lifecycle and support model.
  • We want to reduce time to onboard new provider/platform – ideally to a single release.
  • We want to maintain consistent customer experience across all providers/platforms.

Requirements

  • Step-by-step guide on how to add a new platform/provider for each tier
  • Certification tool for partner to self-certify
  • Certification tool results for (at least) each Y/minor release submitted by partner to Red Hat for acknowledgement
  • DCI program to enable partners to run CI with OpenShift on their platform
  • Well documented, accessible, and up-to-date test suites for providing the test coverage of the partner
  • CI includes upgrade testing of OpenShift with partner's components
  • Partner component upgrade failure should not block OpenShift upgrade
  • Partner code is available in repositories in the openshift org on github with an open source license compatible with OpenShift

 

Requirement Notes isMvp?
CI - MUST be running successfully with test automation This is a requirement for ALL features. YES
Release Technical Enablement Provide necessary release enablement details and documents. YES

(Optional) Use Cases

This Section:

  • Main success scenarios - high-level user stories
  • Alternate flow/scenarios - high-level user stories
  • ...

Questions to answer…

  • ...

Out of Scope

Background, and strategic fit

This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

Assumptions

  • ...

Customer Considerations

  • ...

Documentation Considerations

Questions to be addressed:

  • What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
  • Does this feature have doc impact?
  • New Content, Updates to existing content, Release Note, or No Doc Impact
  • If unsure and no Technical Writer is available, please contact Content Strategy.
  • What concepts do customers need to understand to be successful in [action]?
  • How do we expect customers will use the feature? For what purpose(s)?
  • What reference material might a customer want/need to complete [action]?
  • Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
  • What is the doc impact (New Content, Updates to existing content, or Release Note)?

 

References

The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Running the OPCT with the latest version (v0.1.0) on OCP 4.11.0, the openshift-tests is reporting an incorrect counter for the "total" field.

In the example below, after the 1127th test, the total follows the same counter of executed. I also would assume that the total is incorrect before that point as the test continues the execution increases both counters.

 

openshift-tests output format: [failed/executed/total]

started: (0/1126/1127) "[sig-storage] PersistentVolumes-expansion  loopback local block volume should support online expansion on node [Suite:openshift/conformance/parallel] [Suite:k8s]"

passed: (38s) 2022-08-09T17:12:21 "[sig-storage] In-tree Volumes [Driver: nfs] [Testpattern: Dynamic PV (default fs)] provisioning should provision storage with mount options [Suite:openshift/conformance/parallel] [Suite:k8s]"

started: (0/1127/1127) "[sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: tmpfs] [Testpattern: Generic Ephemeral-volume (block volmode) (late-binding)] ephemeral should support two pods which have the same volume definition [Suite:openshift/conformance/parallel] [Suite:k8s]"

passed: (6.6s) 2022-08-09T17:12:21 "[sig-storage] Downward API volume should provide container's memory request [NodeConformance] [Conformance] [Suite:openshift/conformance/parallel/minimal] [Suite:k8s]"

started: (0/1128/1128) "[sig-storage] In-tree Volumes [Driver: cinder] [Testpattern: Dynamic PV (immediate binding)] topology should fail to schedule a pod which has topologies that conflict with AllowedTopologies [Suite:openshift/conformance/parallel] [Suite:k8s]"

skip [k8s.io/kubernetes@v1.24.0/test/e2e/storage/framework/testsuite.go:116]: Driver local doesn't support GenericEphemeralVolume -- skipping
Ginkgo exit error 3: exit with code 3

skipped: (400ms) 2022-08-09T17:12:21 "[sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: tmpfs] [Testpattern: Generic Ephemeral-volume (block volmode) (late-binding)] ephemeral should support two pods which have the same volume definition [Suite:openshift/conformance/parallel] [Suite:k8s]"

started: (0/1129/1129) "[sig-storage] In-tree Volumes [Driver: emptydir] [Testpattern: Dynamic PV (default fs)] capacity provides storage capacity information [Suite:openshift/conformance/parallel] [Suite:k8s]" 

 

OPCT output format [executed/total (failed failures)]

Tue, 09 Aug 2022 14:12:13 -03> Global Status: running
JOB_NAME                         | STATUS     | RESULTS    | PROGRESS                  | MESSAGE                                           
openshift-conformance-validated  | running    |            | 1112/1127 (0 failures)    | status=running                                    
openshift-kube-conformance       | complete   |            | 352/352 (0 failures)      | waiting for post-processor...                     
Tue, 09 Aug 2022 14:12:23 -03> Global Status: running
JOB_NAME                         | STATUS     | RESULTS    | PROGRESS                  | MESSAGE                                           
openshift-conformance-validated  | running    |            | 1120/1127 (0 failures)    | status=running                                    
openshift-kube-conformance       | complete   |            | 352/352 (0 failures)      | waiting for post-processor...                     
Tue, 09 Aug 2022 14:12:33 -03> Global Status: running
JOB_NAME                         | STATUS     | RESULTS    | PROGRESS                  | MESSAGE                                           
openshift-conformance-validated  | running    |            | 1139/1139 (0 failures)    | status=running                                    
openshift-kube-conformance       | complete   |            | 352/352 (0 failures)      | waiting for post-processor...                     
Tue, 09 Aug 2022 14:12:43 -03> Global Status: running
JOB_NAME                         | STATUS     | RESULTS    | PROGRESS                  | MESSAGE                                           
openshift-conformance-validated  | running    |            | 1185/1185 (0 failures)    | status=running                                    
openshift-kube-conformance       | complete   |            | 352/352 (0 failures)      | waiting for post-processor...                     
Tue, 09 Aug 2022 14:12:53 -03> Global Status: running
JOB_NAME                         | STATUS     | RESULTS    | PROGRESS                  | MESSAGE                                           
openshift-conformance-validated  | running    |            | 1188/1188 (0 failures)    | status=running                                    
openshift-kube-conformance       | complete   |            | 352/352 (0 failures)      | waiting for post-processor...      

 

 

 

 

Goal

Increase integration of Shipwright, Tekton, Argo CD in OpenShift GitOps with OpenShift platform and related products such as ACM.

Incomplete Features

When this image was assembled, these features were not yet completed. Therefore, only the Jira Cards included here are part of this release

Feature Overview

We drive OpenShift cross-market customer success and new customer adoption with constant improvements and feature additions to the existing capabilities of our OpenShift Core Networking (SDN and Network Edge). This feature captures that natural progression of the product.

Goals

  • Feature enhancements (performance, scale, configuration, UX, ...)
  • Modernization (incorporation and productization of new technologies)

Requirements

  • Core Networking Stability
  • Core Networking Performance and Scale
  • Core Neworking Extensibility (Multus CNIs)
  • Core Networking UX (Observability)
  • Core Networking Security and Compliance

In Scope

  • Network Edge (ingress, DNS, LB)
  • SDN (CNI plugins, openshift-sdn, OVN, network policy, egressIP, egress Router, ...)
  • Networking Observability

Out of Scope

There are definitely grey areas, but in general:

  • CNV
  • Service Mesh
  • CNF

Documentation Considerations

Questions to be addressed:

  • What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
  • Does this feature have doc impact?
  • New Content, Updates to existing content, Release Note, or No Doc Impact
  • If unsure and no Technical Writer is available, please contact Content Strategy.
  • What concepts do customers need to understand to be successful in [action]?
  • How do we expect customers will use the feature? For what purpose(s)?
  • What reference material might a customer want/need to complete [action]?
  • Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
  • What is the doc impact (New Content, Updates to existing content, or Release Note)?
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

User Story: As a customer in a highly regulated environment, I need the ability to secure DNS traffic when forwarding requests to upstream resolvers so that I can ensure additional DNS traffic and data privacy.

The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Create a PR in openshift/cluster-ingress-operator to implement configurable router probe timeouts.

The PR should include the following:

  • Changes to the ingress operator's ingress controller to allow the user to configure the readiness and liveness probe's timeoutSeconds values.
  • Changes to existing unit tests to verify that the new functionality works properly.
  • Write E2E test to verify that the new functionality works properly.

tldr: three basic claims, the rest is explanation and one example

  1. We cannot improve long term maintainability solely by fixing bugs.
  2. Teams should be asked to produce designs for improving maintainability/debugability.
  3. Specific maintenance items (or investigation of maintenance items), should be placed into planning as peer to PM requests and explicitly prioritized against them.

While bugs are an important metric, fixing bugs is different than investing in maintainability and debugability. Investing in fixing bugs will help alleviate immediate problems, but doesn't improve the ability to address future problems. You (may) get a code base with fewer bugs, but when you add a new feature, it will still be hard to debug problems and interactions. This pushes a code base towards stagnation where it gets harder and harder to add features.

One alternative is to ask teams to produce ideas for how they would improve future maintainability and debugability instead of focusing on immediate bugs. This would produce designs that make problem determination, bug resolution, and future feature additions faster over time.

I have a concrete example of one such outcome of focusing on bugs vs quality. We have resolved many bugs about communication failures with ingress by finding problems with point-to-point network communication. We have fixed the individual bugs, but have not improved the code for future debugging. In so doing, we chase many hard to diagnose problem across the stack. The alternative is to create a point-to-point network connectivity capability. this would immediately improve bug resolution and stability (detection) for kuryr, ovs, legacy sdn, network-edge, kube-apiserver, openshift-apiserver, authentication, and console. Bug fixing does not produce the same impact.

We need more investment in our future selves. Saying, "teams should reserve this" doesn't seem to be universally effective. Perhaps an approach that directly asks for designs and impacts and then follows up by placing the items directly in planning and prioritizing against PM feature requests would give teams the confidence to invest in these areas and give broad exposure to systemic problems.


Relevant links:

Per the 4.6.30 Monitoring DNS Post Mortem, we should add E2E tests to openshift/cluster-dns-operator to reduce the risk that changes to our CoreDNS configuration break DNS resolution for clients.  

To begin with, we add E2E DNS testing for 2 or 3 client libraries to establish a framework for testing DNS resolvers; the work of adding additional client libraries to this framework can be left for follow-up stories.  Two common libraries are Go's resolver and glibc's resolver.  A somewhat common library that is known to have quirks is musl libc's resolver, which uses a shorter timeout value than glibc's resolver and reportedly has issues with the EDNS0 protocol extension.  It would also make sense to test Java or other popular languages or runtimes that have their own resolvers. 

Additionally, as talked about in our DNS Issue Retro & Testing Coverage meeting on Feb 28th 2024, we also decided to add a test for testing a non-EDNS0 query for a larger than 512 byte record, as once was an issue in bug OCPBUGS-27397.   

The ultimate goal is that the test will inform us when a change to OpenShift's DNS or networking has an effect that may impact end-user applications. 

In OCP 4.8 the router was changed to use the "random" balancing algorithm for non-passthrough routes by default. It was previously "leastconn".

Bug https://bugzilla.redhat.com/show_bug.cgi?id=2007581 shows that using "random" by default incurs significant memory overhead for each backend that uses it.

PR https://github.com/openshift/cluster-ingress-operator/pull/663
reverted the change and made "leastconn" the default again (OCP 4.8 onwards).

The analysis in https://bugzilla.redhat.com/show_bug.cgi?id=2007581#c40 shows that the default haproxy behaviour is to multiply the weight (specified in the route CR) by 16 as it builds its data structures for each backend. If no weight is specified then openshift-router sets the weight to 256. If you have many, many thousands of routes then this balloons quickly and leads to a significant increase in memory usage, as highlighted by customer cases attached to BZ#2007581.

The purpose of this issue is to both explore changing the openshift-router default weight (i.e., 256) to something smaller, or indeed unset (assuming no explicit weight has been requested), and to measure the memory usage within the context of the existing perf&scale tests that we use for vetting new haproxy releases.

It may be that the low-hanging change is to not default to weight=256 for backends that only have one pod replica (i.e., if no value specified, and there is only 1 pod replica, then don't default to 256 for that single server entry).

Outcome: does changing the [default] weight value make it feasible to switch back to "random" as the default balancing algorithm for a future OCP release.

Revert router to using "random" once again in 4.11 once analysis is done on impact of weight and static memory allocation.

Feature Overview

  • This Section:* High-Level description of the feature ie: Executive Summary
  • Note: A Feature is a capability or a well defined set of functionality that delivers business value. Features can include additions or changes to existing functionality. Features can easily span multiple teams, and multiple releases.

 

Goals

  • This Section:* Provide high-level goal statement, providing user context and expected user outcome(s) for this feature

 

Requirements

  • This Section:* A list of specific needs or objectives that a Feature must deliver to satisfy the Feature.. Some requirements will be flagged as MVP. If an MVP gets shifted, the feature shifts. If a non MVP requirement slips, it does not shift the feature.

 

Requirement Notes isMvp?
CI - MUST be running successfully with test automation This is a requirement for ALL features. YES
Release Technical Enablement Provide necessary release enablement details and documents. YES

 

(Optional) Use Cases

This Section: 

  • Main success scenarios - high-level user stories
  • Alternate flow/scenarios - high-level user stories
  • ...

 

Questions to answer…

  • ...

 

Out of Scope

 

Background, and strategic fit

This Section: What does the person writing code, testing, documenting need to know? What context can be provided to frame this feature.

 

Assumptions

  • ...

 

Customer Considerations

  • ...

 

Documentation Considerations

Questions to be addressed:

  • What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
  • Does this feature have doc impact?  
  • New Content, Updates to existing content,  Release Note, or No Doc Impact
  • If unsure and no Technical Writer is available, please contact Content Strategy.
  • What concepts do customers need to understand to be successful in [action]?
  • How do we expect customers will use the feature? For what purpose(s)?
  • What reference material might a customer want/need to complete [action]?
  • Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
  • What is the doc impact (New Content, Updates to existing content, or Release Note)?
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

During master nodes upgrade when nodes are getting drained there's currently no protection from two or more operands going down. If your component is required to be available during upgrade or other voluntary disruptions, please consider deploying PDB to protect your operands.

The effort is tracked in https://issues.redhat.com/browse/WRKLDS-293.

Example:

 

Acceptance Criteria:
1. Create PDB controller in console-operator for both console and downloads pods
2. Add e2e tests for PDB in single node and multi node cluster

 

Note: We should consider to backport this to 4.10

Goal
Add support for PDB (Pod Disruption Budget) to the console.

Requirements:

  • Add a list, detail, and yaml view (with samples) for PDBs. In addition, update the workloads page to support PDBs as well.
  • For the PBD list page include a table with name, namespace, selector, availability, allowed disruptions and created. In addition, to the table provide the main call to action to create a PDB.
  • For the PDB details page provide a Details, YAML and Pods tab. The Pods tab will include a list pods associated with the PBD - make sure to surface the owner column.
  • When users create a PDB from the list page, take them to the YAML and provide samples to enhance the creation experience. Sample 1: Set max unavailable to 0, Sample 2: Set min unavailable to 25% (confirming samples with stakeholders). In the case that a PDB has already been applied, warn users that it is not recommended to add another. Cover use cases as well that keep users from creating poor policies - for example, setting the minimum available to zero.
  • Add the ability to add/edit/view PBDs on a workload. If we edit a PDB applied to multiple workloads, warn users that this change will affect all workloads and not only the one they are currently editing. When a PDB has been applied, add a new filed to the details page with a link to the PDB and policy.

Designs:

Samuel Padgett Colleen Hart

When viewing the Installed Operators list set to 'All projects' and then selecting an operator that is available in 'All namespaces' (globally installed,) upon clicking the operator to view its details the user is taken into the details of that operator in installed namespace (project selector will switch to the install namespace.)

This can be disorienting then to look at the lists of custom resource instances and see them all blank, since the lists are showing instances only in the currently selected project (the install namespace) and not across all namespaces the operator is available in.

It is likely that making use of the new Operator resource will improve this experience (CONSOLE-2240,) though that may still be some releases away. it should be considered if it's worth a "short term" fix in the meantime.

Note: The informational alert was not implemented. It was decided that since "All namespaces" is displayed in the radio button, the alert was not needed.

Feature Overview

Enable sharing ConfigMap and Secret across namespaces

Requirements

Requirement Notes isMvp?
Secrets and ConfigMaps can get shared across namespaces   YES

Questions to answer…

NA

Out of Scope

NA

Background, and strategic fit

Consumption of RHEL entitlements has been a challenge on OCP 4 since it moved to a cluster-based entitlement model compared to the node-based (RHEL subscription manager) entitlement mode. In order to provide a sufficiently similar experience to OCP 3, the entitlement certificates that are made available on the cluster (OCPBU-93) should be shared across namespaces in order to prevent the need for cluster admin to copy these entitlements in each namespace which leads to additional operational challenges for updating and refreshing them. 

Documentation Considerations

Questions to be addressed:
 * What educational or reference material (docs) is required to support this product feature? For users/admins? Other functions (security officers, etc)?
 * Does this feature have doc impact?
 * New Content, Updates to existing content, Release Note, or No Doc Impact
 * If unsure and no Technical Writer is available, please contact Content Strategy.
 * What concepts do customers need to understand to be successful in [action]?
 * How do we expect customers will use the feature? For what purpose(s)?
 * What reference material might a customer want/need to complete [action]?
 * Is there source material that can be used as reference for the Technical Writer in writing the content? If yes, please link if available.
 * What is the doc impact (New Content, Updates to existing content, or Release Note)?

OCP/Telco Definition of Done
Epic Template descriptions and documentation.

<--- Cut-n-Paste the entire contents of this description into your new Epic --->

Epic Goal

  • Require volumes that use the Shared Resources CSI driver to specify readOnly: true in order to create the pod
  • Reserve the "openshift-" prefix for SharedSecrets and SharedConfigMaps, such that these resources can only be created by OpenShift operators. We must do this while the driver is tech preview.

Why is this important?

  • readOnly: true must be specified in order for the driver to mount the volume correctly. If this is not set, the volume mount is rejected and the pod will be stuck in a Pending/Initializing state.
  • A validating admission webhook will ensure that the pods won't be created in such a state, improving user experience.
  • Openshift operators may want/need to create SharedSecrets and SharedConfigMaps so they can be used as system level resources. For example, Insights Operator can automatically create a SharedSecret for the Simple Content Access cert.

Scenarios

  1. As a developer, I want to consume shared Secrets and ConfigMaps in my workloads so that I can have access to shared credentials and configuration.
  2. As a cluster admin, I want the Insights operator to automatically create a SharedSecret for my cluster's simple content access certificate.
  3. As a cluster admin/SRE, I want OpenShift to use SharedConfigMaps to distribute cluster certificate authorities so that data is not duplicated in ConfigMaps across my cluster.

Acceptance Criteria

  • Pods must have readOnly: true set to use the shared resource CSI Driver - admission should be rejected if this is not set.
  • Documentation updated to reflect this requirement.
  • Users (admins?) are not allowed to create SharedSecrets or SharedConfigMaps with the "openshift-" prefix.

Dependencies (internal and external)

  1. ART - to create payload image for the webhook
  2. Arch review for the enhancement proposal (Apiserver/control plane team)

Previous Work (Optional):

  1. BUILD-293 - Shared Resources tech preview

Open questions::

  1. From email exchange with David Eads:  "Thinking ahead to how we'd like to use this in builds once we're GA, are we likely to choose openshift-etc-pki-entitlement as one of our well-known names?  If we do, what sort of validation (if any) would we like to provide on the backing secret and does that require any new infrastructure?"

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

User Story

As a developer using SharedSecrets and ConfigMaps
I want to ensure all pods set readOnly; true on admission
So that I don't have pods stuck in the "Pending" state because of a bad volume mount

Acceptance Criteria

  • Pods which reference the Shared Resource CSI driver must set readOnly: true on admission.
  • If readOnly: true is not set, or is set to false, the pod should not be created.
  • Appropriate testing in place to verify behavior

QE Impact

QE will need to verify the new Pod Admission behavior

Docs Impact

Docs will need to ensure that readOnly: true is required and must be set to true.

PX Impact

None.

QE testing/verification of the feature - require readOnly to be true

Actions:

1. Create smoke test and submit to GitHub
2. Run script to integrate smoke test with Polarion

User Story

As an OpenShift engineer,
I want to initialize a validating admission webhook for the shared resource CSI driver
So that I can eventually require readOnly: true to be set on all pods that use the Shared Resource CSI Driver

Acceptance Criteria

  • Container image created in CI which builds a "hello world" binary for the future validating webhook.
  • ART sets up downstream build process for the image.

QE Impact

None.

Docs Impact

None.

PX Impact

None.

Notes

This is a prerequisite for implementing the validating admission webhook.
We need to have ART build the container image downstream so that we can add the correct image references for the CVO.
If we reference images in the CVO manifests which do not have downstream counterparts, we break the downstream build for the payload.

CI is capable of producing multiple images for a GitHub repository. For example, github.com/openshift/oc produces 4-5 images with various capabilities.

We did similar work in BUILD-234 - some of these steps are not required.

See also:

User Story

As an OpenShift engineer
I want the shared resource CSI Driver webhook to be installed with the cluster storage operator
So that the webhook is deployed when the CSI driver is deployed

Acceptance Criteria

  • Shared Resource CSI Driver operator deploys the webhook alongside the CSI driver
  • Cluster storage operator is updated if needed to deploy the shared resource CSI driver webhook.

Docs Impact

None - no new functional capabilities will be added

QE Impact

None - we can verify in CI that we are deploying the webhook correctly.

PX Impact

None - no new functional capabilities will be added

Notes

The scope of this story is to just deploy the "hello world" webhook with the Cluster Storage Operator.
Adding the live ValidatingWebhook configuration and service will be done in a separate story.

Complete Epics

This section includes Jira cards that are linked to an Epic, but the Epic itself is not linked to any Feature. These epics were completed when this image was assembled

Summary (PM+lead)

https://issues.redhat.com/browse/AUTH-2 revealed that, in prinicipal, Pod Security Admission is possible to integrate into OpenShift while retaining SCC functionality.

 

This epic is about the concrete steps to enable Pod Security Admission by default in OpenShift

Motivation (PM+lead)

Goals (lead)

  • Enable Pod Security Admission in "restricted" policy level by default
  • Migrate existing core workloads to comply to the "restricted" pod security policy level

Non-Goals (lead)

  • Other OpenShift workloads must be migrated by the individual responsible teams.

Deliverables

Proposal (lead)

Enhancement - https://github.com/openshift/enhancements/pull/1010

User Stories (PM)

Dependencies (internal and external, lead)

Previous Work (lead)

Open questions (lead)

  1. ...

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

dns-operator must comply to restricted pod security level. The current audit warning is:

{   "objectRef": "openshift-dns-operator/deployments/dns-operator",   "pod-security.kubernetes.io/audit-violations": "would violate PodSecurity \"restricted:latest\": allowPrivilegeEscalation != false (containers \"dns-operator\", \"kube-rbac-proxy\" must set securityContext.allowPrivilegeEscalation=false), unre stricted capabilities (containers \"dns-operator\", \"kube-rbac-proxy\" must set securityContext.capabilities.drop=[\"ALL\"]), runAsNonRoot != true (pod or containers \"dns-operator\", \"kube-rbac-proxy\" must set securityContext.runAsNonRoot=tr ue), seccompProfile (pod or containers \"dns-operator\", \"kube-rbac-proxy\" must set securityContext.seccompProfile.type to \"RuntimeDefault\" or \"Localhost\")" }

ingress-operator must comply to pod security. The current audit warning is:

 

{   "objectRef": "openshift-ingress-operator/deployments/ingress-operator",   "pod-security.kubernetes.io/audit-violations": "would violate PodSecurity \"restricted:latest\": allowPrivilegeEscalation != false (containers \"ingress-operator\", \"kube-rbac-proxy\" must set securityContext.allowPrivilegeEscalation=false), unrestricted capabilities (containers \"ingress-operator\", \"kube-rbac-proxy\" must set securityContext.capabilities.drop=[\"ALL\"]), runAsNonRoot != true (pod or containers \"ingress-operator\", \"kube-rbac-proxy\" must set securityContext.run AsNonRoot=true), seccompProfile (pod or containers \"ingress-operator\", \"kube-rbac-proxy\" must set securityContext.seccompProfile.type to \"RuntimeDefault\" or \"Localhost\")" }

Epic Goal

HyperShift provisions OpenShift clusters with externally managed control-planes. It follows a slightly different process for provisioning clusters. For example, HyperShift uses cluster API as a backend and moves all the machine management bits to the management cluster.  

Why is this important?

showing machine management/cluster auto-scaling tabs in the console is likely to confuse users and cause unnecessary side effects. 

Definition of Done

  • MachineConfig and MachineConfigPool should not be present, they should be either removed or hidden when the cluster is spawned using HyperShift. 
  • Cluster Settings show say the control plane is externally managed and be read-only.
  • Cluster Settings -> Configuration resources should be read-only, maybe hide the tab
  • Some resources should go in an allowlist. Most will be hidden
  • Review getting started steps

See Design Doc: https://docs.google.com/document/d/1k76JtRRHBdCCEjHPqKcYvbNVsuaGmRhWDLESWIm0mbo/edit#

 

Setup / Testing

It's based on the SERVER_FLAG controlPlaneTopology being set to External is really the driving factor here; this can be done in one of two ways:

  • Locally via a Bridge Variable, export BRIDGE_CONTROL_PLANE_TOPOLOGY_MODE="External"
  • Locally / OnCluster via modifying the window.SERVER_FLAGS.controlPlaneTopology to External in the dev tools

To test work related to cluster upgrade process, use a 4.10.3 cluster set on the candidate-4.10 upgrade channel using 4.11 frontend code.

If the Infrastructure.Status.ControlPlaneTopology is set to 'External', the console-operator will pass this information via the console-config.yaml co the console. Console pod will get re-deployed and will store the topology mode information as a SERVER_FLAG. Based on that value we need surface a message that the control plane is externally managed and add following changes:

  • Remove update button
  • Make channel read only
  • Link out to read only CV details page
  • Remove the ability to edit upstream configuration
  • Remove the cluster autoscaler field
  • Add an alert to the page so that users know the control plane is externally managed

In general, anything that changes a cluster version should be read only.

Check section 02 for more info: https://docs.google.com/document/d/1k76JtRRHBdCCEjHPqKcYvbNVsuaGmRhWDLESWIm0mbo/edit#

 

If the Infrastructure.Status.ControlPlaneTopology is set to 'External', the console-operator will pass this information via the console-config.yaml co the console. Console pod will get re-deployed and will store the topology mode information as a SERVER_FLAG. Based on that value we need to remove the ability to “Add identity providers” under “Set up your Cluster”. In addition to the getting started card, we should remove the ability to update a cluster on the details card when applicable (anything that changes a cluster version should be read only).

Summary of changes to the overview page:

  • Remove the ability to “Add identify providers” under “Set up your Cluster”
  • Remove cluster update CTA from the details card
  • Remove update alerts from the status card

Check section 03 for more info: https://docs.google.com/document/d/1k76JtRRHBdCCEjHPqKcYvbNVsuaGmRhWDLESWIm0mbo/edit#

If the Infrastructure.Status.ControlPlaneTopology is set to 'External', the console-operator will pass this information via the console-config.yaml to the console. Console pod will get re-deployed and will store the topology mode information as a SERVER_FLAG. Based on that value we need to suspend kubeadmin notifier, from the global notifications, since it contain link for updating the cluster OAuth configuration (see attachment).

 

 

If the Infrastructure.Status.ControlPlaneTopology is set to 'External', the console-operator will pass this information via the console-config.yaml to the console. Console pod will get re-deployed and will store the topology mode information as a SERVER_FLAG. Based on that value we need to suspend these notifications:

  • cluster upgrade notifications
  • new channel available notifications

For these we will need to check `ControlPlaneTopology`, if it's set to 'External' and also check if the user can edit cluster version(either by creating a hook or an RBAC call, eg. `canEditClusterVersion`)

 

Check section 05 for more info: https://docs.google.com/document/d/1k76JtRRHBdCCEjHPqKcYvbNVsuaGmRhWDLESWIm0mbo/edit#

Based on Cesar's comment we should be removing the `Control Plane` section, if the infrastructure.status.controlplanetopology being "External".

Epic Goal

Why is this important?

  • So the UX satisfies the current trands, where dark mode is becoming a standard for modern services.  

Acceptance Criteria

  • OCP admin console must be rendered in a preferred mode based on `prefers-color-scheme` media query
  • OCP admin console must be rendered in a preferred mode selected in the User Setting page
  • Create an followup epic/story for and listing and tracking changes needed in OCP console's dynamic plugins

Dependencies (internal and external)

  1. PatternFly - Dark mode PF variables

Previous Work (Optional):

  1. Mike Coker has worked on a POC from the PF point of view on both the admin and dev console, and the screenshot results are listed below along with the repo branch. Also listed is a document covering some of the common issues found when putting together the admin console POC. https://github.com/mcoker/console/tree/dark-theme
    Background POC work completed for reference:

PatternFly Dark Theme Handbookhttps://docs.google.com/document/d/1mRYEfUoOjTsSt7hiqjbeplqhfo3_rVDO0QqMj2p67pw/edit

Admin Console -> Workloads & Pods

Dev Console -> Gotcha pages: Observe Dashboard and Metrics, Add, Pipelines: builder, list, log, and run

Open questions::

  1. Who should be responsible for updating DynamicPlugins to be able to render in dark mode?

As a developer, I want to be able to scope the changes needed to enable dark mode for the admin console. As such, I need to investigate how much of the console will display dark mode using PF variables and also define a list of gotcha pages/components which will need special casing above and beyond PF variable settings.

 

Acceptance criteria:

As a developer, I want to be able to fix remaining issues from the spreadsheet of issues generated after the initial pass and spike of adding dark theme to the console.. As such, I need to make sure to either complete all remaining issues for the spreadsheet, or, create a bug or future story for any remaining issues in these two documents.

 

Acceptance criteria:

An epic we can duplicate for each release to ensure we have a place to catch things we ought to be doing regularly but can tend to fall by the wayside.

The Cluster Dashboard Details Card Protractor integration test was failing at high rate, and despite multiple attempts to fix, was never fully resolved, so it was disabled as a way to fix https://bugzilla.redhat.com/show_bug.cgi?id=2068594. Migrating this entire file to Cypress should give us better debugging capability, which is what was done to fix a similarly problematic project dashboard Protractor test.

This epic contains all the Dynamic Plugins related stories for OCP release-4.11 

Epic Goal

  • Track all the stories under a single epic

Acceptance Criteria

  •  

Currently, enabled plugins can fail to load for a variety of reasons. For instance, plugins don't load if the plugin name in the manifest doesn't match the ConsolePlugin name or the plugin has an invalid codeRef. There is no indication in the UI that something has gone wrong. We should explore ways to report this problem in the UI to cluster admins. Depending on the nature of the issue, an admin might be able to resolve the issue or at least report a bug against the plugin.

The message about failing could appear in the notification drawer and/or console plugins tab on the operator config. We could also explore creating an alert if a plugin is failing.

 

AC:

  • Add notification into the Notification Drawer in case a Dynamic Plugin will error out during load.
  • Render these errors in the status card, notification section, as well.
  • For each failed plugin we should create a separate notification.

We need to provide a base for running integration tests using the dynamic plugins. The tests should initially

  • Create a deployment and service to run the dynamic demo plugin
  • Update the console operator config to enable the plugin
  • Wait for the plugin to be available
  • Test at least one extension point used by the plugin (such as adding items to the nav)
  • Disable the plugin when done

Once the basic framework is in place, we can update the demo plugin and add new integration tests when we add new extension points.

https://github.com/openshift/console/tree/master/frontend/dynamic-demo-plugin

 

https://github.com/openshift/enhancements/blob/master/enhancements/console/dynamic-plugins.md

 

https://github.com/openshift/console/tree/master/frontend/packages/console-plugin-sdk

Currently, you need to navigate to

Cluster Settings ->
Global configuration ->
Console (operator) config ->
Console plugins

to see and managed plugins. This takes a lot of clicks and is not discoverable. We should look at surfacing plugin details where they're easier to find – perhaps on the Cluster Settings page – or at least provide a more convenient link somewhere in the UI.

AC: Add the Dynamic Plugins section to the Status Card in the overview that will contain:

  • count of active and non-active plugins
  • link to the ConsolePlugins instances page
  • status of the loaded plugins and breakout error

cc Ali Mobrem Robb Hamilton

We have a Timestamp component for consistent display of dates and times that we should expose through the SDK. We might also consider a hook that formats dates and times for places were you don't want or cant use the component, eg. times on a chart. 

This will become important when we add a user preference for dates so that plugins show consistent dates and times as console. If I set my user preference to UTC dates, console should show UTC dates everywhere.

 

AC:

  • Expose the Timestamp component inside the SDK. 
  • Replace the connect with useSelector hook
  • Keep the original component and proxy it to the new one in the SDK

 

 

 

cc Jakub Hadvig Sho Weimer 

In the 4.11 release, a console.openshift.io/default-i18next-namespace annotation is being introduced. The annotation indicates whether the ConsolePlugin contains localization resources. If the annotation is set to "true", the localization resources from the i18n namespace named after the dynamic plugin (e.g. plugin__kubevirt), are loaded. If the annotation is set to any other value or is missing on the ConsolePlugin resource, localization resources are not loaded. 

 

In case these resources are not present in the dynamic plugin, the initial console load will be slowed down. For more info check BZ#2015654

 

AC:

  • console-operator should be checking for the new console.openshift.io/use-i18n annotation, update the console-config.yaml accordingly and redeploy the console server
  • console server should pick up the changes in the console-config.yaml and only load the i18n namespace that are available

 

Follow up of https://issues.redhat.com/browse/CONSOLE-3159

 

 

Goal

  • Add the ability for users to select supported but not recommended updates.
  • Refine workflow when both "upgradeable=false" and "supported-but-not-recommended" updates occur

Background
RFE: for 4.10, Cincinnati and the cluster-version operator are adding conditional updates (a.k.a. targeted edge blocking): https://issues.redhat.com/browse/OTA-267

High-level plans in https://github.com/openshift/enhancements/blob/master/enhancements/update/targeted-update-edge-blocking.md#update-client-support-for-the-enhanced-schema

Example of what the oc adm upgrade UX will be in https://github.com/openshift/enhancements/blob/master/enhancements/update/targeted-update-edge-blocking.md#cluster-administrator.

The oc implementation landed via https://github.com/openshift/oc/pull/961.

Design

  • Use case 01: "supported but not recommended" occurs to the latest version:
    • Add an info icon next to the version on update path with a pop-over to explain about why updating to this version is supported, but not recommended and a link to known risks
    • Identify the difference in "recommended" versions, "supported but not recommended" versions, and "blocked" versions (upgradeable=false) in the + more modal.
    • The latest version is pre-selected in the dropdown in the update modal with an inline alert to inform users about supported-but-not-recommended version with link to known risks. Users can choose to update to another recommended versions, update to a supported-but-not-recommended one, or wait.
    • The "recommended" and "supported but not recommended" updates are separated in the dropdown.
    • If a user selects a "recommended" update, the inline alert disappears.
  • Use case 02: When both "upgradeable=false" and "supported but not recommended" occur:
    • Add an alert banner to explain why users shouldn’t update to the latest version and link to how to resolve on the cluster settings details page. Users have the options to resolve the issue, update to a patch version, or wait.
    • If users open the update modal without resolving the "upgradeable=false" issue, the next recommended version is pre-selected. An expandable link "View blocked versions (#)" is included under the dropdown to show "upgradeable=false" versions with resolve link.
    • If users resolve the "upgradeable=false" issue, the cluster settings page will change to use case 01
    • Question: Priority on changing the upgradeable=false alert banner in update modal and blocked versions in dropdown

See design doc: https://docs.google.com/document/d/1Nja4whdsI5dKmQNS_rXyN8IGtRXDJ8gXuU_eSxBLMIY/edit#

See marvel: https://marvelapp.com/prototype/h3ehaa4/screen/86077932

The "Update Version" modal on the cluster settings page should be updated to give users information about recommended, not recommended, and blocked update versions.

  • When the modal is opened, the latest recommended update version should be pre-selected in the version dropdown.
  • Blocked versions should no longer be displayed in the version dropdown, and should instead be displayed in a collapsible field below the dropdown.
  • When blocked versions are present, a link should be provided to the cluster operator tab. The version dropdown itself should have two labeled sections: "Recommended" and "Supported but not recommended".
  • When the user selects a "Supported but not recommended" item from the version dropdown, an inline info alert should appear below the version selection field and should provide a link to known risks associated with the selected version. This is an external link provided through the ClusterVersion API.

Update the cluster settings page to inform the user when the latest available update is supported but not recommended. Add an informational popover to the latest version in  update path visualization.

Epic Goal

  • Add telemetry so that we know how image stream features are used.

Why is this important?

  • We have a long standing epic to create image streams v2. We need to better understand how image streams are used today.

Scenarios

  1. ...

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • ...

Dependencies (internal and external)

  1. ...

Previous Work (Optional):

Open questions::

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

Epic Goal

  • Make the image registry distributed across availability zones.

Why is this important?

  • The registry should be highly available and zone failsafe.

Scenarios

  1. As an administrator I want to rely on a default configuration that spreads image registry pods across topology zones so that I don't suffer from a long recovery time (>6 mins) in case of a complete zone failure if all pods are impacted.

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.

Dependencies (internal and external)

  1. Pod's topologySpreadConstraints

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: https://github.com/openshift/cluster-image-registry-operator/pull/730
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

Story: As an administrator I want to rely on a default configuration that spreads image registry pods across topology zones so that I don't suffer from a long recovery time (>6 mins) in case of a complete zone failure if all pods are impacted.

Background: The image registry currently uses affinity/anti-affinity rules to spread registry pods across different hosts. However this might cause situations in which all pods end up on hosts of a single zone, leading to a long recovery time of the registry if that zone is lost entirely. However due to problems in the past with the preferred setting of anti-affinity rule adherence the configuration was forced instead with required and the rules became constraints. With zones as constraints the internal registry would not have deployed anymore in environments with a single zone, e.g. internal CI environment. Pod topology constraints is a new API that is supported in OCP which can also relax constraints in case they cannot be satisfied. Details here: https://docs.openshift.com/container-platform/4.7/nodes/scheduling/nodes-scheduler-pod-topology-spread-constraints.html

Acceptance criteria:

  • by default the internal registry is deployed with at least two replica
  • by default the topology constraints should be on a zone-basis, so that by defaults one registry pod is scheduled in each zone
  • when constraints can't be satisfied the registry should deploy anyway
  • we should not do this in SNO environments
  • the registry should still work on SNO environments

Open Questions:

  • what happens in environments where the storage is zone dependent?
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

As an OpenShift administrator
I want to provide the registry operator with a custom certificate authority for S3 storage
so that I can use a third-party S3 storage provider.

Acceptance criteria

  1. Users can specify a configmap name (from openshift-config) in config.imageregistry/cluster's spec.storage.s3.
  2. The operator uses CA from this configmap to check S3 bucket.
  3. The image registry pod uses CA from this configmap to access the S3 bucket.
  4. When a custom CA is defined, the operator/image-registry should still trust certificate authorities that are used by Amazon S3 and other well-known CAs.
  5. An end-to-end test that runs minio and checks the image registry becomes healthy with it.

Goal

Remove Jenkins from the OCP Payload.

Problem

  • Jenkins images are "non-trival in size, impact experience around OCP payloads
  • Security advisories cannot be handled once, but against all actively supported OCP releases, adding to response time for handling said advisories
  • Some customers may now want to upgrade Jenkins as OCP upgrades (making this configurable is more ideal)

Why is this important

  • This is an engineering motivated item to reduce costs so we have more cycles for strategic work
  • Aside from the team itself, top level OCP architects want this to reduce the image size, improve general OCP upgrade experience
  • Sends a mix message with respect to what is startegic CI/CI when Jenkins is baked into OCP, but Tekton/Pipelines is an add-on, day 2 install sort of thing

Dependencies (internal and external)

See epic linking - need alternative non payload image available to provide relatively seamless migration

 

Also, the EP for this is approved and merged at https://github.com/openshift/enhancements/blob/master/enhancements/builds/remove-jenkins-payload.md

Estimate (xs, s, m, l, xl, xxl):

Questions:

       PARTIAL ANSWER ^^:  confirmed with Ben Parees in https://coreos.slack.com/archives/C014MHHKUSF/p1646683621293839 that EP merging is currently sufficient OCP "technical leadership" approval.

 

Previous work

 

Customers

assuming none

User Stories

 

As maintainers of the OpenShift jenkins component, we need run Jenkins CI for PR testing against openshift/jenkins, openshift/jenkins-sync-plugin, openshift/jenkins-client-plugin, openshift/jenkins-openshift-login-plugin, using images built in the CI pipeline but not injected into CI test clusters via sample operator overriding the jenkins sample imagestream with the jenkins payload image.

 

As maintainers of the OpenShift Jenkins component, we need Jenkins periodics for the client and sync plugins to run against the latest non payload, CPaas image, promoted to CI's image locations on quay.io, for the current release in development.

 

As maintainers of the OpenShift Jenkins component, we need Jenkins related tests outside of very basic Jenkins Pipieline Strategy Build Config verification, removed from openshift-tests in OpenShift Origin, using a non-payload, CPaas image pertinent to the branch in question.

Acceptance criteria

  • all PR CI Tests do not utilize samples operator manipulation of the jenkins imagestream with the in payload image, but rather images including the PRs changes
  • all periodic CI Tests do not utilize samples operator manipulation of the jenkins imagestream with the in payload image, but rather CI promoted images for the current release pushed to quay.io

High Level, we ideally want to vet the new CPaas image via CI and periodics BEFORE we start changing the samples operator so that it does not manipulate the jenkins imagestream (our tests will override the samples operator override)

QE Impact

NONE ... QE should wait until JNKS-254

Docs Impact

NONE

PX Impact

 

NONE

Launch Checklist

Dependencies identified
Blockers noted and expected delivery timelines set
Design is implementable
Acceptance criteria agreed upon
Story estimated

Notes

  • Our CSI shared resource experience will help us here
  • but the old IMAGE_FORMAT stuff is deprecated, and does not work well with step registry stuff
  • instead, we need to use https://docs.ci.openshift.org/docs/architecture/ci-operator/#dependency-overrides
  • Makefile level logic will use `oc tag` to update the jenkins imagestream created as part of samples to override the use of the in payload image with the image build by the PR, or for periodics, with what has been promoted to quay.io
  • Ultimately, CI step registry for capturing the `oc tag` update the imagestream logic is the probably end goal
  • JNKS-268 might change how we do periodics, but the current thought is to get existing periodics working with the CPaas image first

Possible staging

1) before CPaas is available, we can validate images generated by PRs to openshift/jenkins, openshift/jenkins-sync-plugin, openshift/jenkins-client-plugin by taking the image built by the image (where the info needed to get the right image from the CI registry is in the IMAGE_FORMAT env var) and then doing an `oc tag --source=docker <PR image ref> openshift/jenkins:2` to replace the use of the payload image in the jenkins imagestream in the openshift namespace with the PRs image

2) insert 1) in https://github.com/openshift/release/blob/master/ci-operator/step-registry/jenkins/sync-plugin/e2e/jenkins-sync-plugin-e2e-commands.sh and https://github.com/openshift/release/blob/master/ci-operator/step-registry/jenkins/client-plugin/tests/jenkins-client-plugin-tests-commands.sh where you test for IMAGE_FORMAT being set

3) or instead of 2) you update the Makefiles for the plugins to call a script that does the same sort of thing, see what is in IMAGE_FORMAT, and if it has something, do the `oc tag`

 

https://github.com/openshift/release/pull/26979 is a prototype of how to stick the image built from a PR and conceivably the periodics to get the image built from it and tag it into the jenkins imagestream in the openshift namespace in the test cluster

 

Epic Goal

  • Remove this UI from our stack that we cannot support.

Why is this important?

  • Reduce support burden.
  • Remove Bugzilla burden of addressing continuous CVEs found in this project.

Acceptance Criteria

  • All Prometheus upstream UI links are removed
  • Related documentation is updated
  • Ports/routes etc configured to expose access to this UI are removed such that no configuration we provide enables access to this UI or its codepaths.
  • There is no reason any CVEs found in this UI would ever require intervention by the Monitoring Team.

Dependencies (internal and external)

  1. Make the Prometheus Targets information available in Console UI (https://issues.redhat.com/browse/MON-1079)

Previous Work (Optional):

Open questions::

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

After installing or upgrading to the latest OCP version, the existing OpenShift route to the prometheus-k8s service is updated to be a path-based route to '/api/v1'.

DoD:

  • It is not possible to access the Prometheus UI via the OpenShift route
  • Using a bearer token with sufficient permissions, it is possible to access the /api/v1/* endpoints via the OpenShift route.
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Following up on https://issues.redhat.com/browse/MON-1320, we added three new CLI flags to Prometheus to apply different limits on the samples' labels. These new flags are available starting from Prometheus v2.27.0, which will most likely be shipped in OpenShift 4.9.

The limits that we want to look into for OCP are the following ones:

# Per-scrape limit on number of labels that will be accepted for a sample. If
# more than this number of labels are present post metric-relabeling, the
# entire scrape will be treated as failed. 0 means no limit.
[ label_limit: <int> | default = 0 ]

# Per-scrape limit on length of labels name that will be accepted for a sample.
# If a label name is longer than this number post metric-relabeling, the entire
# scrape will be treated as failed. 0 means no limit.
[ label_name_length_limit: <int> | default = 0 ]

# Per-scrape limit on length of labels value that will be accepted for a sample.
# If a label value is longer than this number post metric-relabeling, the
# entire scrape will be treated as failed. 0 means no limit.
[ label_value_length_limit: <int> | default = 0 ]

We could benefit from them by setting relatively high values that could only induce unbound cardinality and thus reject the targets completely if they happened to breach our constrainst.

DoD:

  • Being able to configure label scrape limits for UWM

Epic Goal

When users configure CMO to interact with systems outside of an OpenShift cluster, we want to provide an easy way to add the cluster ID to the data send.

Why is this important?

Technically this can be achieved today, by adding an identifying label to the remote_write configuration for a given cluster. The operator adding the remote_write integration needs to take care that the label is unique over the managed fleet of clusters. This however adds management complexity. Any given cluster already has a pseudo-unique datum, that can be used for this purpose.

  • Starting in 4.9 we support the Prometheus remote_write feature to send metric data to a storage integration outside of the cluster similar to our own Telemetry service.
  • In Telemetry we already use the cluster ID to distinguish the various clusters.
  • For users of remote_write this could add an easy way to add such distinguishing information.

Scenarios

  1. An organisation with multiple OpenShift clusters want to store their metric data centralized in a dedicated system and use remote_write in all their clusters to send this data. When querying their centralized storage, metadata (here a label) is needed to separate the data of the various clusters.
  2. Service providers who manage multiple clusters for multiple customers via a centralized storage system need distinguishing metadata too. See https://issues.redhat.com/browse/OSD-6573 for example

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • Document how to use this feature

Dependencies (internal and external)

  1. none

Previous Work (Optional):

  1. none

Open questions::

  1.  

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

Implementation proposal:

 

Expose a flag in the CMO configuration, that is false by default (keeps backward compatibility) and when set to true will add the _id label to a remote_write configuration. More specifically it will be added to the top of a remote_write relabel_config list via the replace action. This will add the label as expect, but additionally a user could alter this label in a later relabel config to suit any specific requirements (say rename the label or add additional information to the value).
The location of this flag is the remote_write Spec, so this can be set for individual remote_write configurations.

Add an optional boolean flag to CMOs definition of RemoteWriteSpec that if true adds an entry in the specs WriteRelabelConfigs list.

I went with adding the relabel config to all user-supplied remote_write configurations. This path has no risk for backwards compatibility (unless users use the {}tmp_openshift_cluster_id{} label, seems unlikely) and reduces overall complexity, as well as documentation complexity.

The entry should look like what is already added to the telemetry remote write config and it should be added as the first entry in the list, before any user supplied relabel configs.

We currently use a sample app to e2e test remote write in CMO.
In order to test the addition of the cluster_id relabel config, we need to confirm that the metrics send actually have the expected label.
For this test we should use Prometheus as the remote_write target. This allows us to query the metrics send via remote write and confirm they have the expected label.

Epic Goal

  • Offer the option to double the scrape intervals for CMO controlled ServiceMonitors in single node deployments
  • Alternatively automatically double the same scrape intervals if CMO detects an SNO setup

The potential target ServiceMonitors are:

  • kubelet
  • kube-state-metrics
  • node-exporter
  • etcd
  • openshift-state-metrics

Why is this important?

  • Reduce CPU usage in SNO setups
  • Specifically doubling the scrape interval is important because:
  1. we are confident that this will have the least chance to interfere with existing rules. We typically have rate queries over the last 2 minutes (no shorter time window). With 30 second scrape intervals (the current default) this gives us 4 samples in any 2 minute window. rate needs at least 2 samples to work, we want another 2 for failure tolerance. Doubling the scrape interval will still give us 2 samples in most 2 minute windows. If a scrape fails, a few rule evaluations might fail intermittently.
  2. We expect a measureable reduction of CPU resources (see previous work)

Scenarios

  1. RAN deployments (Telco Edge) are SNO deployments. In these setups a full CMO deployment is often not needed and the default setup consumes too many resources. OpenShift as a whole has only very limited CPU cycles available and too many cycles are spend on Monitoring

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.
  • ...

Previous Work (Optional):

  1. https://issues.redhat.com/browse/MON-1569

Open questions:

  1. Whether doubling some scrape intervals reduces CPU usage to fit into the assigned budget

Non goals

  • Allow arbitrarily long scrape intervals. This will interfere with alert and recoring rules
  • Implement a global override to scrape intervals.
The details of this Jira Card are restricted (Red Hat Employee and Contractors only)

Description

As a user, I want the topology view to be less cluttered as I doom out showing only information that I can discern and still be able to get a feel for the status of my project.

Acceptance Criteria

  1. When zoomed to 50% scale, all labels & decorators will be hidden. Label are shown when hovering over the node
  2. When zoomed to 30% scale, all labels, decorators, pod rings & icons will be hidden. Node shape remains the same, and background is either white, yellow or red. Background color is determined based on aggregate status of pods, alerts, builds and pipelines. Tooltip is available showing node name as well as the "things" which are attributing to the warning/error status.

Additional Details:

Description

As a user, I want to understand which service bindings connected a service to a component successfully or not. Currently it's really difficult to understand and needs inspection into each ServiceBinding resource (yaml).

Acceptance Criteria

  1. Show a status badge on the SB details page
  2. Show a Status field in the right column of the SB details page
  3. Show the Status field in the right column of the Topology side panel when a SB is selected
  4. Show an indicator in the Topology view which will help to differentiate when the service binding is in error state
  5. Define the available statuses & associated icons 🥴
    1. Connected
    2. Error
  6. Error states defined by the SB conditions … if any of these 3 are not True, the status will be displayed as Error

Additional Details:

See also https://docs.google.com/document/d/1OzE74z2RGO5LPjtDoJeUgYBQXBSVmD5tCC7xfJotE00/edit

Problem:

This epic is mainly focused on the 4.10 Release QE activities

Goal:

1. Identify the scenarios for automation
2. Segregate the test Scenarios into smoke, Regression and other user stories
a. Update the https://docs.jboss.org/display/ODC/Automation+Status+Report
3. Align with layered operator teams for updating scripts
3. Work closely with dev team for epic automation
4. Create the automation scripts using cypress
5. Implement CI for nightly builds
6. Execute scripts on sprint basis

Why is it important?

To the track the QE progress at one place in 4.10 Release Confluence page

Use cases:

  1. <case>

Acceptance criteria:

  1. <criteria>

Dependencies (External/Internal):

Design Artifacts:

Exploration:

Note:

Acceptance criteria:

  1. Execute the automation scripts on ODC nightly builds in OpenShift CI (prow) periodically
  2. provide a separate job for each "plugin" (like pipelines, knative, etc.)

Goal:

This epic covers a number of customer requests(RFEs) as well as increases usability.

Why is it important?

Customer satisfaction as well as improved usability.

Acceptance Criteria

  1. Allow user to re-arrange the resources which have ben added to nav by the user
  2. Improved user experience (form based experience)
    1. Form based editing of Routes
    2. Form based creation and editing of Config Maps
    3. Form base creation of Deployments
  3. Improved discovery
    1. Include Share my project on the Add page to increase discoverability
    2. NS Helm Chart Repo
      1. Add tile to Add page for discoverability
      2. Provide a form driven creation experience
      3. User should be able to switch back and forth from Form/YAML
      4. change the intro text to the below & have the link in the intro text bring up the full page form
        1. Browse for charts that help manage complex installations and upgrades. Cluster administrators can customize the content made available in the catalog. Alternatively, developers can try to configure their own custom Helm Chart repository.

Dependencies (External/Internal):

None

Exploration:

Miro board from Epic Exploration

Description

As a user, I want to use a form to create Deployments

Acceptance Criteria

  1. Use existing edit Deployment form component for creating Deployments
  2. Display the form when clicked on `Create Deployment` in the Deployments Search page in the Dev perspective
  3. The `Create Deployment` button in the Deployments list page & the search page in the Admin perspective should have a similar experience.

Additional Details:

Edit deployment form ODC-5007

Description

As a user, I should be able to switch between the form and yaml editor while creating the ProjectHelmChartRepository CR.

Acceptance Criteria

  1. Convert the create form into a form-yaml switcher
  2. Display this form-yaml view in Search -> ProjectHelmChartRepositories in both perspectives

Additional Details:

Form component https://github.com/openshift/console/pull/11227

Problem:

Currently we are only able to get limited telemetry from the Dev Sandbox, but not from any of our managed clusters or on prem clusters.

Goals:

  1. Enable gathering segment telemetry whenever cluster telemetry is enabled on OSD clusters
  2. Have our OSD clusters opt into telemetry by default
  3. Work with PM & UX to identify additional metrics to capture in addition to what we have enabled currently on Sandbox.
  4. Ability to get a single report from woopra across all of our Sandbox and OSD clusters.
  5. Be able to generate a report including metrics of a single cluster or all clusters of a certain type ( sandbox, or OSD)

Why is it important?

In order to improve properly analyze usage and the user experience, we need to be able to gather as much data as possible.

Acceptance Criteria

  1. Extend console backend (bridge) to provide configuration as SERVER_FLAGS
    // JS type
    telemetry?: Record<string, string>
    
    1. Read the annotation of the cluster ConfigMap for telemetry data and pass them into the internal serverconfig.
    2. Pass through this internal serverconfig and export it as SERVER_FLAGS.
    3. Add a new --telemetry CLI option so that the telemetry options could be tested in a dev environment:
      ./bin/bridge --telemetry SEGMENT_API_KEY=a-key-123-xzy
      ./bin/bridge --telemetry CONSOLE_LOG=debug
      
  2. TBD: In best case the new annotation could be read from the cluster ConfigMap...
    1. Otherwise update the console-operator to pass the annotation from the console cluster configuration to the console ConfigMap.

Additional Details:

  1. More information about the integration with the backend could be found in the Telemetry on OSD clusters Google Doc

Goal:
Enhance oc adm release new (and related verbs info, extract, mirror) with heterogeneous architecture support

tl;dr

oc adm release new (and related verbs info, extract, mirror) would be enhanced to optionally allow the creation of manifest list release payloads. The manifest list flow would be triggered whenever the CVO image in an imagestream was a manifest list. If the CVO image is a standard manifest, the generated release payload will also be a manifest. If the CVO image is a manifest list, the generated release payload would be a manifest list (containing a manifest for each arch possessed by the CVO manifest list).

In either case, oc adm release new would permit non-CVO component images to be manifest or manifest lists and pass them through directly to the resultant release manifest(s).

If a manifest list release payload is generated, each architecture specific release payload manifest will reference the same pullspecs provided in the input imagestream.

 

More details in Option 1 of https://docs.google.com/document/d/1BOlPrmPhuGboZbLZWApXszxuJ1eish92NlOeb03XEdE/edit#heading=h.eldc1ppinjjh

Incomplete Epics

This section includes Jira cards that are linked to an Epic, but the Epic itself is not linked to any Feature. These epics were not completed when this image was assembled

Epic Goal

  • Update image registry dependencies (Kubernetes and OpenShift) to the latest versions.

Why is this important?

  • New versions usually bring improvements that are needed by the registry and help with getting updates for z-stream.

Scenarios

  1. As an OpenShift engineer, I want my components to use the versions of dependencies, so that they get fixes for known issues and can be easily updated in z-stream.

Acceptance Criteria

  • CI - MUST be running successfully with tests automated

Dependencies (internal and external)

  1. Kubernetes 1.24

Previous Work (Optional):

  1. IR-210

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • QE - Test plans in Polarion: <link or reference to Polarion>

As a OpenShift engineer
I want image-registry to use the latest k8s libraries
so that image-registry can benefit from new upstream features.

Acceptance criteria

  • image-registry uses k8s.io/api v1.24.z
  • image-registry uses latest openshift/api, openshift/library-go, openshift/client-go

Epic Goal

  • Provide a dedicated dashboard for NVIDIA GPU usage visualization in the OpenShift Console.

Why is this important?

  • Customers that use GPUs in their clusters usually have the GPU workloads as the main purpose of their cluster. As such, it makes much more sense to have the details about the usage they are doing of GPGPU resources AND CPU/RAM rather than just CPU/RAM

Scenarios

  1. As an admin of a cluster dedicated to data science, I want to quickly find out how much of my very costly resources are currently in use and if things are getting queued due to lack of resources

Acceptance Criteria

  • CI - MUST be running successfully with tests automated
  • Release Technical Enablement - Provide necessary release enablement details and documents.

Dependencies (internal and external)

  1. The NVIDIA GPU Operator must export to prometheus the relevant data

Open questions::

  1. Will NVIDIA agree to these extra data exports in their GPU Operator?

I asked Zvonko Kaiser and he seemed open to it. I need to confirm with Shiva Merla

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

OCP/Telco Definition of Done
Epic Template descriptions and documentation.

<--- Cut-n-Paste the entire contents of this description into your new Epic --->

Epic Goal

  • Run OpenShift builds that do not execute as the "root" user on the host node.

Why is this important?

  • OpenShift builds require an elevated set of capabilities to build a container image
  • Builds currently run as root to maintain adequate performance
  • Container workloads should run as non-root from the host's perspective. Containers running as root are a known security risk.
  • Builds currently run as root and require a privileged container. See BUILD-225 for removing the privileged container requirement.

Scenarios

  1. Run BuildConfigs in a multi-tenant environment
  2. Run BuildConfigs in a heightened security environment/deployment

Acceptance Criteria

  • Developers can opt into running builds in a cri-o user namespace by providing an environment variable with a specific value.
  • When the correct environment variable is provided, builds run in a cri-o user namespace, and the build pod does not require the "privileged: true" security context.
  • User namespace builds can pass basic test scenarios for the Docker and Source strategy build.
  • Steps to run unprivileged builds are documented.

Dependencies (internal and external)

  1. Buildah supports running inside a non-privileged container
  2. CRI-O allows workloads to opt into running containers in user namespaces.

Previous Work (Optional):

  1. BUILD-225 - remove privileged requirement for builds.

Open questions::

Done Checklist

  • CI - CI is running, tests are automated and merged.
  • Release Enablement <link to Feature Enablement Presentation>
  • DEV - Upstream code and tests merged: <link to meaningful PR or GitHub Issue>
  • DEV - Upstream documentation merged: <link to meaningful PR or GitHub Issue>
  • DEV - Downstream build attached to advisory: <link to errata>
  • QE - Test plans in Polarion: <link or reference to Polarion>
  • QE - Automated tests merged: <link or reference to automated tests>
  • DOC - Downstream documentation merged: <link to meaningful PR>

User Story

As a developer building container images on OpenShift
I want to specify that my build should run without elevated privileges
So that builds do not run as root from the host's perspective with elevated privileges

Acceptance Criteria

  • Developers can provide an environment variable to indicate the build should not use privileged containers
  • When the correct env var + value is specified, builds run in a user namespace (non-root on the host)

QE Impact

No QE required for Dev Preview. OpenShift regression testing will verify that existing behavior is not impacted.

Docs Impact

We will need to document how to enable this feature, with sufficient warnings regarding Dev Preview.

PX Impact

This likely warrants an OpenShift blog post, potentially?

Notes

Other Complete

This section includes Jira cards that are not linked to either an Epic or a Feature. These tickets were completed when this image was assembled

4.12 will have an option in cri-o: add_inheritable_capabilities which will allow a user to opt-out of dropping inheritable capabilities (which comes as a fix for CVE-2022-27652). We should add it by default as a drop-in in 4.11 so clusters that upgrade from it inherit the old behavior

This is a clone of issue OCPBUGS-11993. The following is the description of the original issue:

Description of problem:

There's argument number mismatch on release_vif() call while reverting
port association.

Version-Release number of selected component (if applicable):

 

How reproducible:

It's clear in the code, no need to reproduce this.

Steps to Reproduce:

1.
2.
3.

Actual results:

TypeError

Expected results:

KuryrPort released

Additional info:

 

This is a clone of issue OCPBUGS-4805. The following is the description of the original issue:

This is a clone of issue OCPBUGS-4101. The following is the description of the original issue:

Description of problem:

We experienced two separate upgrade failures relating to the introduction of the SYSTEM_RESERVED_ES node sizing parameter, causing kubelet to stop running.

One cluster (clusterA) upgraded from 4.11.14 to 4.11.17. It experienced an issue whereby 
   /etc/node-sizing.env 
on its master nodes contained an empty SYSTEM_RESERVED_ES value:

---
cat /etc/node-sizing.env 
SYSTEM_RESERVED_MEMORY=5.36Gi
SYSTEM_RESERVED_CPU=0.11
SYSTEM_RESERVED_ES=
---

causing the kubelet to not start up. To restore service, this file was manually updated to set a value (1Gi), and kubelet was restarted.

We are uncertain what conditions led to this occuring on the clusterA master nodes as part of the upgrade.

A second cluster (clusterB) upgraded from 4.11.16 to 4.11.17. It experienced an issue whereby worker nodes were impacted by a similar problem, however this was because a custom node-sizing-enabled.env MachineConfig which did not set SYSTEM_RESERVED_ES

This caused existing worker nodes to go into a NotReady state after the ugprade, and additionally new nodes did not join the cluster as their kubelet would become impacted. 

For clusterB the conditions are more well-known of why the value is empty.

However, for both clusters, if SYSTEM_RESERVED_ES ends up as empty on a node it can cause the kubelet to not start. 

We have some asks as a result:
- Can MCO be made to recover from this situation if it occurs, perhaps  through application of a safe default if none exists, such that kubelet would start correctly?
- Can there possibly be alerting that could indicate and draw attention to the misconfiguration?

Version-Release number of selected component (if applicable):

4.11.17

How reproducible:

Have not been able to reproduce it on a fresh cluster upgrading from 4.11.16 to 4.11.17

Expected results:

If SYSTEM_RESERVED_ES is empty in /etc/node-sizing*env then a default should be applied and/or kubelet able to continue running.

Additional info:

 

This is a clone of issue OCPBUGS-6764. The following is the description of the original issue:

Description of problem:
The "Add Git Repository" has a "Show configuration options" expandable section that shows the required permissions for a webhook setup, and provides a link to "read more about setting up webhook".

But the permission section shows nothing when open this second expandable section, and the link doesn't do anything until the user enters a "supported" GitHub, GitLab or BitBucket URL.

Version-Release number of selected component (if applicable):
4.11-4.13

How reproducible:
Always

Steps to Reproduce:

  1. Install Pipelines operator
  2. Navigate to the Developer perspective > Pipelines
  3. Press "Create" and select "Repository"
  4. Click on "Show configuration options"
  5. Click on "See Git permissions"
  6. Click on "Read more about setting up webhook"

Actual results:

  1. The Git permission section shows no git permissions.
  2. The Read more link doesn't open any new page.

Expected results:

  1. The Git permission section should show some info or must not be disabled.
  2. The Read more link should open a page or must not be displayed as well.

Additional info:

  1. None

The two modules that are auto generated for the CLI docs need to add ":_content-type: REFERENCE" to the top of the files. Update the doc generation templates to add these.

Description of problem:

PROXY protocol cannot be enabled for the "Private" endpoint publishing strategy type.

Version-Release number of selected component (if applicable):

4.10.0+. PROXY protocol was made configurable for the "HostNetwork" and "NodePortService" endpoint publishing strategy types, but not for "Private", in this release.

How reproducible:

Always.

Steps to Reproduce:

1. Create an ingresscontroller with the "Private" endpoint publishing strategy type:

oc create -f - <<'EOF'
apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  name: example
  namespace: openshift-ingress-operator
spec:
  domain: example.com
  endpointPublishingStrategy:
    type: Private
    private:
      protocol: PROXY
EOF

2. Check the ingresscontroller's status:

oc -n openshift-ingress-operator get ingresscontrollers/example -o 'jsonpath={.status.endpointPublishingStrategy}'

3. Check whether the resulting router deployment has PROXY protocol enabled.

oc -n openshift-ingress get deployments/router-example -o 'jsonpath={.spec.template.spec.containers[0].env[?(@.name=="ROUTER_USE_PROXY_PROTOCOL")]}'

Actual results:

The ingresscontroller is created:

ingresscontroller.operator.openshift.io/example created

The status shows that the spec.endpointPublishingStrategy.private.protocol setting was ignored:

{"private":{},"type":"Private"}

The deployment does not enable PROXY protocol; the oc get command prints no output.

Expected results:

The ingresscontroller's status should indicate that PROXY protocol is enabled:

{"private":{"protocol":"PROXY"},"type":"Private"}

The deployment should have PROXY protocol enabled:

{"name":"ROUTER_USE_PROXY_PROTOCOL","value":"true"}

Additional info:

This bug report duplicates https://bugzilla.redhat.com/show_bug.cgi?id=2104481 in order to facilitate backports.

Description of problem:
In a complete disconnected cluster, the dev catalog is taking too much time in loading

Version-Release number of selected component (if applicable):

How reproducible:
Always

Steps to Reproduce:
1. A complete disconnected cluster
2. In add page go to the All services page
3.

Actual results:
Taking too much time too load

Expected results:
Time taken should be reduced

Additional info:
Attached a gif for reference

Description of problem:
Follow-up of: https://issues.redhat.com/browse/SDN-2988

This failure is perma-failing in the e2e-metal-ipi-ovn-dualstack-local-gateway jobs.

Example: https://prow.ci.openshift.org/view/gs/origin-ci-test/logs/periodic-ci-openshift-release-master-nightly-4.13-e2e-metal-ipi-ovn-dualstack-local-gateway/1597574181430497280
Search CI: https://search.ci.openshift.org/?search=when+using+openshift+ovn-kubernetes+should+ensure+egressfirewall+is+created&maxAge=336h&context=1&type=junit&name=e2e-metal-ipi-ovn-dualstack-local-gateway&excludeName=&maxMatches=5&maxBytes=20971520&groupBy=job
Sippy: https://sippy.dptools.openshift.org/sippy-ng/jobs/4.13/analysis?filters=%7B%22items%22%3A%5B%7B%22columnField%22%3A%22name%22%2C%22operatorValue%22%3A%22equals%22%2C%22value%22%3A%22periodic-ci-openshift-release-master-nightly-4.13-e2e-metal-ipi-ovn-dualstack-local-gateway%22%7D%5D%7D

Version-Release number of selected component (if applicable):

4.12,4.13

How reproducible:

Every time

Steps to Reproduce:

1. Setup dualstack KinD cluster
2. Create egress fw policy with spec
Spec:
  Egress:
    To:
      Cidr Selector:  0.0.0.0/0
    Type:             Deny
3. create a pod and ping to 1.1.1.1

Actual results:

Egress policy does not block flows to external IP

Expected results:

Egress policy blocks flows to external IP

Additional info:

It seems mixing ip4 and ip6 operands in ACL matchs doesnt work

This is a clone of issue OCPBUGS-8016. The following is the description of the original issue:

This is a clone of issue OCPBUGS-1748. The following is the description of the original issue:

Description of problem:

PipelineRun templates are currently fetched from `openshift-pipelines` namespace. It has to be fetched from `openshift` namespace.

Version-Release number of selected component (if applicable):
4.11 and 1.8.1 OSP

Align with operator changes https://issues.redhat.com/browse/SRVKP-2413 in 1.8.1, UI has to update the code to fetch pipelinerun templates from openshift namespace.

While running a PerfScale test we noticed that the hosted ovnkube-master pods always initially error on deployment. They eventually succeed on retry however. 

This is running quay.io/openshift-release-dev/ocp-release:4.11.11-x86_64 for the hosted clusters and the hypershift operator is quay.io/hypershift/hypershift-operator:4.11 on a 4.11.9 management cluster.

An example of the error in the ovnkube-master container:

```

F1102 13:27:51.935600       1 ovnkube.go:133] error when trying to initialize libovsdb SB client: unable to connect to any endpoints: failed to connect to ssl:ovnkube-master-0.ovnkube-master-internal.clusters-perf-pqd-0021.svc.cluster.local:9642: failed to open connection: dial tcp 10.131.8.25:9642: connect: connection refused. failed to connect to ssl:ovnkube-master-1.ovnkube-master-internal.clusters-perf-pqd-0021.svc.cluste

```

Description of problem:

When adding new nodes to the existing cluster, the newly allocated node-subnet can be overlapped with the existing node.

Version-Release number of selected component (if applicable):

openshift 4.10.30

How reproducible:

It's quite hard to reproduce but  there is a possibility it can happen any time. 

Steps to Reproduce:

1. Create a OVN dual-stack cluster
2. add nodes to the existing cluster
3. check the allocated node subnet 

Actual results:

Some newly added nodes have the same node-subnet and ovn-k8s-mp0 IP as some existing nodes.

Expected results:

Should have duplicated node-subnet and ovn-k8s-mp0 IP

Additional info:

Additional info can be found at the case 03329155 and the must-gather attached(comment #1) 

% omg logs ovnkube-master-v8crc -n openshift-ovn-kubernetes -c ovnkube-master | grep '2022-09-30T06:42:50.857'
2022-09-30T06:42:50.857031565Z W0930 06:42:50.857020       1 master.go:1422] Did not find any logical switches with other-config
2022-09-30T06:42:50.857112441Z I0930 06:42:50.857099       1 master.go:1003] Allocated Subnets [10.131.0.0/23 fd02:0:0:4::/64] on Node worker01.ss1.samsung.local
2022-09-30T06:42:50.857122455Z I0930 06:42:50.857105       1 master.go:1003] Allocated Subnets [10.129.4.0/23 fd02:0:0:a::/64] on Node oam04.ss1.samsung.local
2022-09-30T06:42:50.857130289Z I0930 06:42:50.857122       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.131.0.0/23","fd02:0:0:4::/64"]}] on node worker01.ss1.samsung.local
2022-09-30T06:42:50.857140773Z I0930 06:42:50.857132       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.129.4.0/23","fd02:0:0:a::/64"]}] on node oam04.ss1.samsung.local
2022-09-30T06:42:50.857166726Z I0930 06:42:50.857156       1 master.go:1003] Allocated Subnets [10.128.2.0/23 fd02:0:0:5::/64] on Node oam01.ss1.samsung.local
2022-09-30T06:42:50.857176132Z I0930 06:42:50.857157       1 master.go:1003] Allocated Subnets [10.131.0.0/23 fd02:0:0:4::/64] on Node rhel01.ss1.samsung.local
2022-09-30T06:42:50.857176132Z I0930 06:42:50.857167       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.128.2.0/23","fd02:0:0:5::/64"]}] on node oam01.ss1.samsung.local
2022-09-30T06:42:50.857185257Z I0930 06:42:50.857157       1 master.go:1003] Allocated Subnets [10.128.6.0/23 fd02:0:0:d::/64] on Node call03.ss1.samsung.local
2022-09-30T06:42:50.857192996Z I0930 06:42:50.857183       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.131.0.0/23","fd02:0:0:4::/64"]}] on node rhel01.ss1.samsung.local
2022-09-30T06:42:50.857200017Z I0930 06:42:50.857190       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.128.6.0/23","fd02:0:0:d::/64"]}] on node call03.ss1.samsung.local
2022-09-30T06:42:50.857282717Z I0930 06:42:50.857258       1 master.go:1003] Allocated Subnets [10.130.2.0/23 fd02:0:0:7::/64] on Node call01.ss1.samsung.local
2022-09-30T06:42:50.857304886Z I0930 06:42:50.857293       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.130.2.0/23","fd02:0:0:7::/64"]}] on node call01.ss1.samsung.local
2022-09-30T06:42:50.857338896Z I0930 06:42:50.857314       1 master.go:1003] Allocated Subnets [10.128.4.0/23 fd02:0:0:9::/64] on Node f501.ss1.samsung.local
2022-09-30T06:42:50.857349485Z I0930 06:42:50.857329       1 master.go:1003] Allocated Subnets [10.131.2.0/23 fd02:0:0:8::/64] on Node call02.ss1.samsung.local
2022-09-30T06:42:50.857371344Z I0930 06:42:50.857354       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.128.4.0/23","fd02:0:0:9::/64"]}] on node f501.ss1.samsung.local
2022-09-30T06:42:50.857371344Z I0930 06:42:50.857361       1 kube.go:99] Setting annotations map[k8s.ovn.org/node-subnets:{"default":["10.131.2.0/23","fd02:0:0:8::/64"]}] on node call02.ss1.samsung.local

This is a clone of issue OCPBUGS-7458. The following is the description of the original issue:

Description of problem:

- After upgrading to OCP 4.10.41, thanos-ruler-user-workload-1 in the openshift-user-workload-monitoring namespace is consistently being created and deleted.
- We had to scale down the Prometheus operator multiple times so that the upgrade is considered as successful.
- This fix is temporary. After some time it appears again and Prometheus operator needs to be scaled down and up again.
- The issue is present on all clusters in this customer environment which are upgraded to 4.10.41.

Version-Release number of selected component (if applicable):

 

How reproducible:

N/A, I wasn't able to reproduce the issue.

Steps to Reproduce:

 

Actual results:

 

Expected results:

 

Additional info:

 

This is a clone of issue OCPBUGS-4250. The following is the description of the original issue:

Description of problem:

Added a script to collect PodNetworkConnectivityChecks to able to view the overall status of the pod network connectivity.

Current must-gather collects the contents of `openshift-network-diagnostics` but does not collect the PodNetworkConnectivityCheck.

Version-Release number of selected component (if applicable):

4.12, 4.11, 4.10

Description of problem:

The reconciler removes the overlappingrangeipreservations.whereabouts.cni.cncf.io resources whether the pod is alive or not. 

Version-Release number of selected component (if applicable):

 

How reproducible:

Always

Steps to Reproduce:

1. Create pods and check the overlappingrangeipreservations.whereabouts.cni.cncf.io resources:

$ oc get overlappingrangeipreservations.whereabouts.cni.cncf.io -A
NAMESPACE          NAME                      AGE
openshift-multus   2001-1b70-820d-4b04--13   4m53s
openshift-multus   2001-1b70-820d-4b05--13   4m49s

2.  Verify that when the ip-reconciler cronjob removes the overlappingrangeipreservations.whereabouts.cni.cncf.io resources when run:

$ oc get cronjob -n openshift-multus
NAME            SCHEDULE       SUSPEND   ACTIVE   LAST SCHEDULE   AGE
ip-reconciler   */15 * * * *   False     0        14m             4d13h

$ oc get overlappingrangeipreservations.whereabouts.cni.cncf.io -A
No resources found

$ oc get cronjob -n openshift-multus
NAME            SCHEDULE       SUSPEND   ACTIVE   LAST SCHEDULE   AGE
ip-reconciler   */15 * * * *   False     0        5s              4d13h

 

Actual results:

The overlappingrangeipreservations.whereabouts.cni.cncf.io resources are removed for each created pod by the ip-reconciler cronjob.
The "overlapping ranges" are not used. 

Expected results:

The overlappingrangeipreservations.whereabouts.cni.cncf.io should not be removed regardless of if a pod has used an IP in the overlapping ranges.

Additional info:

 

Description of problem:

 

During ocp multinode spoke cluster creation agent provisioning is stuck on "configuring" because machineConfig service is crashing on the node.
After restarting the service still fails with 

Can't read link "/var/lib/containers/storage/overlay/l/V2OP2CCVMKSOHK2XICC546DUCG" because it does not exist. A storage corruption might have occurred, attempting to recreate the missing symlinks. It might be best wipe the storage to avoid further errors due to storage corruption. 

Version-Release number of selected component (if applicable):

Podman 4.0.2 + 

How reproducible:

sometimes

Steps to Reproduce:

1. deploy multinode spoke (ipxe + boot order )
2.
3.

Actual results:

4 agents in done state and 1 is in "configuring"

 

Expected results:

all agents are in "done" state

Additional info:

issue mentioned in https://github.com/containers/podman/issues/14003

 

Fix: https://github.com/containers/storage/issues/1136

 

 

 

This is a clone of issue OCPBUGS-2083. The following is the description of the original issue:

Description of problem:
Currently we are running VMWare CSI Operator in OpenShift 4.10.33. After running vulnerability scans, the operator was discovered to be running a known weak cipher 3DES. We are attempting to upgrade or modify the operator to customize the ciphers available. We were looking at performing a manual upgrade via Quay.io but can't seem to pull the image and was trying to steer away from performing a custom install from scratch. Looking for any suggestions into mitigated the weak cipher in the kube-rbac-proxy under VMware CSI Operator.

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

Description of problem:

Looks like a regression was introduced and the Windows networking tests started to fail accross all 4.11 CI jobs for both Linux-to-Windows and Windows-to-Windows pods communication. 

https://github.com/openshift/ovn-kubernetes/pull/1415 merged without passing Windows networking tests.

https://github.com/openshift/windows-machine-config-operator/pull/1359  shows networking tests failing accross all CI jobs.





Version-Release number of selected component (if applicable):

4.11

How reproducible:

Always 

Steps to Reproduce:

1. Trigger a job retest in any of the above mentioned PRs
 

Actual results:

Windows networking test fail

Expected results:

Windows networking test pass

Additional info:

Direct link to a release-4.11 aws-e2e-operator CI job showing the failed networking test

Description of problem:

The path used by --rotated-pod-logs to gather the rotated pod logs from /var/log/pods node folder via /api/v1/nodes/${NODE}/proxy/logs/${LOG_PATH} is only valid for regular pods but not for static pods.

The main problem is that, while normal pods have their rotated logs at this /var/log/pods/${POD_NAME}_${POD_UID_IN_API}/${CONTAINER_NAME}, static pods have them at /var/log/pods/${POD_NAME}_${CONFIG_HASH}/${CONTAINER_NAME} because the UID cannot be known at the time that the static pod is born (because static pods are created by kubelet before registering them in the kube-apiserver, and UID is assigned by the kube-apiserver).

The visible results of that are:

  • Spurious errors of not found resources related to the pods.
  • Rotated pod logs are not gathered even if present.

Version-Release number of selected component (if applicable):

4.10

How reproducible:

Always if there are static pods.

Steps to Reproduce:

1. oc adm inspect --rotated-pod-logs ns/openshift-etcd (or any other project with static pods).

Actual results:

  • Rotated pods not gathered.
  • Errors like these
    error: errors occurred while gathering data:
        one or more errors occurred while gathering pod-specific data for namespace: openshift-etcd
    
        [one or more errors occurred while gathering container data for pod etcd-master-0.example.net:
    
        the server could not find the requested resource, one or more errors occurred while gathering container data for pod etcd-master-1.example.net:
    
        the server could not find the requested resource, one or more errors occurred while gathering container data for pod etcd-master-2.example.net:
    
        the server could not find the requested resource]
    

Expected results:

No errors like the ones above and rotated pod logs to be gathered, if present.

Additional info:

Despite being marked as experimental, this --rotated-pod-logs is used in must-gather, so this issue can be easily reproduced by just running a default must-gather. I focused on bare oc adm inspect reproducers for simplicity.

Description of problem:

When queried dns hostname from certain pod on the certain node, responded from random coredns pod, not prefer local one. Is it expected result ?

# In OCP v4.8.13 case
// Ran dig command on the certain node which is running the following test-7cc4488d48-tqc4m pod.
sh-4.4# while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done
:
07:16:33 :172.217.175.238
07:16:34 :172.217.175.238 <--- Refreshed the upstream result
07:16:36 :142.250.207.46
07:16:37 :142.250.207.46

// The dig results is matched with the running node one as you can see the above one.
$ oc rsh  test-7cc4488d48-tqc4m bash -c 'while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done'
:
07:16:35 :172.217.175.238 
07:16:36 :172.217.175.238 <--- At the same time, the pod dig result is also refreshed.
07:16:37 :142.250.207.46
07:16:38 :142.250.207.46


But in v4.10 case, in contrast, the dns query result is various and responded randomly regardless local dns results on the node as follows.

# In OCP v4.10.23 case, pod's response from DNS services are not consistent.
$ oc rsh test-848fcf8ddb-zrcbx  bash -c 'while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done'
07:23:00 :142.250.199.110
07:23:01 :142.250.207.46
07:23:02 :142.250.207.46
07:23:03 :142.250.199.110
07:23:04 :142.250.199.110
07:23:05 :172.217.161.78

# Even though the node which is running the pod keep responding the same IP...
sh-4.4# while : ; do echo -n "$(date '+%H:%M:%S') :"; dig google.com +short; sleep 1; done
07:23:00 :172.217.161.78
07:23:01 :172.217.161.78
07:23:02 :172.217.161.78
07:23:03 :172.217.161.78
07:23:04 :172.217.161.78
07:23:05 :172.217.161.78

Version-Release number of selected component (if applicable):

v4.10.23 (ROSA)
SDN: OpenShiftSDN

How reproducible:

You can always reproduce this issue using "dig google.com" from both any pod and the node the pod running according to the above "Description" details.

Steps to Reproduce:

1. Run any usual pod, and check which node the pod is running on.
2. Run dig google.com on the pod and the node.
3. Check the IP is consistent with the running node each other. 

Actual results:

The response IPs are not consistent and random IP is responded.

Expected results:

The response IP is kind of consistent, and aware of prefer local dns.

Additional info:

This issue affects EgressNetworkPolicy dnsName feature.

This is a clone of OCPBUGS-853.

Description of problem:

Large OpenShift Container Platform 4.10.24 - Cluster is failing to update router-certs secret in openshift-config-managed namespace as the given secret is too big.

2022-09-01T06:24:15.157333294Z 2022-09-01T06:24:15.157Z ERROR operator.init.controller.certificate_publisher_controller controller/controller.go:266  Reconciler error  {"name": "foo-bar", "namespace": "openshift-ingress-operator", "error": "failed to ensure global secret: failed to update published router certificates secret: Secret \"router-certs\" is invalid: data: Too long: must have at most 1048576 bytes"}

The OpenShift Container Platform 4 - Cluster has 180 IngressController configured with endpointPublishingStrategy set to private.

Now the default certificate needs to be replaced but is not properly replicated to openshift-authentication namespace and potentially other location because of the problem mentioned (since the required secret can not be updated)

Version-Release number of selected component (if applicable):

OpenShift Container Platform 4.10.24

How reproducible:

Always

Steps to Reproduce:

1. Install OpenShift Container Platform 4.10
2. Create 180 IngressController with specific certificates
3. Check openshift-ingress-operator logs to see how it fails to update/create the necessary secret in openshift-config-managed

Actual results:

2022-09-01T06:24:15.157333294Z 2022-09-01T06:24:15.157Z ERROR operator.init.controller.certificate_publisher_controller controller/controller.go:266  Reconciler error  {"name": "foo-bar", "namespace": "openshift-ingress-operator", "error": "failed to ensure global secret: failed to update published router certificates secret: Secret \"router-certs\" is invalid: data: Too long: must have at most 1048576 bytes"}

Expected results:

No matter how many IngressController is created, secret management taken care by Operators need to work, even if data exceed 1 MB size limitation. In that case an approach needs to exist to split data into multiple secrets or handle it otherwise.

Additional info:

 

This is a clone of issue OCPBUGS-17862. The following is the description of the original issue:

This is a clone of issue OCPBUGS-17769. The following is the description of the original issue:

This is a clone of issue OCPBUGS-17568. The following is the description of the original issue:

Description of problem:

 

Customer used Agent-based installer to install 4.13.8 on they CID env, but during install process, the bootstrap machine had oom issue, check sosreport find the init container had oom issue

NOTE: Issue is not see when testing with 4.13.6, per the customer

initContainers:

  • name: machine-config-controller
    image: .Images.MachineConfigOperator
    command: ["/usr/bin/machine-config-controller"]
    args:
  • "bootstrap"
  • "--manifest-dir=/etc/mcc/bootstrap"
  • "--dest-dir=/etc/mcs/bootstrap"
  • "--pull-secret=/etc/mcc/bootstrap/machineconfigcontroller-pull-secret"
  • "--payload-version=.ReleaseVersion"
    resources:
    limits:
    memory: 50Mi

we found the sosreport dmesg and crio logs had oom kill machine-config-controller container issue, the issue was cause by cgroup kill, so looks like the limit 50M is too small

The customer used a physical machine that had 100GB of memory

the customer had some network config in asstant install yaml file, maybe the issue is them had some nic config?

log files:
1. sosreport
https://attachments.access.redhat.com/hydra/rest/cases/03578865/attachments/b5501734-60be-4de4-adcf-da57e22cbb8e?usePresignedUrl=true

2. asstent installer yaml file
https://attachments.access.redhat.com/hydra/rest/cases/03578865/attachments/a32635cf-112d-49ed-828c-4501e95a0e7a?usePresignedUrl=true

3. bootstrap machine oom screenshot
https://attachments.access.redhat.com/hydra/rest/cases/03578865/attachments/eefe2e57-cd23-4abd-9e0b-dd45f20a34d2?usePresignedUrl=true

This is a clone of issue OCPBUGS-4696. The following is the description of the original issue:

Description of problem:

metal3 pod does not come up on SNO when creating Provisioning with provisioningNetwork set to Disabled

The issue is that on SNO, there is no Machine, and no BareMetalHost, it is looking of Machine objects to populate the provisioningMacAddresses field. However, when provisioningNetwork is Disabled, provisioningMacAddresses is not used anyway.

You can work around this issue by populating provisioningMacAddresses with a dummy address, like this:

kind: Provisioning
metadata:
  name: provisioning-configuration
spec:
  provisioningMacAddresses:
  - aa:aa:aa:aa:aa:aa
  provisioningNetwork: Disabled
  watchAllNamespaces: true

Version-Release number of selected component (if applicable):

4.11.17

How reproducible:

Try to bring up Provisioning on SNO in 4.11.17 with provisioningNetwork set to Disabled

apiVersion: metal3.io/v1alpha1
kind: Provisioning
metadata:
  name: provisioning-configuration
spec:
  provisioningNetwork: Disabled
  watchAllNamespaces: true

Steps to Reproduce:

1.
2.
3.

Actual results:

controller/provisioning "msg"="Reconciler error" "error"="machines with cluster-api-machine-role=master not found" "name"="provisioning-configuration" "namespace"="" "reconciler group"="metal3.io" "reconciler kind"="Provisioning"

Expected results:

metal3 pod should be deployed

Additional info:

This issue is a result of this change: https://github.com/openshift/cluster-baremetal-operator/pull/307
See this Slack thread: https://coreos.slack.com/archives/CFP6ST0A3/p1670530729168599

Just like kube proxy, ovnk should expose port 10256 on every node, so that cloud LBs can send health checks and know which nodes are available. This is relevant for services with externalTrafficPolicy=Cluster.

Description of problem:

go test -mod=vendor -test.v -race  github.com/ovn-org/ovn-kubernetes/go-controller/pkg/libovsdbops
# github.com/ovn-org/ovn-kubernetes/go-controller/pkg/libovsdbops [github.com/ovn-org/ovn-kubernetes/go-controller/pkg/libovsdbops.test]
pkg/libovsdbops/acl_test.go:98:15: undefined: FindACLs
pkg/libovsdbops/acl_test.go:105:15: undefined: UpdateACLsOps
FAIL    github.com/ovn-org/ovn-kubernetes/go-controller/pkg/libovsdbops [build failed]
FAIL

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

This is a clone of issue OCPBUGS-3235. The following is the description of the original issue:

Description of problem:

Frequently we see the loading state of the topology view, even when there aren't many resources in the project.

Including an example

Prerequisites (if any, like setup, operators/versions):

Steps to Reproduce

  1. load topology
  2. if it loads successfully, keep trying  until it fails to load

Actual results:

topology will sometimes hang with the loading indicator showing indefinitely

Expected results:

topology should load consistently without fail

Reproducibility (Always/Intermittent/Only Once):

intermittent

Build Details:

4.9

Additional info:

This is a clone of issue OCPBUGS-5100. The following is the description of the original issue:

This is a clone of issue OCPBUGS-5068. The following is the description of the original issue:

Description of problem:

virtual media provisioning fails when iLO Ironic driver is used

Version-Release number of selected component (if applicable):

4.13

How reproducible:

Always

Steps to Reproduce:

1. attempt virtual media provisioning on a node configured with ilo-virtualmedia:// drivers
2.
3.

Actual results:

Provisioning fails with "An auth plugin is required to determine endpoint URL" error

Expected results:

Provisioning succeeds

Additional info:

Relevant log snippet:

3742 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector [None req-e58ac1f2-fac6-4d28-be9e-983fa900a19b - - - - - -] Unable to start managed inspection for node e4445d43-3458-4cee-9cbe-6da1de75      78cd: An auth plugin is required to determine endpoint URL: keystoneauth1.exceptions.auth_plugins.MissingAuthPlugin: An auth plugin is required to determine endpoint URL
 3743 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector Traceback (most recent call last):
 3744 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic/drivers/modules/inspector.py", line 210, in _start_managed_inspection
 3745 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     task.driver.boot.prepare_ramdisk(task, ramdisk_params=params)
 3746 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic_lib/metrics.py", line 59, in wrapped
 3747 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     result = f(*args, **kwargs)
 3748 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic/drivers/modules/ilo/boot.py", line 408, in prepare_ramdisk
 3749 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     iso = image_utils.prepare_deploy_iso(task, ramdisk_params,
 3750 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic/drivers/modules/image_utils.py", line 624, in prepare_deploy_iso
 3751 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     return prepare_iso_image(inject_files=inject_files)
 3752 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic/drivers/modules/image_utils.py", line 537, in _prepare_iso_image
 3753 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     image_url = img_handler.publish_image(
 3754 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic/drivers/modules/image_utils.py", line 193, in publish_image
 3755 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     swift_api = swift.SwiftAPI()
 3756 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector   File "/usr/lib/python3.9/site-packages/ironic/common/swift.py", line 66, in __init__
 3757 2022-12-19T19:02:05.997747170Z 2022-12-19 19:02:05.995 1 ERROR ironic.drivers.modules.inspector     endpoint = keystone.get_endpoint('swift', session=session)

In order to delete the correct GCP cloud resources, the "--credentials-requests-dir" parameter must be passed to "ccoctl gcp delete". This was fixed for 4.12 as part of https://github.com/openshift/cloud-credential-operator/pull/489 but must be backported for previous releases. See https://github.com/openshift/cloud-credential-operator/pull/489#issuecomment-1248733205 for discussion regarding this bug.

To reproduce, create GCP infrastructure with a name parameter that is a subset of another set of GCP infrastructure's name parameter. I will "ccoctl gcp create all" with "name=abutcher-gcp" and "name=abutcher-gcp1".

$ ./ccoctl gcp create-all \
--name=abutcher-gcp \
--region=us-central1 \
--project=openshift-hive-dev \
--credentials-requests-dir=./credrequests

$ ./ccoctl gcp create-all \
--name=abutcher-gcp1 \
--region=us-central1 \
--project=openshift-hive-dev \
--credentials-requests-dir=./credrequests

Running "ccoctl gcp delete --name=abutcher-gcp" will result in GCP infrastructure for both "abutcher-gcp" and "abutcher-gcp1" being deleted. 

$ ./ccoctl gcp delete --name abutcher-gcp --project openshift-hive-dev
2022/10/24 11:30:06 Credentials loaded from file "/home/abutcher/.gcp/osServiceAccount.json"
2022/10/24 11:30:06 Deleted object .well-known/openid-configuration from bucket abutcher-gcp-oidc
2022/10/24 11:30:07 Deleted object keys.json from bucket abutcher-gcp-oidc
2022/10/24 11:30:07 OIDC bucket abutcher-gcp-oidc deleted
2022/10/24 11:30:09 IAM Service account abutcher-gcp-openshift-image-registry-gcs deleted
2022/10/24 11:30:10 IAM Service account abutcher-gcp-openshift-gcp-ccm deleted
2022/10/24 11:30:11 IAM Service account abutcher-gcp1-openshift-cloud-network-config-controller-gcp deleted
2022/10/24 11:30:12 IAM Service account abutcher-gcp-openshift-machine-api-gcp deleted
2022/10/24 11:30:13 IAM Service account abutcher-gcp-openshift-ingress-gcp deleted
2022/10/24 11:30:15 IAM Service account abutcher-gcp-openshift-gcp-pd-csi-driver-operator deleted
2022/10/24 11:30:16 IAM Service account abutcher-gcp1-openshift-ingress-gcp deleted
2022/10/24 11:30:17 IAM Service account abutcher-gcp1-openshift-image-registry-gcs deleted
2022/10/24 11:30:19 IAM Service account abutcher-gcp-cloud-credential-operator-gcp-ro-creds deleted
2022/10/24 11:30:20 IAM Service account abutcher-gcp1-openshift-gcp-pd-csi-driver-operator deleted
2022/10/24 11:30:21 IAM Service account abutcher-gcp1-openshift-gcp-ccm deleted
2022/10/24 11:30:22 IAM Service account abutcher-gcp1-cloud-credential-operator-gcp-ro-creds deleted
2022/10/24 11:30:24 IAM Service account abutcher-gcp1-openshift-machine-api-gcp deleted
2022/10/24 11:30:25 IAM Service account abutcher-gcp-openshift-cloud-network-config-controller-gcp deleted
2022/10/24 11:30:25 Workload identity pool abutcher-gcp deleted

 

Description of problem:

The ovn-kubernetes ovnkube-master containers are continuously crashlooping since we updated to 4.11.0-0.okd-2022-10-15-073651.

Log Excerpt:

] [] []  [{kubectl-client-side-apply Update networking.k8s.io/v1 2022-09-12 12:25:06 +0000 UTC FieldsV1 {"f:metadata":{"f:annotations":{".":{},"f:kubectl.kubernetes.io/last-applied-configuration":{}}},"f:spec":{"f:ingress":{},"f:policyTypes":{}}} }]},Spec:NetworkPolicySpec{PodSelector:{map[] []},Ingress:[]NetworkPolicyIngressRule{NetworkPolicyIngressRule{Ports:[]NetworkPolicyPort{},From:[]NetworkPolicyPeer{NetworkPolicyPeer{PodSelector:&v1.LabelSelector{MatchLabels:map[string]string{access: true,},MatchExpressions:[]LabelSelectorRequirement{},},NamespaceSelector:nil,IPBlock:nil,},},},},Egress:[]NetworkPolicyEgressRule{},PolicyTypes:[Ingress],},} &NetworkPolicy{ObjectMeta:{allow-from-openshift-ingress  compsci-gradcentral  a405f843-c250-40d7-8dd4-a759f764f091 217304038 1 2022-09-22 14:36:38 +0000 UTC <nil> <nil> map[] map[] [] []  [{openshift-apiserver Update networking.k8s.io/v1 2022-09-22 14:36:38 +0000 UTC FieldsV1 {"f:spec":{"f:ingress":{},"f:policyTypes":{}}} }]},Spec:NetworkPolicySpec{PodSelector:{map[] []},Ingress:[]NetworkPolicyIngressRule{NetworkPolicyIngressRule{Ports:[]NetworkPolicyPort{},From:[]NetworkPolicyPeer{NetworkPolicyPeer{PodSelector:nil,NamespaceSelector:&v1.LabelSelector{MatchLabels:map[string]string{policy-group.network.openshift.io/ingress: ,},MatchExpressions:[]LabelSelectorRequirement{},},IPBlock:nil,},},},},Egress:[]NetworkPolicyEgressRule{},PolicyTypes:[Ingress],},}]: cannot clean up egress default deny ACL name: error in transact with ops [{Op:mutate Table:Port_Group Row:map[] Rows:[] Columns:[] Mutations:[{Column:acls Mutator:delete Value:{GoSet:[{GoUUID:60cb946a-46e9-4623-9ba4-3cb35f018ed6}]}}] Timeout:<nil> Where:[where column _uuid == {ccdd01bf-3009-42fb-9672-e1df38190cd7}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:} {Op:mutate Table:Port_Group Row:map[] Rows:[] Columns:[] Mutations:[{Column:acls Mutator:delete Value:{GoSet:[{GoUUID:60cb946a-46e9-4623-9ba4-3cb35f018ed6}]}}] Timeout:<nil> Where:[where column _uuid == {10bbf229-8c1b-4c62-b36e-4ba0097722db}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:} {Op:delete Table:ACL Row:map[] Rows:[] Columns:[] Mutations:[] Timeout:<nil> Where:[where column _uuid == {7b55ba0c-150f-4a63-9601-cfde25f29408}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:} {Op:delete Table:ACL Row:map[] Rows:[] Columns:[] Mutations:[] Timeout:<nil> Where:[where column _uuid == {60cb946a-46e9-4623-9ba4-3cb35f018ed6}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:}] results [{Count:1 Error: Details: UUID:{GoUUID:} Rows:[]} {Count:1 Error: Details: UUID:{GoUUID:} Rows:[]} {Count:1 Error: Details: UUID:{GoUUID:} Rows:[]} {Count:1 Error: Details: UUID:{GoUUID:} Rows:[]} {Count:0 Error:referential integrity violation Details:cannot delete ACL row 7b55ba0c-150f-4a63-9601-cfde25f29408 because of 1 remaining reference(s) UUID:{GoUUID:} Rows:[]}] and errors []: referential integrity violation: cannot delete ACL row 7b55ba0c-150f-4a63-9601-cfde25f29408 because of 1 remaining reference(s)

Additional info:

https://github.com/okd-project/okd/issues/1372

Issue persisted through update to 4.11.0-0.okd-2022-10-28-153352

must-gather: https://nbc9-snips.cloud.duke.edu/snips/must-gather.local.2859117512952590880.zip

Description of problem:

Users search a resource (for example, Pod) with Name filter applied and input a text to the filter field then the search results filtered accordingly. 

Once the results are shown, when the user clear the value in one-shot (i.e. select whole filter text from the field and clear it using delete or backspace key) from the field, 

then the search result doesn't clear accordingly and the previous result stays on the page.

Version-Release number of selected components (if applicable):

4.11.0-0.nightly-2022-08-16-194731 & works fine with OCP 4.12 latest version.

How reproducible:

 Always

Steps to Reproduce:

  1. Login to OCP web console.
  2. Go to the Search section.
  3. Select the resource filter and choose a resource (for example , Pod)
  4. Change the filter option to "Name" and input a text( for example, installer) to the filter field.
  5. Once the results are shown, select the whole filter text ( i.e. installer).
  6. Clear the text using the Delete or Backspace key.
  7. View the behavior on search results

Actual results:

Search result doesn't clear when user clears name filter in one-shot for any resources.

Expected results:

Search results should clear when the user clears name filters in one-shot for any resources.

Additional info:

Reproduced in both chrome[103.0.5060.114 (Official Build) (64-bit)] and firefox[91.11.0esr (64-bit)] browsers.

Attached screen share for the same issue. SearchIssues.mp4

Description of problem:

 

When creating a ProjectHelmChartRepository (with or without the form) and setting a display name (as `spec.name`), this value is not used in the developer catalog / Helm Charts catalog filter sidebar.

It shows (and watches) the display names of `HelmChartRepository` resources.

Version-Release number of selected component (if applicable):

4.11

How reproducible:

Always

Steps to Reproduce:

1. Switch to Developer Perspective
2. Navigate to Add > "Helm Chart repositories"
3. Enter "ibm-charts" as "Chart repository name"
4. Enter URL https://raw.githubusercontent.com/IBM/charts/master/repo/community/index.yaml as URL)
5. Press on create
6. Open the YAML editor and change the `spec.name` attribute to "IBM Charts"
7. Save the change
8. Navigate to Add > "Helm Chart" 

Actual results:

The filter navigation on the left side shows "Chart Repositories" "Ibm Chart". A camel case version of the resource name.

Expected results:

It should show the "spec.name" "IBM Charts" if defined and fallback to the current implementation if the optional spec.name is not defined.

Additional info:

There is a bug discussing that the display name could not be entered directly, https://bugzilla.redhat.com/show_bug.cgi?id=2106366. This bug here is only about the catalog output.

 

This is a clone of issue OCPBUGS-3265. The following is the description of the original issue:

This is a clone of issue OCPBUGS-3172. The following is the description of the original issue:

Customer is trying to install the Logging operator, which appears to attempt to install a dynamic plugin. The operator installation fails in the console because permissions aren't available to "patch resource consoles".

We shouldn't block operator installation if permission issues prevent dynamic plugin installation.

This is an OSD cluster, presumably for a customer with "cluster-admin", although it may be a paired down permission set called "dedicated-admin".

See https://docs.google.com/document/d/1hYS-bm6aH7S6z7We76dn9XOFcpi9CGYcGoJys514YSY/edit for permissions investigation work on OSD

Description of problem:

When trying to add a Cisco UCS Rackmount server as a `baremetalhost` CR the following error comes up in the metal3 container log in the openshift-machine-api namespace.

'TransferProtocolType' property which is mandatory to complete the action is missing in the request body

Full log entry:

{"level":"info","ts":1677155695.061805,"logger":"provisioner.ironic","msg":"current provision state","host":"ucs-rackmounts~ocp-test-1","lastError":"Deploy step deploy.deploy failed with BadRequestError: HTTP POST https://10.5.4.78/redfish/v1/Managers/CIMC/VirtualMedia/0/Actions/VirtualMedia.InsertMedia returned code 400. Base.1.4.0.GeneralError: 'TransferProtocolType' property which is mandatory to complete the action is missing in the request body. Extended information: [{'@odata.type': 'Message.v1_0_6.Message', 'MessageId': 'Base.1.4.0.GeneralError', 'Message': "'TransferProtocolType' property which is mandatory to complete the action is missing in the request body.", 'MessageArgs': [], 'Severity': 'Critical'}].","current":"deploy failed","target":"active"}

Version-Release number of selected component (if applicable):

    image: quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:30328143480d6598d0b52d41a6b755bb0f4dfe04c4b7aa7aefd02ea793a2c52b
    imagePullPolicy: IfNotPresent
    name: metal3-ironic

How reproducible:

Adding a Cisco UCS Rackmount with Redfish enabled as a baremetalhost to metal3

Steps to Reproduce:

1. The address to use: redfish-virtualmedia://10.5.4.78/redfish/v1/Systems/WZP22100SBV

Actual results:

[baelen@baelen-jumphost mce]$ oc get baremetalhosts.metal3.io  -n ucs-rackmounts  ocp-test-1
NAME         STATE          CONSUMER   ONLINE   ERROR                AGE
ocp-test-1   provisioning              true     provisioning error   23h

Expected results:

For the provisioning to be successfull.

Additional info:

 

This is a clone of issue OCPBUGS-5019. The following is the description of the original issue:

This is a clone of issue OCPBUGS-4941. The following is the description of the original issue:

Description of problem: This is a follow-up to OCPBUGS-3933.

The installer fails to destroy the cluster when the OpenStack object storage omits 'content-type' from responses, and a container is empty.

Version-Release number of selected component (if applicable):

4.8.z

How reproducible:

Likely not happening in customer environments where Swift is exposed directly. We're seeing the issue in our CI where we're using a non-RHOSP managed cloud.

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

When a thin provisioned COW format disk is created on OCP on RHV via CSI driver (a PVC -
https://github.com/openshift/ovirt-csi-driver/blob/master/deploy/example/storage-claim.yaml

  • with for example requested storage 100 GB), the go-ovirt-client behaviour makes it so that the created disk has virtual size 100 GB and it's actual size is 110 GB.

But this is thin provisioned disk, so the initial size of the disk should be default of the engine and then grow as needed, it shouldn't be this big.

This causes all the disks created this way to be functionally preallocated (since it eats all that space), which is a real waste of space.

How reproducible: 100%

Steps to Reproduce:
1. Create a storage claim (PVC) in Openshift (
https://github.com/openshift/ovirt-csi-driver/blob/master/deploy/example/storage-claim.yaml
) using the default storage class (or any other storage class with thinProvisioning: "true") and with requested storage i.e. 100Gi

$ oc create -f storage-claim.yaml

2. In the RHV web console navigate to Storage -> Disks and check Virtual size and Actual size of the created disk (PVC)

Actual results:
Disk from our example with requested storage 100GB reports virtual size 100GB and actual size 110 GB.

Expected results:
Thin provisioned disks should start with small initial size and then grow as needed, so its actual size should be considerably smaller (the default initial size set by the engine should be 2.5 GB if I'm not mistaken).

Note: The extra 10GB in the actual size are caused by overhead for the qcow2 disk format, which is 10%, and this was tracked here as a separate issue:
https://bugzilla.redhat.com/show_bug.cgi?id=2097139

This is a clone of issue OCPBUGS-10314. The following is the description of the original issue:

This is a clone of issue OCPBUGS-8741. The following is the description of the original issue:

This is a clone of issue OCPBUGS-5889. The following is the description of the original issue:

Description of problem:

Customer running a cluster with following config:
4.10.23
AWS/IPI
OVNKubernetes

Observed that in namespace with networkpolicy rules enabled, and a policy for allow-from-same namespace, pods will have different behaviors when calling service IP's hosted in that same namespace.

Example:
Deployment1 with two pods (A/B) exists in namespace <EXAMPLE>
Deployment2 with 1 pod hosting a service and route exists in same namespace
Pod A will unexpectedly stop being able to call service IP of deployment2; Pod B will never lose access to calling service IP of deployment2.

Pod A remains able to call out through br-ex interface, tag the ROUTE address, and reach deployment2 pod via haproxy (this never breaks)

Pod A remains able to reach the local gateway on the node

Host node for Pod A is able to reach the service IP of deployment2 and remains able to do so, even while pod A is impacted.

Issue can be mitigated by applying a label or annotation to pod A, which immediately allows it to reach internal service IPs again within the namespace.

I suspect that the issue is to do with the networkpolicy rules failing to stay updated on the pod object, and the pod needs to be 'refreshed' --> label appendation/other update, to force the pod to 'remember' that it is allowed to call peers within the namespace.

Additional relevant data:
- pods affects throughout cluster; no specific project/service/deployment/application
- pods ride on different nodes all the time (no one node affected)
- pods with fail condition are on same node with other pods without issue
- multiple namespaces see this problem
- all namespaces are using similar networkpolicy isolation and allow-from-same-namespace ruleset (which matches our documentation on syntax).



Version-Release number of selected component (if applicable):

4.10.23

How reproducible:

every time --> unclear what the trigger is that causes this; pods will be functional and several hours/days later, will stop being able to talk to peer services.

Steps to Reproduce:

1. deploy pod with at least two replicas in a namespace with allow-from same network policy
2. deploy a different service and route example httpd instance in same namespace
3. observe that one of the two pods may fail to reach service IP after some time
4. apply annotation to pod and it is immediately able to reach services again.

Actual results:

pods intermittently fail to reach internal service addresses, but are able to be interacted with otherwise, and can reach upstream/external addresses including routes on cluster. 

Expected results:

pods should not lose access to service network peers. 

Additional info:

see next comments for relevant uploads/sosreports and inspects.

This is a clone of issue OCPBUGS-11972. The following is the description of the original issue:

This is a clone of issue OCPBUGS-9956. The following is the description of the original issue:

Description of problem:

PipelineRun default template name has been updated in the backend in Pipeline operator 1.10, So we need to update the name in the UI code as well.

 

https://github.com/openshift/console/blob/master/frontend/packages/pipelines-plugin/src/components/pac/const.ts#L9

 

This is a clone of issue OCPBUGS-9955. The following is the description of the original issue:

Description of problem:

OCP cluster installation (SNO) using assisted installer running on ACM hub cluster. 
Hub cluster is OCP 4.10.33
ACM is 2.5.4

When a cluster fails to install we remove the installation CRs and cluster namespace from the hub cluster (to eventually redeploy). The termination of the namespace hangs indefinitely (14+ hours) with finalizers remaining. 

To resolve the hang we can remove the finalizers by editing both the secret pointed to by BareMetalHost .spec.bmc.credentialsName and BareMetalHost CR. When these finalizers are removed the namespace termination completes within a few seconds.

Version-Release number of selected component (if applicable):

OCP 4.10.33
ACM 2.5.4

How reproducible:

Always

Steps to Reproduce:

1. Generate installation CRs (AgentClusterInstall, BMH, ClusterDeployment, InfraEnv, NMStateConfig, ...) with an invalid configuration parameter. Two scenarios validated to hit this issue:
  a. Invalid rootDeviceHint in BareMetalHost CR
  b. Invalid credentials in the secret referenced by BareMetalHost.spec.bmc.credentialsName
2. Apply installation CRs to hub cluster
3. Wait for cluster installation to fail
4. Remove cluster installation CRs and namespace

Actual results:

Cluster namespace remains in terminating state indefinitely:
$ oc get ns cnfocto1
NAME       STATUS        AGE    
cnfocto1   Terminating   17h

Expected results:

Cluster namespace (and all installation CRs in it) are successfully removed.

Additional info:

The installation CRs are applied to and removed from the hub cluster using argocd. The CRs have the following waves applied to them which affects the creation order (lowest to highest) and removal order (highest to lowest):
Namespace: 0
AgentClusterInstall: 1
ClusterDeployment: 1
NMStateConfig: 1
InfraEnv: 1
BareMetalHost: 1
HostFirmwareSettings: 1
ConfigMap: 1 (extra manifests)
ManagedCluster: 2
KlusterletAddonConfig: 2

 

This is a clone of issue OCPBUGS-7800. The following is the description of the original issue:

This is a clone of issue OCPBUGS-266. The following is the description of the original issue:

Description of problem: I am working with a customer who uses the web console.  From the Developer Perspective's Project Access tab, they cannot differentiate between users and groups and furthermore cannot add groups from this web console.  This has led to confusion whether existing resources were in fact users or groups, and furthermore they have added users when they intended to add groups instead.  What we really need is a third column in the Project Access tab that says whether a resource is a user or group.

 

Version-Release number of selected component (if applicable): This is an issue in OCP 4.10 and 4.11, and I presume future versions as well

How reproducible: Every time.  My customer is running on ROSA, but I have determined this issue to be general to OpenShift.

Steps to Reproduce:

From the oc cli, I create a group and add a user to it.

$ oc adm groups new techlead
group.user.openshift.io/techlead created
$ oc adm groups add-users techlead admin
group.user.openshift.io/techlead added: "admin"
$ oc get groups
NAME                                     USERS
cluster-admins                           
dedicated-admins                         admin
techlead   admin
I create a new namespace so that I can assign a group project level access:

$ oc new-project my-namespace

$ oc adm policy add-role-to-group edit techlead -n my-namespace
I then went to the web console -> Developer perspective -> Project -> Project Access.  I verified the rolebinding named 'edit' is bound to a group named 'techlead'.

$ oc get rolebinding
NAME                                                              ROLE                                   AGE
admin                                                             ClusterRole/admin                      15m
admin-dedicated-admins                                            ClusterRole/admin                      15m
admin-system:serviceaccounts:dedicated-admin                      ClusterRole/admin                      15m
dedicated-admins-project-dedicated-admins                         ClusterRole/dedicated-admins-project   15m
dedicated-admins-project-system:serviceaccounts:dedicated-admin   ClusterRole/dedicated-admins-project   15m
edit                                                              ClusterRole/edit                       2m18s
system:deployers                                                  ClusterRole/system:deployer            15m
system:image-builders                                             ClusterRole/system:image-builder       15m
system:image-pullers                                              ClusterRole/system:image-puller        15m

$ oc get rolebinding edit -o yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  creationTimestamp: "2022-08-15T14:16:56Z"
  name: edit
  namespace: my-namespace
  resourceVersion: "108357"
  uid: 4abca27d-08e8-43a3-b9d3-d20d5c294bbe
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: edit
subjects:

  • apiGroup: rbac.authorization.k8s.io
      kind: Group
      name: techlead
    Now, from the same Project Access tab in the web console, I added the developer with role "View".  From this web console, it is unclear whether developer and techlead are users or groups.

Now back to the CLI, I view the newly created rolebinding named 'developer-view-c15b720facbc8deb', and find that the "View" role is assigned to a user named 'developer', rather than a group.

$ oc get rolebinding                                                                      
NAME                                                              ROLE                                   AGE
admin                                                             ClusterRole/admin                      17m
admin-dedicated-admins                                            ClusterRole/admin                      17m
admin-system:serviceaccounts:dedicated-admin                      ClusterRole/admin                      17m
dedicated-admins-project-dedicated-admins                         ClusterRole/dedicated-admins-project   17m
dedicated-admins-project-system:serviceaccounts:dedicated-admin   ClusterRole/dedicated-admins-project   17m
edit                                                              ClusterRole/edit                       4m25s
developer-view-c15b720facbc8deb     ClusterRole/view                       90s
system:deployers                                                  ClusterRole/system:deployer            17m
system:image-builders                                             ClusterRole/system:image-builder       17m
system:image-pullers                                              ClusterRole/system:image-puller        17m
[10:21:21] kechung:~ $ oc get rolebinding developer-view-c15b720facbc8deb -o yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  creationTimestamp: "2022-08-15T14:19:51Z"
  name: developer-view-c15b720facbc8deb
  namespace: my-namespace
  resourceVersion: "113298"
  uid: cc2d1b37-922b-4e9b-8e96-bf5e1fa77779
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: view
subjects:

  • apiGroup: rbac.authorization.k8s.io
      kind: User
      name: developer

So in conclusion, from the Project Access tab, we're unable to add groups and unable to differentiate between users and groups.  This is in essence our ask for this RFE.

 

Actual results:

Developer perspective -> Project -> Project Access tab shows a list of resources which can be users or groups, but does not differentiate between them.  Furthermore, when we add resources, they are only users and there is no way to add a group from this tab in the web console.

 

Expected results:

Should have the ability to add groups and differentiate between users and groups.  Ideally, we're looking at a third column for user or group.

 

Additional info:

Description of problem:

Provisioning interface on master node not getting ipv4 dhcp ip address from bootstrap dhcp server on OCP 4.10.16 IPI BareMetal install.

Customer is performing an OCP 4.10.16 IPI BareMetal install and bootstrap node provisions just fine, but when master nodes are booted for provisioning, they are not getting an ipv4 address via dhcp. As such, the install is not moving forward at this point.

Version-Release number of selected component (if applicable):

OCP 4.10.16

How reproducible:

Perform OCP 4.10.16 IPI BareMetal install.

Actual results:

provisioning interface comes up (as evidenced by ipv6 address) but is not getting an ipv4 address via dhcp. OCP install / provisioning fails at this point.

Expected results:

provisioning interface successfully received an ipv4 ip address and successfully provisioned master nodes (and subsequently worker nodes as well.)

Additional info:

As a troubleshooting measure, manually adding an ipv4 ip address did allow the coreos image on the bootstrap node to be reached via curl.

Further, the kernel boot line for the first master node was updated for a static ip addresss assignment for further confirmation that the master node would successfully image this way which further confirming that the issue is the provisioning interface not receiving an ipv4 ip address from the dhcp server.

Description of problem:

The test local-test is failing on openshift/thanos when upgrading golang version to 1.18 on the branch release-4.11.

Please refer to this test log for details:
https://prow.ci.openshift.org/view/gs/origin-ci-test/pr-logs/pull/openshift_thanos/82/pull-ci-openshift-thanos-release-4.11-test-local/1541516614497734656

Version-Release number of selected component (if applicable):

4.11

How reproducible:

See local-test job on pull request on the repository Openshift/Thanos

Steps to Reproduce:


Actual results:

local-test fails on the following error:
level=error ts=2022-06-27T20:28:12.306Z caller=web.go:99 component=web msg="panic while serving request" client=127.0.0.1:37064 url=/api/v1/metadata err="runtime error: invalid memory address or nil pointer dereference" stack="goroutine 278 [running]:\ngithub.com/prometheus/prometheus/web.withStackTracer.func1.1()\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/web/web.go:98 +0x99\npanic({0x1c34760, 0x308ad40})\n\t/usr/lib/golang/src/runtime/panic.go:838 +0x207\nreflect.mapiternext(0xc000458540?)\n\t/usr/lib/golang/src/runtime/map.go:1378 +0x19\ngithub.com/modern-go/reflect2.(*UnsafeMapIterator).UnsafeNext(0x1bd62e0?)\n\t/go/pkg/mod/github.com/modern-go/reflect2@v1.0.1/unsafe_map.go:136 +0x32\ngithub.com/json-iterator/go.(*sortKeysMapEncoder).Encode(0xc000949d10, 0xc0002966b0, 0xc0006c7740)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect_map.go:297 +0x31a\ngithub.com/json-iterator/go.(*onePtrEncoder).Encode(0xc0008cb120, 0xc000948fc0, 0xc0001139c0?)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect.go:219 +0x82\ngithub.com/json-iterator/go.(*Stream).WriteVal(0xc0006c7740, {0x1c16da0, 0xc000948fc0})\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect.go:98 +0x158\ngithub.com/json-iterator/go.(*dynamicEncoder).Encode(0xc00094cd58?, 0xfa9a07?, 0xc0006c7758?)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect_dynamic.go:15 +0x39\ngithub.com/json-iterator/go.(*structFieldEncoder).Encode(0xc000949620, 0x1a4aaba?, 0xc0006c7740)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect_struct_encoder.go:110 +0x56\ngithub.com/json-iterator/go.(*structEncoder).Encode(0xc000949740, 0x0?, 0xc0006c7740)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect_struct_encoder.go:158 +0x652\ngithub.com/json-iterator/go.(*OptionalEncoder).Encode(0xc0001afd60?, 0x0?, 0x0?)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect_optional.go:74 +0xa4\ngithub.com/json-iterator/go.(*onePtrEncoder).Encode(0xc0008cad40, 0xc0006c76e0, 0xc000949020?)\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect.go:219 +0x82\ngithub.com/json-iterator/go.(*Stream).WriteVal(0xc0006c7740, {0x1ac56e0, 0xc0006c76e0})\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/reflect.go:98 +0x158\ngithub.com/json-iterator/go.(*frozenConfig).Marshal(0xc0001afd60, {0x1ac56e0, 0xc0006c76e0})\n\t/go/pkg/mod/github.com/json-iterator/go@v1.1.9/config.go:299 +0xc9\ngithub.com/prometheus/prometheus/web/api/v1.(*API).respond(0xc0002d7a40, {0x229a448, 0xc00022bd60}, {0x1c16da0?, 0xc000948fc0}, {0x0?, 0x7fe5a05a5b20?, 0x20?})\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/web/api/v1/api.go:1437 +0x162\ngithub.com/prometheus/prometheus/web/api/v1.(*API).Register.func1.1({0x229a448, 0xc00022bd60}, 0x7fe5982c5300?)\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/web/api/v1/api.go:273 +0x20b\nnet/http.HandlerFunc.ServeHTTP(0x7fe5982c5300?, {0x229a448?, 0xc00022bd60?}, 0xc00072b270?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\ngithub.com/prometheus/prometheus/util/httputil.CompressionHandler.ServeHTTP({{0x2290780?, 0xc000856288?}}, {0x7fe5982c5300?, 0xc00072b270?}, 0x228fb20?)\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/util/httputil/compression.go:90 +0x69\ngithub.com/prometheus/prometheus/web.(*Handler).testReady.func1({0x7fe5982c5300?, 0xc00072b270?}, 0x7fe5982c5300?)\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/web/web.go:499 +0x39\nnet/http.HandlerFunc.ServeHTTP(0x7fe5982c5300?, {0x7fe5982c5300?, 0xc00072b270?}, 0x50?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\ngithub.com/prometheus/client_golang/prometheus/promhttp.InstrumentHandlerResponseSize.func1({0x7fe5982c5300?, 0xc00072b220?}, 0xc000250c00)\n\t/go/pkg/mod/github.com/prometheus/client_golang@v1.6.0/prometheus/promhttp/instrument_server.go:196 +0xa5\nnet/http.HandlerFunc.ServeHTTP(0x228fb80?, {0x7fe5982c5300?, 0xc00072b220?}, 0xc000948ed0?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\ngithub.com/prometheus/client_golang/prometheus/promhttp.InstrumentHandlerDuration.func2({0x7fe5982c5300, 0xc00072b220}, 0xc000250c00)\n\t/go/pkg/mod/github.com/prometheus/client_golang@v1.6.0/prometheus/promhttp/instrument_server.go:76 +0xa2\nnet/http.HandlerFunc.ServeHTTP(0x22a4a68?, {0x7fe5982c5300?, 0xc00072b220?}, 0x0?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\ngithub.com/prometheus/client_golang/prometheus/promhttp.InstrumentHandlerCounter.func1({0x22a4a68?, 0xc00072b1d0?}, 0xc000250c00)\n\t/go/pkg/mod/github.com/prometheus/client_golang@v1.6.0/prometheus/promhttp/instrument_server.go:100 +0x94\ngithub.com/prometheus/prometheus/web.setPathWithPrefix.func1.1({0x22a4a68, 0xc00072b1d0}, 0xc000250b00)\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/web/web.go:1142 +0x290\ngithub.com/prometheus/common/route.(*Router).handle.func1({0x22a4a68, 0xc00072b1d0}, 0xc000250a00, {0x0, 0x0, 0xc00022c364?})\n\t/go/pkg/mod/github.com/prometheus/common@v0.10.0/route/route.go:83 +0x2ae\ngithub.com/julienschmidt/httprouter.(*Router).ServeHTTP(0xc0001cc780, {0x22a4a68, 0xc00072b1d0}, 0xc000250a00)\n\t/go/pkg/mod/github.com/julienschmidt/httprouter@v1.3.0/router.go:387 +0x82b\ngithub.com/prometheus/common/route.(*Router).ServeHTTP(0x8?, {0x22a4a68?, 0xc00072b1d0?}, 0x203000?)\n\t/go/pkg/mod/github.com/prometheus/common@v0.10.0/route/route.go:121 +0x26\nnet/http.StripPrefix.func1({0x22a4a68, 0xc00072b1d0}, 0xc000250900)\n\t/usr/lib/golang/src/net/http/server.go:2127 +0x330\nnet/http.HandlerFunc.ServeHTTP(0x10?, {0x22a4a68?, 0xc00072b1d0?}, 0x7fe5c8423f18?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\nnet/http.(*ServeMux).ServeHTTP(0x413d87?, {0x22a4a68, 0xc00072b1d0}, 0xc000250900)\n\t/usr/lib/golang/src/net/http/server.go:2462 +0x149\ngithub.com/opentracing-contrib/go-stdlib/nethttp.MiddlewareFunc.func5({0x22a3808?, 0xc000a282a0}, 0xc000250200)\n\t/go/pkg/mod/github.com/opentracing-contrib/go-stdlib@v0.0.0-20190519235532-cf7a6c988dc9/nethttp/server.go:140 +0x662\nnet/http.HandlerFunc.ServeHTTP(0x0?, {0x22a3808?, 0xc000a282a0?}, 0xffffffffffffffff?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\ngithub.com/prometheus/prometheus/web.withStackTracer.func1({0x22a3808?, 0xc000a282a0?}, 0xc0008ca850?)\n\t/go/pkg/mod/github.com/prometheus/prometheus@v1.8.2-0.20200724121523-657ba532e42f/web/web.go:103 +0x97\nnet/http.HandlerFunc.ServeHTTP(0x0?, {0x22a3808?, 0xc000a282a0?}, 0xc000100000?)\n\t/usr/lib/golang/src/net/http/server.go:2084 +0x2f\nnet/http.serverHandler.ServeHTTP({0xc000c55380?}, {0x22a3808, 0xc000a282a0}, 0xc000250200)\n\t/usr/lib/golang/src/net/http/server.go:2916 +0x43b\nnet/http.(*conn).serve(0xc0000d1540, {0x22a4e18, 0xc00061a0c0})\n\t/usr/lib/golang/src/net/http/server.go:1966 +0x5d7\ncreated by net/http.(*Server).Serve\n\t/usr/lib/golang/src/net/http/server.go:3071 +0x4db\n"
level=error ts=2022-06-27T20:28:12.306Z caller=stdlib.go:89 component=web caller="http: panic serving 127.0.0.1:37064" msg="runtime error: invalid memory address or nil pointer dereference"

Expected results:

local-test does no fail on the error above.

Additional info:


This is a clone of issue OCPBUGS-17823. The following is the description of the original issue:

This is a clone of issue OCPBUGS-17813. The following is the description of the original issue:

Description of problem:

GCP bootimage override is not available in 4.13, 4.12 or 4.11

Feature CORS-2445

Version-Release number of selected component (if applicable):{code:none}


How reproducible: Always

Steps to Reproduce:{code:none}
1.
2.
3.

Actual results:


Expected results:


Additional info:


Description of problem:
Users on a fully-disconnected cluster could not see Devfiles in the developer catalog or import a Devfiles. That's fine.

But the API calls /api/devfile/samples/ and /api/devfile/ takes 30 seconds until they fail with a 504 Gateway timeout error.

If possible they should fail immediately.

Version-Release number of selected component (if applicable):
This might happen since 4.8

Tested this yet only on 4.12.0-0.nightly-2022-09-07-112008

How reproducible:
Always

Steps to Reproduce:

  1. Start a disconnected cluster with a proxy
  2. Open the browser network inspector and filter for /api/devfile
  3. Switch to Developer perspective
    1. Navigate to Add > Developer Catalog (All Services) > Devfiles
    2. Or Add > Import from Git > and enter https://github.com/devfile-samples/devfile-sample-go-basic.git

Actual results:

  • Network call fails after 30 seconds
  • Import doesn't work

Expected results:

  • Network calls should fail immediately
  • We doesn't expect that the import will work

Additional info:
The console Pod log contains this error:

E0909 10:28:18.448680 1 devfile-handler.go:74] Failed to parse devfile: failed to populateAndParseDevfile: Get "https://registry.devfile.io/devfiles/go": context deadline exceeded (Client.Timeout exceeded while awaiting headers)

This bug is a backport clone of [Bugzilla Bug 2089950](https://bugzilla.redhat.com/show_bug.cgi?id=2089950). The following is the description of the original bug:

Description of problem: Some upgrades failed during scale testing with messages indicating the console operator is not available. In total 5 out of 2200 clusters failed with this pattern.

These clusters are all configured with the Console operator disabled in order to reduce overall OCP cpu use in the Telecom environment. The following CR is applied:
apiVersion: operator.openshift.io/v1
kind: Console
metadata:
annotations:
include.release.openshift.io/ibm-cloud-managed: "false"
include.release.openshift.io/self-managed-high-availability: "false"
include.release.openshift.io/single-node-developer: "false"
release.openshift.io/create-only: "true"
ran.openshift.io/ztp-deploy-wave: "10"
name: cluster
spec:
logLevel: Normal
managementState: Removed
operatorLogLevel: Normal

From one cluster (sno01175) the ClusterVersion conditions show:

  1. oc get clusterversion version -o jsonpath=' {.status.conditions}

    ' | jq
    [

    { "lastTransitionTime": "2022-05-19T01:44:13Z", "message": "Done applying 4.9.26", "status": "True", "type": "Available" }

    ,

    { "lastTransitionTime": "2022-05-24T14:57:50Z", "message": "Cluster operator console is degraded", "reason": "ClusterOperatorDegraded", "status": "True", "type": "Failing" }

    ,

    { "lastTransitionTime": "2022-05-24T13:49:43Z", "message": "Unable to apply 4.10.13: wait has exceeded 40 minutes for these operators: console", "reason": "ClusterOperatorDegraded", "status": "True", "type": "Progressing" }

    ,

    { "lastTransitionTime": "2022-05-21T02:07:06Z", "status": "True", "type": "RetrievedUpdates" }

    ,

    { "lastTransitionTime": "2022-05-24T13:53:05Z", "message": "Payload loaded version=\"4.10.13\" image=\"quay.io/openshift-release-dev/ocp-release@sha256:4f516616baed3cf84585e753359f7ef2153ae139c2e80e0191902fbd073c4143\"", "reason": "PayloadLoaded", "status": "True", "type": "ReleaseAccepted" }

    ,

    { "lastTransitionTime": "2022-05-24T13:57:05Z", "message": "Cluster operator kube-apiserver should not be upgraded between minor versions: KubeletMinorVersionUpgradeable: Kubelet minor version (1.22.5+5c84e52) on node sno01175 will not be supported in the next OpenShift minor version upgrade.", "reason": "KubeletMinorVersion_KubeletMinorVersionUnsupportedNextUpgrade", "status": "False", "type": "Upgradeable" }

    ]

Another cluster (sno01959) has very similar conditions with slight variation in the Failing and Progressing messages:

{ "lastTransitionTime": "2022-05-24T14:32:42Z", "message": "Cluster operator console is not available", "reason": "ClusterOperatorNotAvailable", "status": "True", "type": "Failing" }

,

{ "lastTransitionTime": "2022-05-24T13:52:04Z", "message": "Unable to apply 4.10.13: the cluster operator console has not yet successfully rolled out", "reason": "ClusterOperatorNotAvailable", "status": "True", "type": "Progressing" }

,

Version-Release number of selected component (if applicable): 4.9.26 upgrade to 4.10.13

How reproducible: 5 out of 2200

Steps to Reproduce:
1. Disable console with managementState: Removed
2. Starting OCP version 4.9.26
3. Initiate upgrade to 4.10.13 via ClusterVersion CR

Actual results: Cluster upgrade is stuck (no longer progressing) for 5+ hours

Expected results: Cluster upgrade completes

Additional info:

This is a clone of issue OCPBUGS-1329. The following is the description of the original issue:

Description of problem:

etcd and kube-apiserver pods get restarted due to failed liveness probes while deleting/re-creating pods on SNO

Version-Release number of selected component (if applicable):

4.10.32

How reproducible:

Not always, after ~10 attempts

Steps to Reproduce:

1. Deploy SNO with Telco DU profile applied
2. Create multiple pods with local storage volumes attached(attaching yaml manifest)
3. Force delete and re-create pods 10 times

Actual results:

etcd and kube-apiserver pods get restarted, making to cluster unavailable for a period of time

Expected results:

etcd and kube-apiserver do not get restarted

Additional info:

Attaching must-gather.

Please let me know if any additional info is required. Thank you!

Description of problem:

Jenkins and Jenkins Agent Base image versions needs to be updated to use the latest images to mitigate known CVEs in plugins and Jenkins versions.

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

Description of problem:

IPI installation failed against 4.11 nightly build on Azure Stack Hub WWT.

workers machines failed to be provisioned as using the wrong image which does not exist.
$ oc get machine -n openshift-machine-api
NAME                                  PHASE     TYPE              REGION   ZONE   AGE
jima411az-xvwvg-master-0              Running   Standard_DS4_v2   mtcazs          3h10m
jima411az-xvwvg-master-1              Running   Standard_DS4_v2   mtcazs          3h10m
jima411az-xvwvg-master-2              Running   Standard_DS4_v2   mtcazs          3h10m
jima411az-xvwvg-worker-mtcazs-4k6hs   Failed                                      3h3m
jima411az-xvwvg-worker-mtcazs-fc6s5   Failed                                      3h3m
jima411az-xvwvg-worker-mtcazs-sclgf   Failed                                      3h3m

$ oc describe machine jima411az-xvwvg-worker-mtcazs-4k6hs -n openshift-machine-api
...
Events:
  Type     Reason        Age   From              Message
  ----     ------        ----  ----              -------
  Warning  FailedCreate  3h4m  azure-controller  InvalidConfiguration: failed to reconcile machine "jima411az-xvwvg-worker-mtcazs-4k6hs": failed to create vm jima411az-xvwvg-worker-mtcazs-4k6hs: failure sending request for machine jima411az-xvwvg-worker-mtcazs-4k6hs: cannot create vm: compute.VirtualMachinesClient#CreateOrUpdate: Failure sending request: StatusCode=404 -- Original Error: Code="NotFound" Message="The Image '/subscriptions/de7e09c3-b59a-4c7d-9c77-439c11b92879/resourceGroups/jima411az-xvwvg-rg/providers/Microsoft.Compute/images/jima411az-xvwvg-gen2' cannot be found in 'mtcazs' region."

The image created on ASH is `/subscriptions/de7e09c3-b59a-4c7d-9c77-439c11b92879/resourceGroups/jima411az-xvwvg-rg/providers/Microsoft.Compute/images/jima411az-xvwvg`

# az resource list -g jima411az-xvwvg-rg --query "[?type=='Microsoft.Compute/images']"
[
  {
    "changedTime": "2023-08-03T01:08:03.369233+00:00",
    "createdTime": "2023-08-03T00:57:34.228352+00:00",
    "id": "/subscriptions/de7e09c3-b59a-4c7d-9c77-439c11b92879/resourceGroups/jima411az-xvwvg-rg/providers/Microsoft.Compute/images/jima411az-xvwvg",
    "identity": null,
    "kind": null,
    "location": "mtcazs",
    "managedBy": null,
    "name": "jima411az-xvwvg",
    "plan": null,
    "properties": null,
    "provisioningState": "Succeeded",
    "resourceGroup": "jima411az-xvwvg-rg",
    "sku": null,
    "tags": {},
    "type": "Microsoft.Compute/images"
  }
]

Version-Release number of selected component (if applicable):

4.11.0-0.nightly-2023-07-29-013834

How reproducible:

Always on 4.11

Steps to Reproduce:

1. Deploy IPI with 4.11 on ASH WWT
2. 
3.

Actual results:

worker nodes failed to be provisioned

Expected results:

Installation is successful. 

Additional info:

Detect issue on 4.11, IPI installation works well on 4.12+.

This is a clone of issue OCPBUGS-3680. The following is the description of the original issue:

Description of problem:

OCP upgrade blocks because of cluster operator csi-snapshot-controller fails to start its deployment with a fatal message of read-only filesystem

Version-Release number of selected component (if applicable):

Red Hat OpenShift 4.11
rhacs-operator.v3.72.1

How reproducible:

At least once in user's cluster while upgrading 

Steps to Reproduce:

1. Have a OCP 4.11 installed
2. Install ACS on top of the OCP cluster
3. Upgrade OCP to the next z-stream version

Actual results:

Upgrade gets blocked: waiting on csi-snapshot-controller

Expected results:

Upgrade should succeed

Additional info:

stackrox SCCs (stackrox-admission-control, stackrox-collector and stackrox-sensor) contain the `readOnlyRootFilesystem` set to `true`, if not explicitly defined/requested, other Pods might receive this SCC which will make the deployment to fail with a `read-only filesystem` message

This is a clone of issue OCPBUGS-6517. The following is the description of the original issue:

Description of problem:

When the cluster is configured with Proxy the swift client in the image registry operator is not using the proxy to authenticate with OpenStack, so it's unable to reach the OpenStack API. This issue became evident since recently the support was added to not fallback to cinder in case swift is available[1].

[1]https://github.com/openshift/cluster-image-registry-operator/pull/819

 

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1. Deploy a cluster with proxy and restricted installation
2. 
3.

Actual results:

 

Expected results:

 

Additional info:

 

We have created a fix in 4.12 that fetches instance type information from Azure API instead of updating the lists. We feel that backporting that fix is too risky, but agreed to update the list in older versions.

Description of problem:

Add the following instance types to azure_instance_types list[1]:

  • Standard_D8s_v5
  • Standard_E8s_v5
  • Standard_E16s_v5

Version-Release number of selected component (if applicable):
OCP 4.8

Steps to Reproduce:
1. Migrate worker/infra nodes to above mentioned (missing) v5 instance types
2. "Failed to set autoscaling from zero annotations, instance type unknown"

Actual results:

  • "Failed to set autoscaling from zero annotations, instance type unknown"
  • New v5 instance types not officially tested/supported

Expected results:
The new instance types are available in the azure_instance_types list[1] and no errors/warnings are observed after migrating:

  • Standard_D8s_v5
  • Standard_E8s_v5
  • Standard_E16s_v5

Additional info:

The related v4 instance types are already available[1] - I suspect adding the mentioned v5 instance types is a minor update:

  • Standard_D8s_v4
  • Standard_E8s_v4
  • Standard_E16s_v4

1) azure_instance_types.go
https://github.com/openshift/cluster-api-provider-azure/blob/release-4.8/pkg/cloud/azure/actuators/machineset/azure_instance_types.go

Since 4.11 OCP comes with OperatorHub definition which declares a capability
and enables all catalog sources. For OKD we want to enable just community-operators
as users may not have Red Hat pull secret set.
This commit would ensure that OKD version of marketplace operator gets
its own OperatorHub manifest with a custom set of operator catalogs enabled

This is a clone of issue OCPBUGS-10977. The following is the description of the original issue:

This is a clone of issue OCPBUGS-10890. The following is the description of the original issue:

This is a clone of issue OCPBUGS-10649. The following is the description of the original issue:

Description of problem:

After a replace upgrade from OCP 4.14 image to another 4.14 image first node is in NotReady.

jiezhao-mac:hypershift jiezhao$ oc get node --kubeconfig=hostedcluster.kubeconfig 
NAME                     STATUS   ROLES  AGE   VERSION
ip-10-0-128-175.us-east-2.compute.internal  Ready   worker  72m   v1.26.2+06e8c46
ip-10-0-134-164.us-east-2.compute.internal  Ready   worker  68m   v1.26.2+06e8c46
ip-10-0-137-194.us-east-2.compute.internal  Ready   worker  77m   v1.26.2+06e8c46
ip-10-0-141-231.us-east-2.compute.internal  NotReady  worker  9m54s  v1.26.2+06e8c46

- lastHeartbeatTime: "2023-03-21T19:48:46Z"
  lastTransitionTime: "2023-03-21T19:42:37Z"
  message: 'container runtime network not ready: NetworkReady=false reason:NetworkPluginNotReady
   message:Network plugin returns error: No CNI configuration file in /etc/kubernetes/cni/net.d/.
   Has your network provider started?'
  reason: KubeletNotReady
  status: "False"
  type: Ready

Events:
 Type   Reason          Age         From          Message
 ----   ------          ----        ----          -------
 Normal  Starting         11m         kubelet        Starting kubelet.
 Normal  NodeHasSufficientMemory 11m (x2 over 11m)  kubelet        Node ip-10-0-141-231.us-east-2.compute.internal status is now: NodeHasSufficientMemory
 Normal  NodeHasNoDiskPressure  11m (x2 over 11m)  kubelet        Node ip-10-0-141-231.us-east-2.compute.internal status is now: NodeHasNoDiskPressure
 Normal  NodeHasSufficientPID   11m (x2 over 11m)  kubelet        Node ip-10-0-141-231.us-east-2.compute.internal status is now: NodeHasSufficientPID
 Normal  NodeAllocatableEnforced 11m         kubelet        Updated Node Allocatable limit across pods
 Normal  Synced          11m         cloud-node-controller Node synced successfully
 Normal  RegisteredNode      11m         node-controller    Node ip-10-0-141-231.us-east-2.compute.internal event: Registered Node ip-10-0-141-231.us-east-2.compute.internal in Controller
 Warning ErrorReconcilingNode   17s (x30 over 11m) controlplane      nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation

ovnkube-master log:

I0321 20:55:16.270197       1 default_network_controller.go:667] Node add failed for ip-10-0-141-231.us-east-2.compute.internal, will try again later: nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:55:16.270209       1 obj_retry.go:326] Retry add failed for *v1.Node ip-10-0-141-231.us-east-2.compute.internal, will try again later: nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:55:16.270273       1 event.go:285] Event(v1.ObjectReference{Kind:"Node", Namespace:"", Name:"ip-10-0-141-231.us-east-2.compute.internal", UID:"621e6289-ca5a-4e17-afff-5b49961cfb38", APIVersion:"v1", ResourceVersion:"52970", FieldPath:""}): type: 'Warning' reason: 'ErrorReconcilingNode' nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:55:17.851497       1 master.go:719] Adding or Updating Node "ip-10-0-137-194.us-east-2.compute.internal"
I0321 20:55:25.965132       1 master.go:719] Adding or Updating Node "ip-10-0-128-175.us-east-2.compute.internal"
I0321 20:55:45.928694       1 client.go:783]  "msg"="transacting operations" "database"="OVN_Northbound" "operations"="[{Op:update Table:NB_Global Row:map[options:{GoMap:map[e2e_timestamp:1679432145 mac_prefix:2e:f9:d8 max_tunid:16711680 northd_internal_version:23.03.1-20.27.0-70.6 northd_probe_interval:5000 svc_monitor_mac:fe:cb:72:cf:f8:5f use_logical_dp_groups:true]}] Rows:[] Columns:[] Mutations:[] Timeout:<nil> Where:[where column _uuid == {c8b24290-296e-44a2-a4d0-02db7e312614}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:}]"
I0321 20:55:46.270129       1 obj_retry.go:265] Retry object setup: *v1.Node ip-10-0-141-231.us-east-2.compute.internal
I0321 20:55:46.270154       1 obj_retry.go:319] Adding new object: *v1.Node ip-10-0-141-231.us-east-2.compute.internal
I0321 20:55:46.270164       1 master.go:719] Adding or Updating Node "ip-10-0-141-231.us-east-2.compute.internal"
I0321 20:55:46.270201       1 default_network_controller.go:667] Node add failed for ip-10-0-141-231.us-east-2.compute.internal, will try again later: nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:55:46.270209       1 obj_retry.go:326] Retry add failed for *v1.Node ip-10-0-141-231.us-east-2.compute.internal, will try again later: nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:55:46.270284       1 event.go:285] Event(v1.ObjectReference{Kind:"Node", Namespace:"", Name:"ip-10-0-141-231.us-east-2.compute.internal", UID:"621e6289-ca5a-4e17-afff-5b49961cfb38", APIVersion:"v1", ResourceVersion:"52970", FieldPath:""}): type: 'Warning' reason: 'ErrorReconcilingNode' nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:55:52.916512       1 reflector.go:559] k8s.io/client-go/informers/factory.go:134: Watch close - *v1.Namespace total 5 items received
I0321 20:56:06.910669       1 reflector.go:559] k8s.io/client-go/informers/factory.go:134: Watch close - *v1.Pod total 12 items received
I0321 20:56:15.928505       1 client.go:783]  "msg"="transacting operations" "database"="OVN_Northbound" "operations"="[{Op:update Table:NB_Global Row:map[options:{GoMap:map[e2e_timestamp:1679432175 mac_prefix:2e:f9:d8 max_tunid:16711680 northd_internal_version:23.03.1-20.27.0-70.6 northd_probe_interval:5000 svc_monitor_mac:fe:cb:72:cf:f8:5f use_logical_dp_groups:true]}] Rows:[] Columns:[] Mutations:[] Timeout:<nil> Where:[where column _uuid == {c8b24290-296e-44a2-a4d0-02db7e312614}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:}]"
I0321 20:56:16.269611       1 obj_retry.go:265] Retry object setup: *v1.Node ip-10-0-141-231.us-east-2.compute.internal
I0321 20:56:16.269637       1 obj_retry.go:319] Adding new object: *v1.Node ip-10-0-141-231.us-east-2.compute.internal
I0321 20:56:16.269646       1 master.go:719] Adding or Updating Node "ip-10-0-141-231.us-east-2.compute.internal"
I0321 20:56:16.269688       1 default_network_controller.go:667] Node add failed for ip-10-0-141-231.us-east-2.compute.internal, will try again later: nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:56:16.269697       1 obj_retry.go:326] Retry add failed for *v1.Node ip-10-0-141-231.us-east-2.compute.internal, will try again later: nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation
I0321 20:56:16.269724       1 event.go:285] Event(v1.ObjectReference{Kind:"Node", Namespace:"", Name:"ip-10-0-141-231.us-east-2.compute.internal", UID:"621e6289-ca5a-4e17-afff-5b49961cfb38", APIVersion:"v1", ResourceVersion:"52970", FieldPath:""}): type: 'Warning' reason: 'ErrorReconcilingNode' nodeAdd: error adding node "ip-10-0-141-231.us-east-2.compute.internal": could not find "k8s.ovn.org/node-subnets" annotation

cluster-network-operator log:

I0321 21:03:38.487602       1 log.go:198] Set operator conditions:
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "False"
  type: ManagementStateDegraded
- lastTransitionTime: "2023-03-21T19:53:10Z"
  message: DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" rollout is not making
    progress - last change 2023-03-21T19:42:39Z
  reason: RolloutHung
  status: "True"
  type: Degraded
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "True"
  type: Upgradeable
- lastTransitionTime: "2023-03-21T19:42:39Z"
  message: |-
    DaemonSet "/openshift-network-diagnostics/network-check-target" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-multus/multus" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-multus/network-metrics-daemon" is not available (awaiting 1 nodes)
  reason: Deploying
  status: "True"
  type: Progressing
- lastTransitionTime: "2023-03-21T17:39:26Z"
  status: "True"
  type: Available
I0321 21:03:38.488312       1 log.go:198] Skipping reconcile of Network.operator.openshift.io: spec unchanged
I0321 21:03:38.499825       1 log.go:198] Set ClusterOperator conditions:
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "False"
  type: ManagementStateDegraded
- lastTransitionTime: "2023-03-21T19:53:10Z"
  message: DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" rollout is not making
    progress - last change 2023-03-21T19:42:39Z
  reason: RolloutHung
  status: "True"
  type: Degraded
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "True"
  type: Upgradeable
- lastTransitionTime: "2023-03-21T19:42:39Z"
  message: |-
    DaemonSet "/openshift-network-diagnostics/network-check-target" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-multus/multus" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-multus/network-metrics-daemon" is not available (awaiting 1 nodes)
  reason: Deploying
  status: "True"
  type: Progressing
- lastTransitionTime: "2023-03-21T17:39:26Z"
  status: "True"
  type: Available
I0321 21:03:38.571013       1 log.go:198] Set HostedControlPlane conditions:
- lastTransitionTime: "2023-03-21T17:38:24Z"
  message: All is well
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: ValidAWSIdentityProvider
- lastTransitionTime: "2023-03-21T17:37:06Z"
  message: Configuration passes validation
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: ValidHostedControlPlaneConfiguration
- lastTransitionTime: "2023-03-21T19:24:24Z"
  message: ""
  observedGeneration: 3
  reason: QuorumAvailable
  status: "True"
  type: EtcdAvailable
- lastTransitionTime: "2023-03-21T17:38:23Z"
  message: Kube APIServer deployment is available
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: KubeAPIServerAvailable
- lastTransitionTime: "2023-03-21T20:26:29Z"
  message: ""
  observedGeneration: 3
  reason: AsExpected
  status: "False"
  type: Degraded
- lastTransitionTime: "2023-03-21T17:37:11Z"
  message: All is well
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: InfrastructureReady
- lastTransitionTime: "2023-03-21T17:37:06Z"
  message: External DNS is not configured
  observedGeneration: 3
  reason: StatusUnknown
  status: Unknown
  type: ExternalDNSReachable
- lastTransitionTime: "2023-03-21T19:24:24Z"
  message: ""
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: Available
- lastTransitionTime: "2023-03-21T17:37:06Z"
  message: Reconciliation active on resource
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: ReconciliationActive
- lastTransitionTime: "2023-03-21T17:38:25Z"
  message: All is well
  reason: AsExpected
  status: "True"
  type: AWSDefaultSecurityGroupCreated
- lastTransitionTime: "2023-03-21T19:30:54Z"
  message: 'Error while reconciling 4.14.0-0.nightly-2023-03-20-201450: the cluster
    operator network is degraded'
  observedGeneration: 3
  reason: ClusterOperatorDegraded
  status: "False"
  type: ClusterVersionProgressing
- lastTransitionTime: "2023-03-21T17:39:11Z"
  message: Condition not found in the CVO.
  observedGeneration: 3
  reason: StatusUnknown
  status: Unknown
  type: ClusterVersionUpgradeable
- lastTransitionTime: "2023-03-21T17:44:05Z"
  message: Done applying 4.14.0-0.nightly-2023-03-20-201450
  observedGeneration: 3
  reason: FromClusterVersion
  status: "True"
  type: ClusterVersionAvailable
- lastTransitionTime: "2023-03-21T19:55:15Z"
  message: Cluster operator network is degraded
  observedGeneration: 3
  reason: ClusterOperatorDegraded
  status: "True"
  type: ClusterVersionFailing
- lastTransitionTime: "2023-03-21T17:39:11Z"
  message: Payload loaded version="4.14.0-0.nightly-2023-03-20-201450" image="registry.ci.openshift.org/ocp/release:4.14.0-0.nightly-2023-03-20-201450"
    architecture="amd64"
  observedGeneration: 3
  reason: PayloadLoaded
  status: "True"
  type: ClusterVersionReleaseAccepted
- lastTransitionTime: "2023-03-21T17:39:21Z"
  message: ""
  reason: AsExpected
  status: "False"
  type: network.operator.openshift.io/ManagementStateDegraded
- lastTransitionTime: "2023-03-21T19:53:10Z"
  message: DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" rollout is not making
    progress - last change 2023-03-21T19:42:39Z
  reason: RolloutHung
  status: "True"
  type: network.operator.openshift.io/Degraded
- lastTransitionTime: "2023-03-21T17:39:21Z"
  message: ""
  reason: AsExpected
  status: "True"
  type: network.operator.openshift.io/Upgradeable
- lastTransitionTime: "2023-03-21T19:42:39Z"
  message: |-
    DaemonSet "/openshift-network-diagnostics/network-check-target" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-multus/multus" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-multus/network-metrics-daemon" is not available (awaiting 1 nodes)
  reason: Deploying
  status: "True"
  type: network.operator.openshift.io/Progressing
- lastTransitionTime: "2023-03-21T17:39:27Z"
  message: ""
  reason: AsExpected
  status: "True"
  type: network.operator.openshift.io/Available
I0321 21:03:39.450912       1 pod_watcher.go:125] Operand /, Kind= openshift-multus/multus updated, re-generating status
I0321 21:03:39.450953       1 pod_watcher.go:125] Operand /, Kind= openshift-multus/multus updated, re-generating status
I0321 21:03:39.493206       1 log.go:198] Set operator conditions:
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "False"
  type: ManagementStateDegraded
- lastTransitionTime: "2023-03-21T19:53:10Z"
  message: DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" rollout is not making
    progress - last change 2023-03-21T19:42:39Z
  reason: RolloutHung
  status: "True"
  type: Degraded
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "True"
  type: Upgradeable
- lastTransitionTime: "2023-03-21T19:42:39Z"
  message: |-
    DaemonSet "/openshift-multus/network-metrics-daemon" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-network-diagnostics/network-check-target" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" is not available (awaiting 1 nodes)
  reason: Deploying
  status: "True"
  type: Progressing
- lastTransitionTime: "2023-03-21T17:39:26Z"
  status: "True"
  type: Available
I0321 21:03:39.494050       1 log.go:198] Skipping reconcile of Network.operator.openshift.io: spec unchanged
I0321 21:03:39.508538       1 log.go:198] Set ClusterOperator conditions:
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "False"
  type: ManagementStateDegraded
- lastTransitionTime: "2023-03-21T19:53:10Z"
  message: DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" rollout is not making
    progress - last change 2023-03-21T19:42:39Z
  reason: RolloutHung
  status: "True"
  type: Degraded
- lastTransitionTime: "2023-03-21T17:39:21Z"
  status: "True"
  type: Upgradeable
- lastTransitionTime: "2023-03-21T19:42:39Z"
  message: |-
    DaemonSet "/openshift-multus/network-metrics-daemon" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-network-diagnostics/network-check-target" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" is not available (awaiting 1 nodes)
  reason: Deploying
  status: "True"
  type: Progressing
- lastTransitionTime: "2023-03-21T17:39:26Z"
  status: "True"
  type: Available
I0321 21:03:39.684429       1 log.go:198] Set HostedControlPlane conditions:
- lastTransitionTime: "2023-03-21T17:38:24Z"
  message: All is well
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: ValidAWSIdentityProvider
- lastTransitionTime: "2023-03-21T17:37:06Z"
  message: Configuration passes validation
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: ValidHostedControlPlaneConfiguration
- lastTransitionTime: "2023-03-21T19:24:24Z"
  message: ""
  observedGeneration: 3
  reason: QuorumAvailable
  status: "True"
  type: EtcdAvailable
- lastTransitionTime: "2023-03-21T17:38:23Z"
  message: Kube APIServer deployment is available
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: KubeAPIServerAvailable
- lastTransitionTime: "2023-03-21T20:26:29Z"
  message: ""
  observedGeneration: 3
  reason: AsExpected
  status: "False"
  type: Degraded
- lastTransitionTime: "2023-03-21T17:37:11Z"
  message: All is well
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: InfrastructureReady
- lastTransitionTime: "2023-03-21T17:37:06Z"
  message: External DNS is not configured
  observedGeneration: 3
  reason: StatusUnknown
  status: Unknown
  type: ExternalDNSReachable
- lastTransitionTime: "2023-03-21T19:24:24Z"
  message: ""
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: Available
- lastTransitionTime: "2023-03-21T17:37:06Z"
  message: Reconciliation active on resource
  observedGeneration: 3
  reason: AsExpected
  status: "True"
  type: ReconciliationActive
- lastTransitionTime: "2023-03-21T17:38:25Z"
  message: All is well
  reason: AsExpected
  status: "True"
  type: AWSDefaultSecurityGroupCreated
- lastTransitionTime: "2023-03-21T19:30:54Z"
  message: 'Error while reconciling 4.14.0-0.nightly-2023-03-20-201450: the cluster
    operator network is degraded'
  observedGeneration: 3
  reason: ClusterOperatorDegraded
  status: "False"
  type: ClusterVersionProgressing
- lastTransitionTime: "2023-03-21T17:39:11Z"
  message: Condition not found in the CVO.
  observedGeneration: 3
  reason: StatusUnknown
  status: Unknown
  type: ClusterVersionUpgradeable
- lastTransitionTime: "2023-03-21T17:44:05Z"
  message: Done applying 4.14.0-0.nightly-2023-03-20-201450
  observedGeneration: 3
  reason: FromClusterVersion
  status: "True"
  type: ClusterVersionAvailable
- lastTransitionTime: "2023-03-21T19:55:15Z"
  message: Cluster operator network is degraded
  observedGeneration: 3
  reason: ClusterOperatorDegraded
  status: "True"
  type: ClusterVersionFailing
- lastTransitionTime: "2023-03-21T17:39:11Z"
  message: Payload loaded version="4.14.0-0.nightly-2023-03-20-201450" image="registry.ci.openshift.org/ocp/release:4.14.0-0.nightly-2023-03-20-201450"
    architecture="amd64"
  observedGeneration: 3
  reason: PayloadLoaded
  status: "True"
  type: ClusterVersionReleaseAccepted
- lastTransitionTime: "2023-03-21T17:39:21Z"
  message: ""
  reason: AsExpected
  status: "False"
  type: network.operator.openshift.io/ManagementStateDegraded
- lastTransitionTime: "2023-03-21T19:53:10Z"
  message: DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" rollout is not making
    progress - last change 2023-03-21T19:42:39Z
  reason: RolloutHung
  status: "True"
  type: network.operator.openshift.io/Degraded
- lastTransitionTime: "2023-03-21T17:39:21Z"
  message: ""
  reason: AsExpected
  status: "True"
  type: network.operator.openshift.io/Upgradeable
- lastTransitionTime: "2023-03-21T19:42:39Z"
  message: |-
    DaemonSet "/openshift-multus/network-metrics-daemon" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-network-diagnostics/network-check-target" is not available (awaiting 1 nodes)
    DaemonSet "/openshift-ovn-kubernetes/ovnkube-node" is not available (awaiting 1 nodes)
  reason: Deploying
  status: "True"
  type: network.operator.openshift.io/Progressing
- lastTransitionTime: "2023-03-21T17:39:27Z"
  message: ""
  reason: AsExpected
  status: "True"
  type: network.operator.openshift.io/Available

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1. management cluster 4.13
2. bring up the hostedcluster and nodepool in 4.14.0-0.nightly-2023-03-19-234132
3. upgrade the hostedcluster to 4.14.0-0.nightly-2023-03-20-201450 
4. replace upgrade the nodepool to 4.14.0-0.nightly-2023-03-20-201450 

Actual results

First node is in NotReady

Expected results:

All nodes should be Ready

Additional info:

No issue with replace upgrade from 4.13 to 4.14

 

 

 

 

 

 

This is a clone of issue OCPBUGS-7650. The following is the description of the original issue:

This is a clone of issue OCPBUGS-672. The following is the description of the original issue:

Description of problem:

Redhat-operator part of the marketplace is failing regularly due to startup probe timing out connecting to registry-server container part of the same pod within 1 sec which in turn increases CPU/Mem usage on Master nodes:

62m         Normal    Scheduled                pod/redhat-operators-zb4j7                         Successfully assigned openshift-marketplace/redhat-operators-zb4j7 to ip-10-0-163-212.us-west-2.compute.internal by ip-10-0-149-93
62m         Normal    AddedInterface           pod/redhat-operators-zb4j7                         Add eth0 [10.129.1.112/23] from ovn-kubernetes
62m         Normal    Pulling                  pod/redhat-operators-zb4j7                         Pulling image "registry.redhat.io/redhat/redhat-operator-index:v4.11"
62m         Normal    Pulled                   pod/redhat-operators-zb4j7                         Successfully pulled image "registry.redhat.io/redhat/redhat-operator-index:v4.11" in 498.834447ms
62m         Normal    Created                  pod/redhat-operators-zb4j7                         Created container registry-server
62m         Normal    Started                  pod/redhat-operators-zb4j7                         Started container registry-server
62m         Warning   Unhealthy                pod/redhat-operators-zb4j7                         Startup probe failed: timeout: failed to connect service ":50051" within 1s
62m         Normal    Killing                  pod/redhat-operators-zb4j7                         Stopping container registry-server


Increasing the threshold of the probe might fix the problem:
  livenessProbe:
      exec:
        command:
        - grpc_health_probe
        - -addr=:50051
      failureThreshold: 3
      initialDelaySeconds: 10
      periodSeconds: 10
      successThreshold: 1
      timeoutSeconds: 5
    name: registry-server
    ports:
    - containerPort: 50051
      name: grpc
      protocol: TCP
    readinessProbe:
      exec:
        command:
        - grpc_health_probe
        - -addr=:50051
      failureThreshold: 3
      initialDelaySeconds: 5
      periodSeconds: 10
      successThreshold: 1
      timeoutSeconds: 5 

Version-Release number of selected component (if applicable):

 

How reproducible:

Always

Steps to Reproduce:

1. Install OSD cluster using 4.11.0-0.nightly-2022-08-26-162248 payload
2. Inspect redhat-operator pod in openshift-marketplace namespace
3. Observe the resource usage ( CPU and Memory ) of the pod 

Actual results:

Redhat-operator failing leading to increase to CPU and Mem usage on master nodes regularly during the startup

Expected results:

Redhat-operator startup probe succeeding and no spikes in resource on master nodes

Additional info:

Attached cpu, memory and event traces.

 

This is a clone of issue OCPBUGS-1417. The following is the description of the original issue:

Description of problem:

Egress IP is not being assigned to primary interface of node as per hostsubnet definition. The issue being observed at an Openshift cluster hosted on Disconnected AWS environment.  Following steps were performed at AWS end:

- Disconnected VPC was created and installation of Openshift was done as per documentation.
- Elastic IP could not be used as it is a disconnected environment. Customer identified a free IP from same subnet as the node and modified interface of the node to add a secondary IP.

It seems cloud.network.openshift.io/egress-ipconfig annotation is need on the node to attach IP to primary interface but its missing. From SDN POD log on the same node I  could see its complaining about 'an incomplete annotation "cloud.network.openshift.io/egress-ipconfig"'. Will share more details over comments.

Version-Release number of selected component (if applicable):

Openshift 4.10.28

How reproducible:

Always

Steps to Reproduce:

1. Create a disconnected environment on AWS
2. find a free IP from subnet where a worker node is hosted and add that as secondary  IP to NIC of that node.
3. Configure hostsubnet and netnamespace on Openshift cluster

Actual results:

- Eress IP is not being attached to primary interface of node for which hostsubnet has been configured

Expected results:

- Egress IP should get configured without any issue.

Additional info:


[Updated story request]

Decision is to always display Red Hat OpenShift logo for OCP instead of conditionally. And also update the OCP login, errors, providers templates. https://openshift.github.io/oauth-templates/

Related note in comments.

 

[Original request]

If the ACM or the ACS dynamic plugin is enabled and there is not a custom branding set, then the default "Red Hat Openshift" branding should be shown.

This was identified as an issue during the Hybrid Console Scrum on 11/15/20201

 

PRs associated with this change

https://github.com/openshift/console/pull/10940 [merged]

https://github.com/openshift/oauth-templates/pull/20 [merged]

https://github.com/openshift/cluster-authentication-operator/pull/540 [merged]

 

 

This is a 4.11.z backport.  By not backporting this change originally to 4.11 we introduced a mandatory flag for `opm serve` command without at least a 2-OCP-version runway as optional.   This is impacting customers on 4.11 clusters as well as dependent peer projects like oc-mirror.

 

-----------------------------

Description of problem:

opm serve fails with message:

Error: compute digest: compute hash: write tar: stat .: os: DirFS with empty root

Version-Release number of selected component (if applicable):

4.12

How reproducible:

100%

Steps to Reproduce:

(The easiest reproducer involves serving an empty catalog)

1. mkdir /tmp/catalog

2. using Dockerfile /tmp/catalog.Dockerfile based on 4.12 docs (https://access.redhat.com/documentation/en-us/openshift_container_platform/4.12/html-single/operators/index#olm-creating-fb-catalog-image_olm-managing-custom-catalogs
# The base image is expected to contain
# /bin/opm (with a serve subcommand) and /bin/grpc_health_probe
FROM registry.redhat.io/openshift4/ose-operator-registry:v4.12

# Configure the entrypoint and command
ENTRYPOINT ["/bin/opm"]
CMD ["serve", "/configs"]

# Copy declarative config root into image at /configs
ADD catalog /configs

# Set DC-specific label for the location of the DC root directory
# in the image
LABEL operators.operatorframework.io.index.configs.v1=/configs

3. build the image `cd /tmp/ && docker build -f catalog.Dockerfile .`

4. execute an instance of the container in docker/podman `docker run --name cat-run [image-file]`

5. error

Using a dockerfile generated from opm (`opm generate dockerfile [dir]`) works, but includes precache and cachedir options to opm.

 

Actual results:

Error: compute digest: compute hash: write tar: stat .: os: DirFS with empty root

Expected results:

opm generates cache in default /tmp/cache location and serves without error

Additional info:

 

 

Description of problem:

 

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

This is a clone of issue OCPBUGS-12914. The following is the description of the original issue:

This is a clone of issue OCPBUGS-12878. The following is the description of the original issue:

We want to add the dual-stack tests to the CNI plugin conformance test suite, for the currently supported releases.

(This has no impact on OpenShift itself. We're just modifying a test suite that OCP does not use.)

This is a clone of issue OCPBUGS-4851. The following is the description of the original issue:

This is a clone of issue OCPBUGS-4850. The following is the description of the original issue:

Description of problem:

Kuryr might take a while to create Pods because it has to create Neutron ports for the pods. If a pod gets deleted while this is being processed, a
warning Event will be generated causing the "[sig-network] pods should successfully create sandboxes by adding pod to network" to fail.

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

This is a clone of issue OCPBUGS-6018. The following is the description of the original issue:

This is a public clone of OCPBUGS-3821

The MCO can sometimes render a rendered-config in the middle of an upgrade with old MCs, e.g.:

  1. the containerruntimeconfigcontroller creates a new containerruntimeconfig due to the update
  2. the template controller finishes re-creating the base configs
  3. the kubeletconfig errors long enough and doesn't finish until after 2

This will cause the render controller to create a new rendered MC that uses the OLD kubeletconfig-MC, which at best is a double reboot for 1 node, and at worst block the update and break maxUnavailable nodes per pool.

Description of problem:

The IPI installation in some regions got bootstrap failure, and without any node available/ready.

Version-Release number of selected component (if applicable):

12-22 16:22:27.970  ./openshift-install 4.12.0-0.nightly-2022-12-21-202045
12-22 16:22:27.970  built from commit 3f9c38a5717c638f952df82349c45c7d6964fcd9
12-22 16:22:27.970  release image registry.ci.openshift.org/ocp/release@sha256:2d910488f25e2638b6d61cda2fb2ca5de06eee5882c0b77e6ed08aa7fe680270
12-22 16:22:27.971  release architecture amd64

How reproducible:

Always

Steps to Reproduce:

1. try the IPI installation in the problem regions (so far tried and failed with ap-southeast-2, ap-south-1, eu-west-1, ap-southeast-6, ap-southeast-3, ap-southeast-5, eu-central-1, cn-shanghai, cn-hangzhou and cn-beijing) 

Actual results:

Bootstrap failed to complete

Expected results:

Installation in those regions should succeed.

Additional info:

FYI the QE flexy-install job: https://mastern-jenkins-csb-openshift-qe.apps.ocp-c1.prod.psi.redhat.com/job/ocp-common/job/Flexy-install/166672/

No any node available/ready, and no any operator available.
$ oc get clusterversion
NAME      VERSION   AVAILABLE   PROGRESSING   SINCE   STATUS
version             False       True          30m     Unable to apply 4.12.0-0.nightly-2022-12-21-202045: an unknown error has occurred: MultipleErrors
$ oc get nodes
No resources found
$ oc get machines -n openshift-machine-api -o wide
NAME                         PHASE   TYPE   REGION   ZONE   AGE   NODE   PROVIDERID   STATE
jiwei-1222f-v729x-master-0                                  30m                       
jiwei-1222f-v729x-master-1                                  30m                       
jiwei-1222f-v729x-master-2                                  30m                       
$ oc get co
NAME                                       VERSION   AVAILABLE   PROGRESSING   DEGRADED   SINCE   MESSAGE
authentication
baremetal
cloud-controller-manager                                                                          
cloud-credential                                                                                  
cluster-autoscaler                                                                                
config-operator                                                                                   
console                                                                                           
control-plane-machine-set                                                                         
csi-snapshot-controller                                                                           
dns                                                                                               
etcd                                                                                              
image-registry                                                                                    
ingress                                                                                           
insights                                                                                          
kube-apiserver                                                                                    
kube-controller-manager                                                                           
kube-scheduler                                                                                    
kube-storage-version-migrator                                                                     
machine-api                                                                                       
machine-approver                                                                                  
machine-config                                                                                    
marketplace                                                                                       
monitoring                                                                                        
network                                                                                           
node-tuning                                                                                       
openshift-apiserver                                                                               
openshift-controller-manager                                                                      
openshift-samples                                                                                 
operator-lifecycle-manager                                                                        
operator-lifecycle-manager-catalog                                                                
operator-lifecycle-manager-packageserver
service-ca
storage
$

Mater nodes don't run for example kubelet and crio services.
[core@jiwei-1222f-v729x-master-0 ~]$ sudo crictl ps
FATA[0000] unable to determine runtime API version: rpc error: code = Unavailable desc = connection error: desc = "transport: Error while dialing dial unix /var/run/crio/crio.sock: connect: no such file or directory" 
[core@jiwei-1222f-v729x-master-0 ~]$ 

The machine-config-daemon firstboot tells "failed to update OS".
[jiwei@jiwei log-bundle-20221222085846]$ grep -Ei 'error|failed' control-plane/10.0.187.123/journals/journal.log 
Dec 22 16:24:16 localhost kernel: GPT: Use GNU Parted to correct GPT errors.
Dec 22 16:24:16 localhost kernel: GPT: Use GNU Parted to correct GPT errors.
Dec 22 16:24:18 localhost ignition[867]: failed to fetch config: resource requires networking
Dec 22 16:24:18 localhost ignition[891]: GET error: Get "http://100.100.100.200/latest/user-data": dial tcp 100.100.100.200:80: connect: network is unreachable
Dec 22 16:24:18 localhost ignition[891]: GET error: Get "http://100.100.100.200/latest/user-data": dial tcp 100.100.100.200:80: connect: network is unreachable
Dec 22 16:24:19 localhost.localdomain NetworkManager[919]: <info>  [1671726259.0329] hostname: hostname: hostnamed not used as proxy creation failed with: Could not connect: No such file or directory
Dec 22 16:24:19 localhost.localdomain NetworkManager[919]: <warn>  [1671726259.0464] sleep-monitor-sd: failed to acquire D-Bus proxy: Could not connect: No such file or directory
Dec 22 16:24:19 localhost.localdomain ignition[891]: GET error: Get "https://api-int.jiwei-1222f.alicloud-qe.devcluster.openshift.com:22623/config/master": dial tcp 10.0.187.120:22623: connect: connection refused
...repeated logs omitted...
Dec 22 16:27:46 jiwei-1222f-v729x-master-0 ovs-ctl[1888]: 2022-12-22T16:27:46Z|00001|dns_resolve|WARN|Failed to read /etc/resolv.conf: No such file or directory
Dec 22 16:27:46 jiwei-1222f-v729x-master-0 ovs-vswitchd[1888]: ovs|00001|dns_resolve|WARN|Failed to read /etc/resolv.conf: No such file or directory
Dec 22 16:27:46 jiwei-1222f-v729x-master-0 dbus-daemon[1669]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Dec 22 16:27:46 jiwei-1222f-v729x-master-0 nm-dispatcher[1924]: Error: Device '' not found.
Dec 22 16:27:46 jiwei-1222f-v729x-master-0 nm-dispatcher[1937]: Error: Device '' not found.
Dec 22 16:27:46 jiwei-1222f-v729x-master-0 nm-dispatcher[2037]: Error: Device '' not found.
Dec 22 08:35:32 jiwei-1222f-v729x-master-0 machine-config-daemon[2181]: Warning: failed, retrying in 1s ... (1/2)I1222 08:35:32.477770    2181 run.go:19] Running: nice -- ionice -c 3 oc image extract --path /:/run/mco-extensions/os-extensions-content-910221290 --registry-config /var/lib/kubelet/config.json quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:259d8c6b9ec714d53f0275db9f2962769f703d4d395afb9d902e22cfe96021b0
Dec 22 08:56:06 jiwei-1222f-v729x-master-0 rpm-ostree[2288]: Txn Rebase on /org/projectatomic/rpmostree1/rhcos failed: remote error: Get "https://quay.io/v2/openshift-release-dev/ocp-v4.0-art-dev/blobs/sha256:27f262e70d98996165748f4ab50248671d4a4f97eb67465cd46e1de2d6bd24d0": net/http: TLS handshake timeout
Dec 22 08:56:06 jiwei-1222f-v729x-master-0 machine-config-daemon[2181]: W1222 08:56:06.785425    2181 firstboot_complete_machineconfig.go:46] error: failed to update OS to quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:411e6e3be017538859cfbd7b5cd57fc87e5fee58f15df19ed3ec11044ebca511 : error running rpm-ostree rebase --experimental ostree-unverified-registry:quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:411e6e3be017538859cfbd7b5cd57fc87e5fee58f15df19ed3ec11044ebca511: Warning: The unit file, source configuration file or drop-ins of rpm-ostreed.service changed on disk. Run 'systemctl daemon-reload' to reload units.
Dec 22 08:56:06 jiwei-1222f-v729x-master-0 machine-config-daemon[2181]: error: remote error: Get "https://quay.io/v2/openshift-release-dev/ocp-v4.0-art-dev/blobs/sha256:27f262e70d98996165748f4ab50248671d4a4f97eb67465cd46e1de2d6bd24d0": net/http: TLS handshake timeout
Dec 22 08:57:31 jiwei-1222f-v729x-master-0 machine-config-daemon[2181]: Warning: failed, retrying in 1s ... (1/2)I1222 08:57:31.244684    2181 run.go:19] Running: nice -- ionice -c 3 oc image extract --path /:/run/mco-extensions/os-extensions-content-4021566291 --registry-config /var/lib/kubelet/config.json quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:259d8c6b9ec714d53f0275db9f2962769f703d4d395afb9d902e22cfe96021b0
Dec 22 08:59:20 jiwei-1222f-v729x-master-0 systemd[2353]: /usr/lib/systemd/user/podman-kube@.service:10: Failed to parse service restart specifier, ignoring: never
Dec 22 08:59:21 jiwei-1222f-v729x-master-0 podman[2437]: Error: open default: no such file or directory
Dec 22 08:59:21 jiwei-1222f-v729x-master-0 podman[2450]: Error: failed to start API service: accept unixgram @00026: accept4: operation not supported
Dec 22 08:59:21 jiwei-1222f-v729x-master-0 systemd[2353]: podman-kube@default.service: Failed with result 'exit-code'.
Dec 22 08:59:21 jiwei-1222f-v729x-master-0 systemd[2353]: Failed to start A template for running K8s workloads via podman-play-kube.
Dec 22 08:59:21 jiwei-1222f-v729x-master-0 systemd[2353]: podman.service: Failed with result 'exit-code'.
[jiwei@jiwei log-bundle-20221222085846]$ 

 

This is a clone of issue OCPBUGS-1717. The following is the description of the original issue:

Description of problem:

Image registry pods panic while deploying OCP in me-central-1 AWS region

Version-Release number of selected component (if applicable):

4.11.2

How reproducible:

Deploy OCP in AWS me-central-1 region

Steps to Reproduce:

Deploy OCP in AWS me-central-1 region 

Actual results:

panic: Invalid region provided: me-central-1

Expected results:

Image registry pods should come up with no errors

Additional info:

 

This is a clone of issue OCPBUGS-1549. The following is the description of the original issue:

Description of problem:

The cluster-dns-operator does not reconcile the openshift-dns namespace, which has been exposed as an issue in 4.12 due to the requirement for the namespace to have pod-security labels.

If a cluster has been incrementally updated from a version less than or equal to 4.9, the openshift-dns namespace will most likely not contain the required pod-security labels since the namespace was statically created when the cluster was installed with old namespace configuration.

Version-Release number of selected component (if applicable):

4.12

How reproducible:

Always if cluster originally installed with v4.9 or less

Steps to Reproduce:

1. Install v4.9
2. Upgrade to v4.12 (incrementally if required for upgrade path)
3. openshift-dns namespace will be missing pod-security labels

Actual results:

"oc get ns openshift-dns -o yaml" will show missing pod-security labels: 

apiVersion: v1
kind: Namespace
metadata:
  annotations:
    openshift.io/node-selector: ""
    openshift.io/sa.scc.mcs: s0:c15,c0
    openshift.io/sa.scc.supplemental-groups: 1000210000/10000
    openshift.io/sa.scc.uid-range: 1000210000/10000
  creationTimestamp: "2020-05-21T19:36:15Z"
  labels:
    kubernetes.io/metadata.name: openshift-dns
    olm.operatorgroup.uid/3d42c0c1-01cd-4c55-bf88-864f041c7e7a: ""
    openshift.io/cluster-monitoring: "true"
    openshift.io/run-level: "0"
  name: openshift-dns
  resourceVersion: "3127555382"
  uid: 0fb4571e-952f-4bea-bc45-461beec54369
spec:
  finalizers:
  - kubernetes

Expected results:

pod-security labels should exist:
 
 labels:
    kubernetes.io/metadata.name: openshift-dns
    olm.operatorgroup.uid/3d42c0c1-01cd-4c55-bf88-864f041c7e7a: ""
    openshift.io/cluster-monitoring: "true"
    openshift.io/run-level: "0"
    pod-security.kubernetes.io/audit: privileged
    pod-security.kubernetes.io/enforce: privileged
    pod-security.kubernetes.io/warn: privileged

Additional info:

Issue found in CI during upgrade

https://coreos.slack.com/archives/C03G7REB4JV/p1663676443155839 

This is a clone of issue OCPBUGS-683. The following is the description of the original issue:

Description of problem:


Version-Release number of selected component (if applicable):

{ 4.12.0-0.nightly-2022-08-21-135326 }
How reproducible:

Steps to Reproduce:

{See https://bugzilla.redhat.com/show_bug.cgi?id=2118563#c5,
The following messages here are "normal" on startup, but it is very misleading with error statement, suggest suppress them or update them to some more clear context that we can know they are in normal process.

E0818 02:18:53.709223       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-c955q': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-c955q, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:53.715530       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:53.735885       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:53.775984       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:53.790449       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-c955q': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-c955q, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:53.856911       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:53.950782       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-c955q': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-c955q, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:54.017583       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:54.271967       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-c955q': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-c955q, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:54.338944       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:54.916988       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-c955q': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-c955q, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue
E0818 02:18:54.982211       1 controller.go:165] error syncing 'br709bt-b5564-6jgdx-worker-0-sl9jn': error retrieving the private IP configuration for node: br709bt-b5564-6jgdx-worker-0-sl9jn, err: cannot parse valid nova server ID from providerId '', requeuing in node workqueue}


Actual results:


Expected results:


Additional info:


This is a clone of issue OCPBUGS-13739. The following is the description of the original issue:

This is a clone of issue OCPBUGS-13692. The following is the description of the original issue:

This is a clone of issue OCPBUGS-13549. The following is the description of the original issue:

Description of problem:

Incorrect AWS ARN [1] is used for GovCloud and AWS China regions, which will cause the command `ccoctl aws create-all` to fail:

Failed to create Identity provider: failed to apply public access policy to the bucket ci-op-bb5dgq54-77753-oidc: MalformedPolicy: Policy has invalid resource
	status code: 400, request id: VNBZ3NYDH6YXWFZ3, host id: pHF8v7C3vr9YJdD9HWamFmRbMaOPRbHSNIDaXUuUyrgy0gKCO9DDFU/Xy8ZPmY2LCjfLQnUDmtQ=

Correct AWS ARN prefix:
GovCloud (us-gov-east-1 and us-gov-west-1): arn:aws-us-gov
AWS China (cn-north-1 and cn-northwest-1): arn:aws-cn

[1] https://github.com/openshift/cloud-credential-operator/pull/526/files#diff-1909afc64595b92551779d9be99de733f8b694cfb6e599e49454b380afc58876R211


 

Version-Release number of selected component (if applicable):

4.12.0-0.nightly-2023-05-11-024616

How reproducible:

Always
 

Steps to Reproduce:

1. Run command: `aws create-all --name="${infra_name}" --region="${REGION}" --credentials-requests-dir="/tmp/credrequests" --output-dir="/tmp"` on GovCloud regions
2.
3.

Actual results:

Failed to create Identity provider
 

Expected results:

Create resources successfully.
 

Additional info:

Related PRs:
4.10: https://github.com/openshift/cloud-credential-operator/pull/531
4.11: https://github.com/openshift/cloud-credential-operator/pull/530
4.12: https://github.com/openshift/cloud-credential-operator/pull/529
4.13: https://github.com/openshift/cloud-credential-operator/pull/528
4.14: https://github.com/openshift/cloud-credential-operator/pull/526
 

This is a clone of issue OCPBUGS-5879. The following is the description of the original issue:

This is a clone of issue OCPBUGS-5505. The following is the description of the original issue:

Description of problem:

The upgradeability check in CVO is throttled (essentially cached) for a nondeterministic period of time, same as the minimal sync period computed at runtime. The period can be up to 4 minutes, determined at CVO start time as 2minutes * (0..1 + 1). We agreed with Trevor that such throttling is unnecessarily aggressive (the check is not that expensive). It also causes CI flakes, because the matching test only has 3 minutes timeout. Additionally, the non-determinism and longer throttling results makes UX worse by actions done in the cluster may have their observable effect delayed.

Version-Release number of selected component (if applicable):

discovered in 4.10 -> 4.11 upgrade jobs

How reproducible:

The test seems to flake ~10% of 4.10->4.11 Azure jobs (sippy). There does not seem to be that much impact on non-Azure jobs though which is a bit weird.

Steps to Reproduce:

Inspect the CVO log and E2E logs from failing jobs with the provided [^check-cvo.py] helper:

$ ./check-cvo.py cvo.log && echo PASS || echo FAIL

Preferably, inspect CVO logs of clusters that just underwent an upgrade (upgrades makes the original problematic behavior more likely to surface)

Actual results:

$ ./check-cvo.py openshift-cluster-version_cluster-version-operator-5b6966c474-g4kwk_cluster-version-operator.log && echo PASS || echo FAIL
FAIL: Cache hit at 11:59:55.332339 0:03:13.665006 after check at 11:56:41.667333
FAIL: Cache hit at 12:06:22.663215 0:03:13.664964 after check at 12:03:08.998251
FAIL: Cache hit at 12:12:49.997119 0:03:13.665598 after check at 12:09:36.331521
FAIL: Cache hit at 12:19:17.328510 0:03:13.664906 after check at 12:16:03.663604
FAIL: Cache hit at 12:25:44.662290 0:03:13.666759 after check at 12:22:30.995531
Upgradeability checks:           5
Upgradeability check cache hits: 12
FAIL

Note that the bug is probabilistic, so not all unfixed clusters will exhibit the behavior. My guess of the incidence rate is about 30-40%.

Expected result

$ ./check-cvo.py openshift-cluster-version_cluster-version-operator-7b8f85d455-mk9fs_cluster-version-operator.log && echo PASS || echo FAIL
Upgradeability checks:           12
Upgradeability check cache hits: 11
PASS

The actual numbers are not relevant (unless the upgradeabilily check count is zero, which means the test is not conclusive, the script warns about that), lack of failure is.

Additional info:

$ curl --silent https://gcsweb-ci.apps.ci.l2s4.p1.openshiftapps.com/gcs/origin-ci-test/logs/periodic-ci-openshift-release-master-ci-4.11-upgrade-from-stable-4.10-e2e-azure-upgrade/1607602927633960960/artifacts/e2e-azure-upgrade/gather-extra/artifacts/pods/openshift-cluster-version_cluster-version-operator-7b7d4b5bbd-zjqdt_cluster-version-operator.log | grep upgradeable.go
...
I1227 06:50:59.023190       1 upgradeable.go:122] Cluster current version=4.10.46
I1227 06:50:59.042735       1 upgradeable.go:42] Upgradeable conditions were recently checked, will try later.
I1227 06:51:14.024345       1 upgradeable.go:42] Upgradeable conditions were recently checked, will try later.
I1227 06:53:23.080768       1 upgradeable.go:42] Upgradeable conditions were recently checked, will try later.
I1227 06:56:59.366010       1 upgradeable.go:122] Cluster current version=4.11.0-0.ci-2022-12-26-193640

$ curl --silent https://gcsweb-ci.apps.ci.l2s4.p1.openshiftapps.com/gcs/origin-ci-test/logs/periodic-ci-openshift-release-master-ci-4.11-upgrade-from-stable-4.10-e2e-azure-upgrade/1607602927633960960/artifacts/e2e-azure-upgrade/openshift-e2e-test/artifacts/e2e.log | grep 'Kubernetes 1.25 and therefore OpenShift 4.12'
Dec 27 06:51:15.319: INFO: Waiting for Upgradeable to be AdminAckRequired for "Kubernetes 1.25 and therefore OpenShift 4.12 remove several APIs which require admin consideration. Please see the knowledge article https://access.redhat.com/articles/6955381 for details and instructions." ...
Dec 27 06:54:15.413: FAIL: Error while waiting for Upgradeable to complain about AdminAckRequired with message "Kubernetes 1.25 and therefore OpenShift 4.12 remove several APIs which require admin consideration. Please see the knowledge article https://access.redhat.com/articles/6955381 for details and instructions.": timed out waiting for the condition
The test passes. Also, the "Upgradeable conditions were recently checked, will try later." messages in CVO logs should never occur after a deterministic, short amount of time (I propose 1 minute) after upgradeability was checked.

I tested the throttling period in https://github.com/openshift/cluster-version-operator/pull/880. With the period of 15m, the test passrate was 4 of 9. Wiht the period of 1m, the test did not fail at all.

Some context in Slack thread

This is a clone of issue OCPBUGS-13183. The following is the description of the original issue:

This is a clone of issue OCPBUGS-10990. The following is the description of the original issue:

This is a clone of issue OCPBUGS-10526. The following is the description of the original issue:

Description of problem:


Version-Release number of selected component (if applicable):

 4.13.0-0.nightly-2023-03-17-161027 

How reproducible:

Always

Steps to Reproduce:

1.  Create a GCP XPN cluster with flexy job template ipi-on-gcp/versioned-installer-xpn-ci, then 'oc descirbe node'

2. Check logs for cloud-network-config-controller pods

Actual results:


 % oc get nodes
NAME                                                          STATUS   ROLES                  AGE    VERSION
huirwang-0309d-r85mj-master-0.c.openshift-qe.internal         Ready    control-plane,master   173m   v1.26.2+06e8c46
huirwang-0309d-r85mj-master-1.c.openshift-qe.internal         Ready    control-plane,master   173m   v1.26.2+06e8c46
huirwang-0309d-r85mj-master-2.c.openshift-qe.internal         Ready    control-plane,master   173m   v1.26.2+06e8c46
huirwang-0309d-r85mj-worker-a-wsrls.c.openshift-qe.internal   Ready    worker                 162m   v1.26.2+06e8c46
huirwang-0309d-r85mj-worker-b-5txgq.c.openshift-qe.internal   Ready    worker                 162m   v1.26.2+06e8c46
 `oc describe node`, there is no related egressIP annotations 
% oc describe node huirwang-0309d-r85mj-worker-a-wsrls.c.openshift-qe.internal 
Name:               huirwang-0309d-r85mj-worker-a-wsrls.c.openshift-qe.internal
Roles:              worker
Labels:             beta.kubernetes.io/arch=amd64
                    beta.kubernetes.io/instance-type=n2-standard-4
                    beta.kubernetes.io/os=linux
                    failure-domain.beta.kubernetes.io/region=us-central1
                    failure-domain.beta.kubernetes.io/zone=us-central1-a
                    kubernetes.io/arch=amd64
                    kubernetes.io/hostname=huirwang-0309d-r85mj-worker-a-wsrls.c.openshift-qe.internal
                    kubernetes.io/os=linux
                    machine.openshift.io/interruptible-instance=
                    node-role.kubernetes.io/worker=
                    node.kubernetes.io/instance-type=n2-standard-4
                    node.openshift.io/os_id=rhcos
                    topology.gke.io/zone=us-central1-a
                    topology.kubernetes.io/region=us-central1
                    topology.kubernetes.io/zone=us-central1-a
Annotations:        csi.volume.kubernetes.io/nodeid:
                      {"pd.csi.storage.gke.io":"projects/openshift-qe/zones/us-central1-a/instances/huirwang-0309d-r85mj-worker-a-wsrls"}
                    k8s.ovn.org/host-addresses: ["10.0.32.117"]
                    k8s.ovn.org/l3-gateway-config:
                      {"default":{"mode":"shared","interface-id":"br-ex_huirwang-0309d-r85mj-worker-a-wsrls.c.openshift-qe.internal","mac-address":"42:01:0a:00:...
                    k8s.ovn.org/node-chassis-id: 7fb1870c-4315-4dcb-910c-0f45c71ad6d3
                    k8s.ovn.org/node-gateway-router-lrp-ifaddr: {"ipv4":"100.64.0.5/16"}
                    k8s.ovn.org/node-mgmt-port-mac-address: 16:52:e3:8c:13:e2
                    k8s.ovn.org/node-primary-ifaddr: {"ipv4":"10.0.32.117/32"}
                    k8s.ovn.org/node-subnets: {"default":["10.131.0.0/23"]}
                    machine.openshift.io/machine: openshift-machine-api/huirwang-0309d-r85mj-worker-a-wsrls
                    machineconfiguration.openshift.io/controlPlaneTopology: HighlyAvailable
                    machineconfiguration.openshift.io/currentConfig: rendered-worker-bec5065070ded51e002c566a9c5bd16a
                    machineconfiguration.openshift.io/desiredConfig: rendered-worker-bec5065070ded51e002c566a9c5bd16a
                    machineconfiguration.openshift.io/desiredDrain: uncordon-rendered-worker-bec5065070ded51e002c566a9c5bd16a
                    machineconfiguration.openshift.io/lastAppliedDrain: uncordon-rendered-worker-bec5065070ded51e002c566a9c5bd16a
                    machineconfiguration.openshift.io/reason: 
                    machineconfiguration.openshift.io/state: Done
                    volumes.kubernetes.io/controller-managed-attach-detach: true


 % oc logs cloud-network-config-controller-5cd96d477d-2kmc9  -n openshift-cloud-network-config-controller  
W0320 03:00:08.981493       1 client_config.go:618] Neither --kubeconfig nor --master was specified.  Using the inClusterConfig.  This might not work.
I0320 03:00:08.982280       1 leaderelection.go:248] attempting to acquire leader lease openshift-cloud-network-config-controller/cloud-network-config-controller-lock...
E0320 03:00:38.982868       1 leaderelection.go:330] error retrieving resource lock openshift-cloud-network-config-controller/cloud-network-config-controller-lock: Get "https://api-int.huirwang-0309d.qe.gcp.devcluster.openshift.com:6443/api/v1/namespaces/openshift-cloud-network-config-controller/configmaps/cloud-network-config-controller-lock": dial tcp: lookup api-int.huirwang-0309d.qe.gcp.devcluster.openshift.com: i/o timeout
E0320 03:01:23.863454       1 leaderelection.go:330] error retrieving resource lock openshift-cloud-network-config-controller/cloud-network-config-controller-lock: Get "https://api-int.huirwang-0309d.qe.gcp.devcluster.openshift.com:6443/api/v1/namespaces/openshift-cloud-network-config-controller/configmaps/cloud-network-config-controller-lock": dial tcp: lookup api-int.huirwang-0309d.qe.gcp.devcluster.openshift.com on 172.30.0.10:53: read udp 10.129.0.14:52109->172.30.0.10:53: read: connection refused
I0320 03:02:19.249359       1 leaderelection.go:258] successfully acquired lease openshift-cloud-network-config-controller/cloud-network-config-controller-lock
I0320 03:02:19.250662       1 controller.go:88] Starting node controller
I0320 03:02:19.250681       1 controller.go:91] Waiting for informer caches to sync for node workqueue
I0320 03:02:19.250693       1 controller.go:88] Starting secret controller
I0320 03:02:19.250703       1 controller.go:91] Waiting for informer caches to sync for secret workqueue
I0320 03:02:19.250709       1 controller.go:88] Starting cloud-private-ip-config controller
I0320 03:02:19.250715       1 controller.go:91] Waiting for informer caches to sync for cloud-private-ip-config workqueue
I0320 03:02:19.258642       1 controller.go:182] Assigning key: huirwang-0309d-r85mj-master-2.c.openshift-qe.internal to node workqueue
I0320 03:02:19.258671       1 controller.go:182] Assigning key: huirwang-0309d-r85mj-master-1.c.openshift-qe.internal to node workqueue
I0320 03:02:19.258682       1 controller.go:182] Assigning key: huirwang-0309d-r85mj-master-0.c.openshift-qe.internal to node workqueue
I0320 03:02:19.351258       1 controller.go:96] Starting node workers
I0320 03:02:19.351303       1 controller.go:102] Started node workers
I0320 03:02:19.351298       1 controller.go:96] Starting secret workers
I0320 03:02:19.351331       1 controller.go:102] Started secret workers
I0320 03:02:19.351265       1 controller.go:96] Starting cloud-private-ip-config workers
I0320 03:02:19.351508       1 controller.go:102] Started cloud-private-ip-config workers
E0320 03:02:19.589704       1 controller.go:165] error syncing 'huirwang-0309d-r85mj-master-1.c.openshift-qe.internal': error retrieving the private IP configuration for node: huirwang-0309d-r85mj-master-1.c.openshift-qe.internal, err: error retrieving the network interface subnets, err: googleapi: Error 404: The resource 'projects/openshift-qe/regions/us-central1/subnetworks/installer-shared-vpc-subnet-1' was not found, notFound, requeuing in node workqueue
E0320 03:02:19.615551       1 controller.go:165] error syncing 'huirwang-0309d-r85mj-master-0.c.openshift-qe.internal': error retrieving the private IP configuration for node: huirwang-0309d-r85mj-master-0.c.openshift-qe.internal, err: error retrieving the network interface subnets, err: googleapi: Error 404: The resource 'projects/openshift-qe/regions/us-central1/subnetworks/installer-shared-vpc-subnet-1' was not found, notFound, requeuing in node workqueue
E0320 03:02:19.644628       1 controller.go:165] error syncing 'huirwang-0309d-r85mj-master-2.c.openshift-qe.internal': error retrieving the private IP configuration for node: huirwang-0309d-r85mj-master-2.c.openshift-qe.internal, err: error retrieving the network interface subnets, err: googleapi: Error 404: The resource 'projects/openshift-qe/regions/us-central1/subnetworks/installer-shared-vpc-subnet-1' was not found, notFound, requeuing in node workqueue
E0320 03:02:19.774047       1 controller.go:165] error syncing 'huirwang-0309d-r85mj-master-0.c.openshift-qe.internal': error retrieving the private IP configuration for node: huirwang-0309d-r85mj-master-0.c.openshift-qe.internal, err: error retrieving the network interface subnets, err: googleapi: Error 404: The resource 'projects/openshift-qe/regions/us-central1/subnetworks/installer-shared-vpc-subnet-1' was not found, notFound, requeuing in node workqueue
E0320 03:02:19.783309       1 controller.go:165] error syncing 'huirwang-0309d-r85mj-master-1.c.openshift-qe.internal': error retrieving the private IP configuration for node: huirwang-0309d-r85mj-master-1.c.openshift-qe.internal, err: error retrieving the network interface subnets, err: googleapi: Error 404: The resource 'projects/openshift-qe/regions/us-central1/subnetworks/installer-shared-vpc-subnet-1' was not found, notFound, requeuing in node workqueue
E0320 03:02:19.816430       1 controller.go:165] error syncing 'huirwang-0309d-r85mj-master-2.c.openshift-qe.internal': error retrieving the private IP configuration for node: huirwang-0309d-r85mj-master-2.c.openshift-qe.internal, err: error retrieving the network interface subnets, err: googleapi: Error 404: The resource 'projects/openshift-qe/regions/us-central1/subnetworks/installer-shared-vpc-subnet-1' was not found, notFound, requeuing in node workqueue

Expected results:

EgressIP should work

Additional info:

It can be reproduced in  4.12 as well, not regression issue.

This is a clone of issue OCPBUGS-1226. The following is the description of the original issue:

We added server groups for control plane and computes as part of OSASINFRA-2570, except for UPI that only creates server group for the control plane.

We need to update the UPI scripts to create server group for computes to be consistent with IPI and have the instruction at https://docs.openshift.com/container-platform/4.11/machine_management/creating_machinesets/creating-machineset-osp.html work out of the box in case customers want to create MachineSets on their UPI clusters.

Related to OCPCLOUD-1135.

Description of problem:

The metal3 Pod of openshift-machine-api is in CrashLoopBackOff status.

Version-Release number of selected component (if applicable):

4.10.31

How reproducible:

Always reproduce in IPv6

Steps to Reproduce:

1. Preparing to configure ipi on the provisioning node
   - RHEL 8 ( haproxy, named, mirror registry, rhcos_cache_server ..)

2. configuring the install-config.yaml (attached)
   - provisioningNetwork: disabled
   - machine network: only IPv6
   - disconnected installation
   
3. deploy the cluster 

Actual results:

It is not possible to add worker nodes because metal3 does not start normally.

Expected results:

metal3 starts normally in IPv6 environment

Additional info:

1. attached must-gather
https://drive.google.com/file/d/1GKxj3syROIMnURx_PYzOYhJdEuXBNXVW/view?usp=sharing

2. pod status
[kni@prov ~]$ oc get pod
NAME                                           READY   STATUS             RESTARTS          AGE
cluster-autoscaler-operator-6656bfd7b9-bt4j8   2/2     Running            0                 35h
cluster-baremetal-operator-6bbdd6758-rmxgq     2/2     Running            0                 35h
machine-api-controllers-55fb545b56-kl5sj       7/7     Running            0                 34h
machine-api-operator-845b6cf855-q7gdd          2/2     Running            0                 35h
metal3-574876cfdb-98fmz                        6/7     CrashLoopBackOff   179 (3m17s ago)   14h
metal3-image-cache-5mq2w                       1/1     Running            0                 14h
metal3-image-cache-nftpj                       1/1     Running            0                 14h
metal3-image-cache-t7whh                       1/1     Running            0                 14h
metal3-image-customization-68d4d6d99b-dbqgn    1/1     Running            0                 15h

[kni@prov ~]$ oc logs metal3-574876cfdb-98fmz -c metal3-httpd
AH00526: Syntax error on line 8 of /etc/httpd/conf.d/vmedia.conf:
The port number "2001:feed:101::102" is outside the appropriate range (i.e., 1..65535).

Description of problem:

During an upgrade from 4.10.0-0.nightly-2022-09-06-081345 -> 4.11.0-0.nightly-2022-09-06-074353

DNS operator stuck in progressing state with following error in dns-defalt pod

2022-09-07T00:47:35.959931289Z [WARNING] plugin/kubernetes: Kubernetes API connection failure: Get "https://172.30.0.1:443/version": dial tcp 172.30.0.1:443: i/o timeout

must-gather: http://shell.lab.bos.redhat.com/~anusaxen/must-gather-136172-050448657.tar.gz

Version-Release number of selected component (if applicable):

4.11.0-0.nightly-2022-09-06-074353

How reproducible:

Intermittent

Steps to Reproduce:

1. Perform upgrade from 4.10->4.11
2.
3.

Actual results:

Upgrade unsuccessful due to API svc unreachability

Expected results:

Upgrade should be successful

Additional info:

$ omg get co | grep -v "True.*False.*False"
NAME                                      VERSION                             AVAILABLE  PROGRESSING  DEGRADED  SINCE
dns                                       4.10.0-0.nightly-2022-09-06-081345  True       True         False     3h4m
network                                   4.11.0-0.nightly-2022-09-06-074353  True       True         False     3h5m

$ omg logs dns-default-5mqz4 -c dns -n openshift-dns
/home/anusaxen/Downloads/must-gather-136208-318613238/must-gather.local.4033693973186012455/quay-io-openshift-release-dev-ocp-v4-0-art-dev-sha256-d995e1608ba83a1f71b5a1c49705aa3cef38618e0674ee256332d1b0e2cb0e23/namespaces/openshift-dns/pods/dns-default-5mqz4/dns/dns/logs/current.log
2022-09-07T00:45:36.355161941Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:36.854403897Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:37.354367197Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:37.861427861Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:38.355095996Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:38.855063626Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:39.355170472Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:39.855296624Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:40.355481413Z [INFO] plugin/kubernetes: waiting for Kubernetes API before starting server
2022-09-07T00:45:40.855455283Z [WARNING] plugin/kubernetes: starting server with unsynced Kubernetes API
2022-09-07T00:45:40.856166731Z .:5353
2022-09-07T00:45:40.856166731Z [INFO] plugin/reload: Running configuration SHA512 = 7c3db3182389e270fe3af971fef9e7157a34bde01eb750d58c2d4895a965ecb2e2d00df34594b6a819653088b6efa2590e748ce23f9e16cbb0f44d74a4fc3587
2022-09-07T00:45:40.856166731Z CoreDNS-1.9.2
2022-09-07T00:45:40.856166731Z linux/amd64, go1.18.4, 
2022-09-07T00:46:05.957503195Z [WARNING] plugin/kubernetes: Kubernetes API connection failure: Get "https://172.30.0.1:443/version": dial tcp 172.30.0.1:443: i/o timeout
2022-09-07T00:47:25.444876534Z [INFO] SIGTERM: Shutting down servers then terminating
2022-09-07T00:47:25.444984367Z [INFO] plugin/health: Going into lameduck mode for 20s
2022-09-07T00:47:35.959931289Z [WARNING] plugin/kubernetes: Kubernetes API connection failure: Get "https://172.30.0.1:443/version": dial tcp 172.30.0.1:443: i/o timeout

Description of problem:

Upgrade to 4.10 is stuck looping in syncEgressFirewall

We see transacting operations with context deadline exceeded.

It looks to be trying to process 2.8 million records is one go.

2023-02-21T19:55:06.514097513Z I0221 19:55:06.435220 1 client.go:781] "msg"="transacting operations" "database"="OVN_Northbound" "operations"="[{Op:mutate Table:Logical_Switch Row:map[] Rows:[] Columns:[] Mutations:[{Column:acls Mutator:delete Value:{GoSet:[{GoUUID:6a3ad543-a77d-4700-83b8-5ccae6b2d067} ID:1c5297ff-8588-467a-93f4-22f22d609563} {GoUUID:f6288ed3-3928-45a8-ae57-40ed94cfa249} {GoUUID:04bf90c2-fde1-4a10-baaa-6a3f1d8e2931} {GoUUID:c6609536-857c-48ae-9125-9505753180 a8} {GoUUID:c79b4398-d7cc-4dcf-8c1d-11484f318324} {GoUUID:4323ac2c-033e-43c3-885b-e951cd7a4159} {GoUUID:7b316a80-076f-4266-b7d2-bd69b1d4b874} {GoUUID:57dfecb2-2f94-4cd8-a277-8 b28205e1048} {GoUUID:2c039f15-ff11-4ceb-aa82-bcbe82fc86d1} {GoUUID:063c4121-73c3-4d53-a89d-1063e775146b} {GoUUID:25c788e3-6146-4571-98bf-61010100a22a} {GoUUID:3d3c150f-1296-4d 91-b334-506f28bff4bd}]}}] Timeout:<nil> Where:[where column _uuid == {ba9652de-5aae-4a74-a512-29f775e38c19}] Until: Durable:<nil> Comment:<nil> Lock:<nil> UUIDName:}]: context deadline exceeded 

2023-02-21T19:55:18.739739417Z E0221 19:55:18.643127       1 master.go:1369] Failed (will retry) in syncing syncEgressFirewall: failed to remove reject acl from node logical switches: error while removing ACLS: [6a3ad543-a77d-4700-83b8-5ccae6b2d067 8e004991-0382-455f-9901-33ef724acbc2 

Everything is built into one operation via:
https://github.com/openshift/ovn-kubernetes/blob/release-4.10/go-controller/pkg/libovsdbops/switch.go#L243

TrandactAndCheck is being called with a 10s timeout and this operation never completes. 
 

Version-Release number of selected component (if applicable):

4.10.50

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

Upgrade completes

Additional info:

 

This is a clone of issue OCPBUGS-6672. The following is the description of the original issue:

This is a clone of issue OCPBUGS-4684. The following is the description of the original issue:

Description of problem:

In DeploymentConfig both the Form view and Yaml view are not in sync

Version-Release number of selected component (if applicable):

4.11.13

How reproducible:

Always

Steps to Reproduce:

1. Create a DC with selector and labels as given below
spec:
  replicas: 1
  selector:
    app: apigateway
    deploymentconfig: qa-apigateway
    environment: qa
  strategy:
    activeDeadlineSeconds: 21600
    resources: {}
    rollingParams:
      intervalSeconds: 1
      maxSurge: 25%
      maxUnavailable: 25%
      timeoutSeconds: 600
      updatePeriodSeconds: 1
    type: Rolling
  template:
    metadata:
      labels:
        app: apigateway
        deploymentconfig: qa-apigateway
        environment: qa

2. Now go to GUI--> Workloads--> DeploymentConfig --> Actions--> Edit DeploymentConfig, first go to Form view and now switch to Yaml view, the selector and labels shows as app: ubi8 while it should display app: apigateway

  selector:
    app: ubi8
    deploymentconfig: qa-apigateway
    environment: qa
  template:
    metadata:
      creationTimestamp: null
      labels:
        app: ubi8
        deploymentconfig: qa-apigateway
        environment: qa

3. Now in yaml view just click reload and the value is displayed as it is when it was created (app: apigateway).

Actual results:

 

Expected results:

 

Additional info:

 

This is a clone of issue OCPBUGS-11404. The following is the description of the original issue:

This is a clone of issue OCPBUGS-11333. The following is the description of the original issue:

This is a clone of issue OCPBUGS-10690. The following is the description of the original issue:

Description of problem:

according to PR: https://github.com/openshift/cluster-monitoring-operator/pull/1824, startupProbe for UWM prometheus/platform prometheus should be 1 hour, but startupProbe for UWM prometheus is still 15m after enabled UWM, platform promethues does not have issue, startupProbe is increased to 1 hour

$ oc -n openshift-user-workload-monitoring get pod prometheus-user-workload-0 -oyaml | grep startupProbe -A20
    startupProbe:
      exec:
        command:
        - sh
        - -c
        - if [ -x "$(command -v curl)" ]; then exec curl --fail http://localhost:9090/-/ready;
          elif [ -x "$(command -v wget)" ]; then exec wget -q -O /dev/null http://localhost:9090/-/ready;
          else exit 1; fi
      failureThreshold: 60
      periodSeconds: 15
      successThreshold: 1
      timeoutSeconds: 3
...

$ oc -n openshift-monitoring get pod prometheus-k8s-0 -oyaml | grep startupProbe -A20
    startupProbe:
      exec:
        command:
        - sh
        - -c
        - if [ -x "$(command -v curl)" ]; then exec curl --fail http://localhost:9090/-/ready;
          elif [ -x "$(command -v wget)" ]; then exec wget -q -O /dev/null http://localhost:9090/-/ready;
          else exit 1; fi
      failureThreshold: 240
      periodSeconds: 15
      successThreshold: 1
      timeoutSeconds: 3

 

Version-Release number of selected component (if applicable):

4.13.0-0.nightly-2023-03-19-052243

How reproducible:

always

Steps to Reproduce:

1. enable UWM, check startupProbe for UWM prometheus/platform prometheus
2.
3.

Actual results:

startupProbe for UWM prometheus is still 15m

Expected results:

startupProbe for UWM prometheus should be 1 hour

Additional info:

since startupProbe for platform prometheus is increased to 1 hour, and no similar bug for UWM prometheus, won't fix the issue is OK.

Description of problem:

AWS tagging - when applying user defined tags you cannot add more than 10

Version-Release number of selected component (if applicable):

 

How reproducible:

 

Steps to Reproduce:

1.
2.
3.

Actual results:

 

Expected results:

 

Additional info:

 

Description of problem:

Remove the self-provisioner role for the system authenticated users as per  https://access.redhat.com/solutions/4040541 to stop users from having the ability to create new projects, but the customer has found this is only partially working. It appears that when you use cluster Web UI Administrator view, the "Create Project" button is not available but switching to the default Developer view default user can create a project

Version-Release number of selected component (if applicable):

 

How reproducible:

Follow https://access.redhat.com/solutions/1529893

Steps to Reproduce:

1. oc adm policy remove-cluster-role-from-group self-provisioner system:authenticated:oauth
2. log back in as user and switch between admin/Dev view
3. User still has link showing in Dev console

Actual results:

Create new project link still exists

Expected results:

Create new project link should be removed, similar to Admin Console

 

Additional info:

Although the loink still exists, the user get's a correct permission denied message.

This is a clone of issue OCPBUGS-10372. The following is the description of the original issue:

This is a clone of issue OCPBUGS-10220. The following is the description of the original issue:

This is a clone of issue OCPBUGS-7559. The following is the description of the original issue:

Description of problem:

When attempting to add nodes to a long-lived 4.12.3 cluster, net new nodes are not able to join the cluster. They are provisioned in the cloud provider (AWS), but never actually join as a node.

Version-Release number of selected component (if applicable):

4.12.3

How reproducible:

Consistent

Steps to Reproduce:

1. On a long lived cluster, add a new machineset

Actual results:

Machines reach "Provisioned" but don't join the cluster

Expected results:

Machines join cluster as nodes

Additional info:


This is a copy of Bugzilla bug 2117524 for backport to 4.11.z

Original Text:

Description of problem:
On routers configured with mTLS and CRL defined in the CA with a CDP ; new CRL is downloaded only when restarting the ingress-operator.

2022-07-20T23:36:26.943Z	INFO	operator.clientca_configmap_controller	controller/controller.go:298	reconciling	{"request": "openshift-ingress-operator/service-bdrc"}
2022-07-20T23:36:26.943Z	INFO	operator.crl	crl/crl_configmap.go:69	certificate revocation list has expired	{"subject key identifier": "6aa909992e9890457b2a8de5659a44cab8e867a8"}
2022-07-20T23:36:26.943Z	INFO	operator.crl	crl/crl_configmap.go:69	retrieving certificate revocation list	{"subject key identifier": "6aa909992e9890457b2a8de5659a44cab8e867a8"}
2022-07-20T23:36:26.943Z	INFO	operator.crl	crl/crl_configmap.go:169	retrieving CRL distribution point	{"distribution point": "http://crl.domain.com/der/CN=XXXX,OU=XXX,O=XXX,C=XXX"}

Version-Release number of selected component (if applicable):
4.9.33

How reproducible:
Enable mTLS with a CRL

Actual results:
CRL is not download when expired
Clients get "SSL client certificate not trusted" errors while accessing resources

Expected results:
ingress-operator triggers CRL download when approaching expiration date so that the configmap is updated without manual action

This bug was initially created as a copy of
Bug #2096605
I am copying this bug because: the parent bug solved the validation aspect of diskType but now the description of diskType in
https://github.com/openshift/installer/blob/master/data/data/install.openshift.io_installconfigs.yaml#L2914-L2923
needs to be updated.

Version: 4.11.0-0.nightly-2022-06-06-201913

Platform: vSphere IPI

What happened?
1. If user inputs an invalid value for platform.vsphere.diskType in install-config.yaml file, there is no validation checking for diskType and doesn't exit with error, but continues the installation, which is not the same behavior as in 4.10.

After all vms are provisioned, I checked that the disk provision type is thick.

2. If user doesn't set platform.vsphere.diskType in install-config.yaml file, the default disk provision type is thick, but not the vSphere default storage policy. On VMC, the default policy is thin, so maybe the description of diskType should also need to be updated.

$ ./openshift-install explain installconfig.platform.vsphere.diskType
KIND: InstallConfig
VERSION: v1

RESOURCE: <string>
Valid Values: "","thin","thick","eagerZeroedThick"
DiskType is the name of the disk provisioning type, valid values are thin, thick, and eagerZeroedThick. When not specified, it will be set according to the default storage policy of vsphere.

What did you expect to happen?
validation for diskType

How to reproduce it (as minimally and precisely as possible)?
set diskType to invalid value in install-config.yaml and install the cluster

Our Prometheus alerts are inconsistent with both upstream and sometimes our own vendor folder. Let's do a clean update run before the next release is branched off.

This is a clone of issue OCPBUGS-17703. The following is the description of the original issue:

This is a clone of issue OCPBUGS-17365. The following is the description of the original issue:

When we update a Secret referenced in the BareMetalHost, an immediate reconcile of the corresponding BMH is not triggered. In most states we requeue each CR after a timeout, so we should eventually see the changes.

In the case of BMC Secrets, this has been broken since the fix for OCPBUGS-1080 in 4.12.

The kube-state-metric pod inside the openshift-monitoring namespace is not running as expected.

On checking the logs I am able to see that there is a memory panic

~~~
2022-11-22T09:57:17.901790234Z I1122 09:57:17.901768 1 main.go:199] Starting kube-state-metrics self metrics server: 127.0.0.1:8082
2022-11-22T09:57:17.901975837Z I1122 09:57:17.901951 1 main.go:66] levelinfomsgTLS is disabled.http2false
2022-11-22T09:57:17.902389844Z I1122 09:57:17.902291 1 main.go:210] Starting metrics server: 127.0.0.1:8081
2022-11-22T09:57:17.903191857Z I1122 09:57:17.903133 1 main.go:66] levelinfomsgTLS is disabled.http2false
2022-11-22T09:57:17.906272505Z I1122 09:57:17.906224 1 builder.go:191] Active resources: certificatesigningrequests,configmaps,cronjobs,daemonsets,deployments,endpoints,horizontalpodautoscalers,ingresses,jobs,leases,limitranges,mutatingwebhookconfigurations,namespaces,networkpolicies,nodes,persistentvolumeclaims,persistentvolumes,poddisruptionbudgets,pods,replicasets,replicationcontrollers,resourcequotas,secrets,services,statefulsets,storageclasses,validatingwebhookconfigurations,volumeattachments
2022-11-22T09:57:17.917758187Z E1122 09:57:17.917560 1 runtime.go:78] Observed a panic: "invalid memory address or nil pointer dereference" (runtime error: invalid memory address or nil pointer dereference)
2022-11-22T09:57:17.917758187Z goroutine 24 [running]:
2022-11-22T09:57:17.917758187Z k8s.io/apimachinery/pkg/util/runtime.logPanic(

{0x1635600, 0x2696e10})
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/vendor/k8s.io/apimachinery/pkg/util/runtime/runtime.go:74 +0x7d
2022-11-22T09:57:17.917758187Z k8s.io/apimachinery/pkg/util/runtime.HandleCrash({0x0, 0x0, 0xfffffffe})
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/vendor/k8s.io/apimachinery/pkg/util/runtime/runtime.go:48 +0x75
2022-11-22T09:57:17.917758187Z panic({0x1635600, 0x2696e10}

)
2022-11-22T09:57:17.917758187Z /usr/lib/golang/src/runtime/panic.go:1038 +0x215
2022-11-22T09:57:17.917758187Z k8s.io/kube-state-metrics/v2/internal/store.ingressMetricFamilies.func6(0x40)
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/internal/store/ingress.go:136 +0x189
2022-11-22T09:57:17.917758187Z k8s.io/kube-state-metrics/v2/internal/store.wrapIngressFunc.func1(

{0x17fe520, 0xc00063b590})
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/internal/store/ingress.go:175 +0x49
2022-11-22T09:57:17.917758187Z k8s.io/kube-state-metrics/v2/pkg/metric_generator.(*FamilyGenerator).Generate(...)
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/pkg/metric_generator/generator.go:67
2022-11-22T09:57:17.917758187Z k8s.io/kube-state-metrics/v2/pkg/metric_generator.ComposeMetricGenFuncs.func1({0x17fe520, 0xc00063b590}

)
2022-11-22T09:57:17.917758187Z /go/src/k8s.io/kube-state-metrics/pkg/metric_generator/generator.go:107 +0xd8
~~~

Logs are attached to the support case

Description of problem:

Created two egressIP object, egressIPs in one egressIP object cannot be applied successfully 

Version-Release number of selected component (if applicable):

4.11.0-0.nightly-2022-11-27-164248

How reproducible:

Frequently happen in auto case

Steps to Reproduce:

1.  Label two nodes as egress nodes
  oc get nodes -o wide
NAME                                   STATUS   ROLES    AGE    VERSION           INTERNAL-IP   EXTERNAL-IP   OS-IMAGE                                                        KERNEL-VERSION                 CONTAINER-RUNTIME
huirwang-1128a-s6j6t-master-0          Ready    master   154m   v1.24.6+5658434   10.0.0.8      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-master-1          Ready    master   154m   v1.24.6+5658434   10.0.0.7      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-master-2          Ready    master   153m   v1.24.6+5658434   10.0.0.6      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-worker-westus-1   Ready    worker   135m   v1.24.6+5658434   10.0.1.5      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8
huirwang-1128a-s6j6t-worker-westus-2   Ready    worker   136m   v1.24.6+5658434   10.0.1.4      <none>        Red Hat Enterprise Linux CoreOS 411.86.202211232221-0 (Ootpa)   4.18.0-372.32.1.el8_6.x86_64   cri-o://1.24.3-6.rhaos4.11.gitc4567c0.el8

 % oc get node huirwang-1128a-s6j6t-worker-westus-1 --show-labels
NAME                                   STATUS   ROLES    AGE    VERSION           LABELS
huirwang-1128a-s6j6t-worker-westus-1   Ready    worker   136m   v1.24.6+5658434   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/instance-type=Standard_D4s_v3,beta.kubernetes.io/os=linux,failure-domain.beta.kubernetes.io/region=westus,failure-domain.beta.kubernetes.io/zone=0,k8s.ovn.org/egress-assignable=true,kubernetes.io/arch=amd64,kubernetes.io/hostname=huirwang-1128a-s6j6t-worker-westus-1,kubernetes.io/os=linux,node-role.kubernetes.io/worker=,node.kubernetes.io/instance-type=Standard_D4s_v3,node.openshift.io/os_id=rhcos,topology.disk.csi.azure.com/zone=,topology.kubernetes.io/region=westus,topology.kubernetes.io/zone=0

 % oc get node huirwang-1128a-s6j6t-worker-westus-2 --show-labels
NAME                                   STATUS   ROLES    AGE    VERSION           LABELS
huirwang-1128a-s6j6t-worker-westus-2   Ready    worker   136m   v1.24.6+5658434   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/instance-type=Standard_D4s_v3,beta.kubernetes.io/os=linux,failure-domain.beta.kubernetes.io/region=westus,failure-domain.beta.kubernetes.io/zone=0,k8s.ovn.org/egress-assignable=true,kubernetes.io/arch=amd64,kubernetes.io/hostname=huirwang-1128a-s6j6t-worker-westus-2,kubernetes.io/os=linux,node-role.kubernetes.io/worker=,node.kubernetes.io/instance-type=Standard_D4s_v3,node.openshift.io/os_id=rhcos,topology.disk.csi.azure.com/zone=,topology.kubernetes.io/region=westus,topology.kubernetes.io/zone=0
2. Created two egressIP objects
3.

Actual results:

egressip-47032 was not applied to any egress node
% oc get egressip
NAME             EGRESSIPS    ASSIGNED NODE                          ASSIGNED EGRESSIPS
egressip-47032   10.0.1.166                                          
egressip-47034   10.0.1.181   huirwang-1128a-s6j6t-worker-westus-1   10.0.1.181

%  oc get cloudprivateipconfig                      
NAME         AGE
10.0.1.130   6m25s
10.0.1.138   6m34s
10.0.1.166   6m34s
10.0.1.181   6m25s
%  oc get cloudprivateipconfig  10.0.1.166  -o yaml
apiVersion: cloud.network.openshift.io/v1
kind: CloudPrivateIPConfig
metadata:
  annotations:
    k8s.ovn.org/egressip-owner-ref: egressip-47032
  creationTimestamp: "2022-11-28T10:27:37Z"
  finalizers:
  - cloudprivateipconfig.cloud.network.openshift.io/finalizer
  generation: 1
  name: 10.0.1.166
  resourceVersion: "87528"
  uid: 5221075a-35d0-4670-a6a7-ddfc6cbc700b
spec:
  node: huirwang-1128a-s6j6t-worker-westus-1
status:
  conditions:
  - lastTransitionTime: "2022-11-28T10:33:29Z"
    message: 'Error processing cloud assignment request, err: <nil>'
    observedGeneration: 1
    reason: CloudResponseError
    status: "False"
    type: Assigned
  node: huirwang-1128a-s6j6t-worker-westus-1
%  oc get cloudprivateipconfig  10.0.1.138  -o yaml 
apiVersion: cloud.network.openshift.io/v1
kind: CloudPrivateIPConfig
metadata:
  annotations:
    k8s.ovn.org/egressip-owner-ref: egressip-47032
  creationTimestamp: "2022-11-28T10:27:37Z"
  finalizers:
  - cloudprivateipconfig.cloud.network.openshift.io/finalizer
  generation: 1
  name: 10.0.1.138
  resourceVersion: "87523"
  uid: e4604e76-64d8-4735-87a2-eb50d28854cc
spec:
  node: huirwang-1128a-s6j6t-worker-westus-2
status:
  conditions:
  - lastTransitionTime: "2022-11-28T10:33:29Z"
    message: 'Error processing cloud assignment request, err: <nil>'
    observedGeneration: 1
    reason: CloudResponseError
    status: "False"
    type: Assigned
  node: huirwang-1128a-s6j6t-worker-westus-2

oc logs cloud-network-config-controller-6f7b994ddc-vhtbp  -n openshift-cloud-network-config-controller

.......
E1128 10:30:43.590807       1 controller.go:165] error syncing '10.0.1.138': error assigning CloudPrivateIPConfig: "10.0.1.138" to node: "huirwang-1128a-s6j6t-worker-westus-2", err: network.InterfacesClient#CreateOrUpdate: Failure sending request: StatusCode=0 -- Original Error: Code="InvalidRequestFormat" Message="Cannot parse the request." Details=[{"code":"DuplicateResourceName","message":"Resource /subscriptions//resourceGroups//providers/Microsoft.Network/networkInterfaces/ has two child resources with the same name (huirwang-1128a-s6j6t-worker-westus-2_10.0.1.138)."}], requeuing in cloud-private-ip-config workqueue
I1128 10:30:44.051422       1 cloudprivateipconfig_controller.go:271] CloudPrivateIPConfig: "10.0.1.166" will be added to node: "huirwang-1128a-s6j6t-worker-westus-1"
E1128 10:30:44.301259       1 controller.go:165] error syncing '10.0.1.166': error assigning CloudPrivateIPConfig: "10.0.1.166" to node: "huirwang-1128a-s6j6t-worker-westus-1", err: network.InterfacesClient#CreateOrUpdate: Failure sending request: StatusCode=0 -- Original Error: Code="InvalidRequestFormat" Message="Cannot parse the request." Details=[{"code":"DuplicateResourceName","message":"Resource /subscriptions//resourceGroups//providers/Microsoft.Network/networkInterfaces/ has two child resources with the same name (huirwang-1128a-s6j6t-worker-westus-1_10.0.1.166)."}], requeuing in cloud-private-ip-config workqueue
..........

Expected results:

EgressIP can be applied successfully.

Additional info:


Created attachment 1905034 [details]
Plugin page with error

Steps to reproduce:

1. Install a plugin with a page that has a runtime error. (Demo Plugin -> Dynamic Nav 1 currently has an error for me, but you can reproduce by editing any plugin and introducing an error.)
2. Observe the "something went wrong" error message.
3. Navigate to any other page (e.g. Workloads -> Pods)

Expected result:

The pods page is displayed.

Action result:

The error message persists. There is no way to clear except to refresh the browser.

Description of problem:
This is a clone of https://issues.redhat.com/browse/OCPBUGS-469

 

Description of problem: Numerous erroreneous logs in OVN master

I0823 18:00:11.163491       1 obj_retry.go:1063] Retry object setup: *v1.Pod openshift-operator-lifecycle-manager/collect-profiles-27687900-hlp6k
I0823 18:00:11.163546       1 obj_retry.go:1096] Removing old object: *v1.Pod openshift-operator-lifecycle-manager/collect-profiles-27687900-hlp6k
I0823 18:00:11.163555       1 pods.go:124] Deleting pod: openshift-operator-lifecycle-manager/collect-profiles-27687900-hlp6k
I0823 18:00:11.163631       1 obj_retry.go:1103] Retry delete failed for *v1.Pod openshift-operator-lifecycle-manager/collect-profiles-27687900-hlp6k, will try again later: deleteLogicalPort failed for pod openshift-operator-lifecycle-manager_collect-profiles-27687900-hlp6k: unable to locate portUUID+nodeName for pod openshift-operator-lifecycle-manager/collect-profiles-27687900-hlp6k: error getting logical port <nil>: object not found
W0823 18:00:41.163633       1 obj_retry.go:1031] Dropping retry entry for *v1.Pod openshift-operator-lifecycle-manager/collect-profiles-27687900-hlp6k: exceeded number of failed attempts

Must-gather: http://shell.lab.bos.redhat.com/~anusaxen/must-gather.local.2234927131259452300/

 

Version-Release number of selected component (if applicable): 4.12.0-0.nightly-2022-08-23-031342

How reproducible: Always

Steps to Reproduce:
1. Bring up OVN cluster on 4.12
2.
3.

Actual results: deleteLogicalPort failed for already gone object

Expected results: deleteLogicalPort should not keep retrying post object deletion

Additional info:

This is a clone of issue OCPBUGS-16151. The following is the description of the original issue:

This is a clone of issue OCPBUGS-13812. The following is the description of the original issue:

This is a clone of issue OCPBUGS-13718. The following is the description of the original issue:

Description of problem:

IPI install on azure stack failed when setting platform.azure.osDiks.diskType as StandardSSD_LRS in install-config.yaml.

When setting controlPlane.platform.azure.osDisk.diskType as StandardSSD_LRS, get error in terraform log and some resources have been created.

level=error msg=Error: expected storage_os_disk.0.managed_disk_type to be one of [Premium_LRS Standard_LRS], got StandardSSD_LRS
level=error
level=error msg=  with azurestack_virtual_machine.bootstrap,
level=error msg=  on main.tf line 107, in resource "azurestack_virtual_machine" "bootstrap":
level=error msg= 107: resource "azurestack_virtual_machine" "bootstrap" {
level=error
level=error msg=failed to fetch Cluster: failed to generate asset "Cluster": failure applying terraform for "bootstrap" stage: failed to create cluster: failed to apply Terraform: exit status 1
level=error
level=error msg=Error: expected storage_os_disk.0.managed_disk_type to be one of [Premium_LRS Standard_LRS], got StandardSSD_LRS
level=error
level=error msg=  with azurestack_virtual_machine.bootstrap,
level=error msg=  on main.tf line 107, in resource "azurestack_virtual_machine" "bootstrap":
level=error msg= 107: resource "azurestack_virtual_machine" "bootstrap" {
level=error
level=error

When setting compute.platform.azure.osDisk.diskType as StandardSSD_LRS, fail to provision compute machines

$ oc get machine -n openshift-machine-api
NAME                                     PHASE     TYPE              REGION   ZONE   AGE
jima414ash03-xkq5x-master-0              Running   Standard_DS4_v2   mtcazs          62m
jima414ash03-xkq5x-master-1              Running   Standard_DS4_v2   mtcazs          62m
jima414ash03-xkq5x-master-2              Running   Standard_DS4_v2   mtcazs          62m
jima414ash03-xkq5x-worker-mtcazs-89mgn   Failed                                      52m
jima414ash03-xkq5x-worker-mtcazs-jl5kk   Failed                                      52m
jima414ash03-xkq5x-worker-mtcazs-p5kvw   Failed                                      52m

$ oc describe machine jima414ash03-xkq5x-worker-mtcazs-jl5kk -n openshift-machine-api
...
  Error Message:           failed to reconcile machine "jima414ash03-xkq5x-worker-mtcazs-jl5kk": failed to create vm jima414ash03-xkq5x-worker-mtcazs-jl5kk: failure sending request for machine jima414ash03-xkq5x-worker-mtcazs-jl5kk: cannot create vm: compute.VirtualMachinesClient#CreateOrUpdate: Failure sending request: StatusCode=400 -- Original Error: Code="InvalidParameter" Message="Storage account type 'StandardSSD_LRS' is supported by Microsoft.Compute API version 2018-04-01 and above" Target="osDisk.managedDisk.storageAccountType"
...

Based on azure-stack doc[1], supported disk types on ASH are Premium SSD, Standard HDD. It's better to do validation for diskType on Azure Stack to avoid above errors.

[1]https://learn.microsoft.com/en-us/azure-stack/user/azure-stack-managed-disk-considerations?view=azs-2206&tabs=az1%2Caz2#cheat-sheet-managed-disk-differences

Version-Release number of selected component (if applicable):

4.14.0-0.nightly-2023-05-16-085836

How reproducible:

Always

Steps to Reproduce:

1. Prepare install-config.yaml, set platform.azure.osDiks.diskType as StandardSSD_LRS
2. Install IPI cluster on Azure Stack
3.

Actual results:

Installation failed

Expected results:

Installer validate diskType on AzureStack Cloud, and exit for unsupported disk type with error message

Additional info:

 

This is a clone of issue OCPBUGS-5092. The following is the description of the original issue:

This is a clone of issue OCPBUGS-3314. The following is the description of the original issue:

Description of problem:

triggers[].gitlab.secretReference[1] disappears when a 'buildconfig' is edited on ‘From View’

Version-Release number of selected component (if applicable):

4.10.32

How reproducible:

Always

Steps to Reproduce:

1. Configure triggers[].gitlab.secretReference[1] as below 

~~~
spec:
 .. 
  triggers:
    - type: ConfigChange
    - type: GitLab
      gitlab:
        secretReference:
          name: m24s40-githook
~~~
2. Open ‘Edit BuildConfig’ buildconfig  with ‘From’ View:
 - Buildconfigs -> Actions -> Edit Buildconfig

3. Click ‘YAML view’ on top. 

Actual results:

The 'secretReference' configured earlier has disappeared. You can click [Reload] button which will bring the configuration back.

Expected results:

'secretReference' configured in buildconfigs do not disappear. 

Additional info:


[1]https://docs.openshift.com/container-platform/4.10/rest_api/workloads_apis/buildconfig-build-openshift-io-v1.html#spec-triggers-gitlab-secretreference